From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-fsl-qoriq master
Date: Fri, 30 Oct 2015 09:26:50 -0700 [thread overview]
Message-ID: <56339A4A.9040606@freescale.com> (raw)
Tom,
The following changes since commit 677f970bc62a661690b3431543d5a5d5e682ba70:
common/board_f.c: modify the macro to use get_clocks() more common (2015-10-24
13:50:38 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 7ee52af455c2cec7b674d2159806f7e95da8e6a5:
ls102xa: Adjust some macros for SD boot on LS1021A QDS board (2015-10-30
09:19:48 -0700)
----------------------------------------------------------------
Alison Wang (5):
armv8/fsl-lsch3: fdt: Check the pointer returned from call to a function
may be NULL
arm: ls1021a: Add QSPI or IFC support in SD boot
ls102xa: fdt: Disable IFC in SD boot for QSPI
arm: ls102xa: Set fdt_high and initrd_high to the value of 0xffffffff
ls102xa: Adjust some macros for SD boot on LS1021A QDS board
Aneesh Bansal (4):
Pointers in ESBC header made 32 bit
Data types defined for 64 bit physical address
crypto/fsl: SEC driver cleanup for 64 bit and endianness
SECURE_BOOT: Correct reading of ITS bit
Gong Qianyu (3):
common/board_f.c: change the macro name and remove it for PPC platforms
armv8/ls1043ardb: Add nand boot support
armv8/ls1043ardb: Add sd boot support
Hou Zhiqiang (4):
net/fm: Fix the endian issue to support both endianness platforms
net/fm: Add support for 64-bit platforms
net/fm: Make the return value logic consistent with convention
armv8/ls1043a: Enable secondary cores
Joakim Tjernlund (1):
drivers/ddr/fsl_ddr: Make SR_IE configurable
Mingkai Hu (4):
armv7/ls1021a: move ns_access to common file
armv8/fsl_lsch3: Change arch to fsl-layerscape
armv8/fsl_lsch2: Add fsl_lsch2 SoC
armv8/ls1043ardb: Add LS1043ARDB board support
Prabhakar Kushwaha (2):
driver: net: ldpaa_eth: Set MAC address during interface open
armv8: ls2085a: Add support of random MAC address
Scott Wood (2):
arm/fsl-ls: Add CONFIG_OF_STDOUT_VIA_ALIAS
fdt_support: Don't panic if stdout alias is missing
Shaohui Xie (6):
armv8: ls2085ardb: enable CONFIG_PHY_AQUANTIA
net: fm: bug fix when CONFIG_PHYLIB not defined
net: Move some header files to include/
net/fm: Add QSGMII PCS init
net/fm: fix MDIO controller base on FMAN2
armv8/ls1043a: Add Fman support
Yangbo Lu (1):
armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb
Yao Yuan (1):
configs: ls1021atwr: Enable ID EEPROM for SD boot
Zhao Qiang (1):
QE: modify the address of qe ucode
horia.geanta at freescale.com (1):
arm: ls102xa: enable snooping for CAAM transactions
tang yuantian (2):
arm: ls1021a: Add sata support on qds and twr board
arm: ls1021atwr: optimize the deep sleep latency
Makefile | 4 +
arch/arm/Kconfig | 9 +
arch/arm/cpu/armv7/ls102xa/Makefile | 1 +
arch/arm/cpu/armv7/ls102xa/cpu.c | 3 +
arch/arm/cpu/armv7/ls102xa/fdt.c | 2 +-
arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c | 42 ++
arch/arm/cpu/armv8/Makefile | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 30 ++
arch/arm/cpu/armv8/fsl-layerscape/README.lsch2 | 10 +
.../README => fsl-layerscape/README.lsch3} | 2 +-
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/cpu.c | 273 +++-------
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/cpu.h | 2 +-
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/fdt.c | 25 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 117 +++++
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 180 +++++++
.../fsl_lsch3_serdes.c | 8 +-
.../speed.c => fsl-layerscape/fsl_lsch3_speed.c} | 12 +-
.../armv8/{fsl-lsch3 => fsl-layerscape}/lowlevel.S | 14 +-
arch/arm/cpu/armv8/fsl-layerscape/ls1043a_serdes.c | 86 +++
.../{fsl-lsch3 => fsl-layerscape}/ls2085a_serdes.c | 3 +-
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/mp.c | 30 +-
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/soc.c | 42 +-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 79 +++
arch/arm/cpu/armv8/fsl-lsch3/Makefile | 13 -
arch/arm/cpu/armv8/fsl-lsch3/speed.h | 7 -
.../clock.h | 8 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 143 +++++
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 229 ++++++++
.../{arch-fsl-lsch3 => arch-fsl-layerscape}/fdt.h | 4 +
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 157 ++++++
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 555 ++++++++++++++++++++
.../immap_lsch3.h | 119 ++++-
.../arm/include/asm/arch-fsl-layerscape/imx-regs.h | 55 ++
.../ls2085a_stream_id.h | 0
arch/arm/include/asm/arch-fsl-layerscape/mmu.h | 10 +
.../asm/arch-fsl-layerscape}/mp.h | 10 +-
.../include/asm/arch-fsl-layerscape/ns_access.h | 158 ++++++
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 53 ++
arch/arm/include/asm/arch-fsl-layerscape/speed.h | 10 +
arch/arm/include/asm/arch-fsl-lsch3/config.h | 185 -------
arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h | 67 ---
arch/arm/include/asm/arch-fsl-lsch3/gpio.h | 9 -
arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h | 13 -
arch/arm/include/asm/arch-fsl-lsch3/soc.h | 28 -
arch/arm/include/asm/arch-ls102xa/config.h | 15 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 25 +
arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h | 11 +
arch/arm/include/asm/arch-ls102xa/ns_access.h | 103 +++-
arch/arm/include/asm/armv8/mmu.h | 1 +
arch/arm/include/asm/config.h | 7 +-
arch/arm/include/asm/io.h | 4 +-
arch/arm/include/asm/types.h | 10 +-
arch/powerpc/include/asm/immap_85xx.h | 2 +-
board/freescale/b4860qds/eth_b4860qds.c | 2 +-
board/freescale/common/Makefile | 2 +-
board/freescale/common/arm_sleep.c | 4 -
board/freescale/common/fman.c | 6 +-
board/freescale/common/fsl_validate.c | 22 +-
board/freescale/common/ns_access.c | 8 +-
board/freescale/corenet_ds/eth_hydra.c | 2 +-
board/freescale/corenet_ds/eth_p4080.c | 2 +-
board/freescale/corenet_ds/eth_superhydra.c | 2 +-
board/freescale/ls1021aqds/ls1021aqds.c | 113 +---
board/freescale/ls1021atwr/MAINTAINERS | 3 +-
board/freescale/ls1021atwr/ls1021atwr.c | 147 ++----
board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg | 14 -
board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg | 8 +
board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg | 8 +
board/freescale/ls1043ardb/Kconfig | 16 +
board/freescale/ls1043ardb/MAINTAINERS | 7 +
board/freescale/ls1043ardb/Makefile | 10 +
board/freescale/ls1043ardb/README | 87 +++
board/freescale/ls1043ardb/cpld.c | 152 ++++++
board/freescale/ls1043ardb/cpld.h | 45 ++
board/freescale/ls1043ardb/ddr.c | 191 +++++++
board/freescale/ls1043ardb/ddr.h | 45 ++
board/freescale/ls1043ardb/eth.c | 77 +++
board/freescale/ls1043ardb/ls1043ardb.c | 142 +++++
board/freescale/ls1043ardb/ls1043ardb_pbi.cfg | 14 +
board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg | 7 +
board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg | 7 +
board/freescale/ls2085a/Kconfig | 4 +-
board/freescale/ls2085a/ls2085a.c | 2 +-
board/freescale/ls2085aqds/Kconfig | 2 +-
board/freescale/ls2085aqds/eth.c | 1 -
board/freescale/ls2085aqds/ls2085aqds.c | 2 +-
board/freescale/ls2085ardb/Kconfig | 2 +-
board/freescale/ls2085ardb/eth_ls2085rdb.c | 1 -
board/freescale/ls2085ardb/ls2085ardb.c | 2 +-
board/freescale/p1023rdb/p1023rdb.c | 2 +-
board/freescale/p2041rdb/eth.c | 2 +-
board/freescale/t102xqds/eth_t102xqds.c | 2 +-
board/freescale/t102xrdb/eth_t102xrdb.c | 2 +-
board/freescale/t1040qds/eth.c | 2 +-
board/freescale/t104xrdb/eth.c | 2 +-
board/freescale/t208xqds/eth_t208xqds.c | 2 +-
board/freescale/t208xrdb/eth_t208xrdb.c | 2 +-
board/freescale/t4qds/eth.c | 2 +-
board/freescale/t4rdb/eth.c | 2 +-
common/board_f.c | 2 +-
common/fdt_support.c | 11 +-
...d_defconfig => ls1021atwr_sdcard_ifc_defconfig} | 1 -
configs/ls1021atwr_sdcard_qspi_defconfig | 11 +
configs/ls1043ardb_defconfig | 4 +
configs/ls1043ardb_nand_defconfig | 4 +
configs/ls1043ardb_sdcard_defconfig | 4 +
configs/ls2085a_simu_defconfig | 1 +
configs/ls2085aqds_defconfig | 1 +
configs/ls2085aqds_nand_defconfig | 1 +
configs/ls2085ardb_defconfig | 1 +
configs/ls2085ardb_nand_defconfig | 1 +
doc/README.fsl-clk | 6 +
doc/README.fsl-dpaa | 4 +-
drivers/crypto/fsl/desc_constr.h | 26 +
drivers/crypto/fsl/fsl_hash.c | 8 +-
drivers/crypto/fsl/jr.c | 86 ++-
drivers/crypto/fsl/jr.h | 7 +-
drivers/ddr/fsl/ctrl_regs.c | 2 +-
drivers/i2c/mxc_i2c.c | 4 +-
drivers/misc/fsl_debug_server.c | 1 -
drivers/mmc/fsl_esdhc.c | 12 +-
drivers/net/fm/Makefile | 1 +
drivers/net/fm/dtsec.c | 2 +-
drivers/net/fm/eth.c | 195 ++++---
drivers/net/fm/fm.c | 31 +-
drivers/net/fm/fm.h | 14 +-
drivers/net/fm/init.c | 10 +-
drivers/net/fm/ls1043.c | 119 +++++
drivers/net/fm/tgec.c | 2 +-
drivers/net/fm/tgec_phy.c | 2 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 15 +-
drivers/net/ldpaa_eth/ls2085a.c | 2 -
drivers/pci/pcie_layerscape.c | 4 +-
include/common.h | 6 +
include/configs/BSC9132QDS.h | 1 -
include/configs/MPC8308RDB.h | 1 -
include/configs/MPC837XEMDS.h | 1 -
include/configs/MPC837XERDB.h | 1 -
include/configs/MPC8536DS.h | 1 -
include/configs/MPC8569MDS.h | 1 -
include/configs/P1010RDB.h | 1 -
include/configs/P1022DS.h | 1 -
include/configs/P2041RDB.h | 1 -
include/configs/T102xQDS.h | 1 -
include/configs/T102xRDB.h | 1 -
include/configs/T1040QDS.h | 1 -
include/configs/T104xRDB.h | 1 -
include/configs/T208xQDS.h | 1 -
include/configs/T208xRDB.h | 1 -
include/configs/T4240QDS.h | 1 -
include/configs/T4240RDB.h | 1 -
include/configs/UCP1020.h | 1 -
include/configs/colibri_vf.h | 2 +-
include/configs/controlcenterd.h | 1 -
include/configs/corenet_ds.h | 1 -
include/configs/hrcon.h | 1 -
include/configs/ls1021aqds.h | 11 +-
include/configs/ls1021atwr.h | 36 +-
include/configs/ls1043a_common.h | 255 +++++++++
include/configs/ls1043ardb.h | 271 ++++++++++
include/configs/ls2085a_common.h | 11 +-
include/configs/ls2085aqds.h | 2 +-
include/configs/ls2085ardb.h | 3 +-
include/configs/m53evk.h | 2 +-
include/configs/mx25pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6_common.h | 2 +-
include/configs/mx7_common.h | 1 +
include/configs/p1_p2_rdb_pc.h | 1 -
include/configs/p1_twr.h | 1 -
include/configs/usbarmory.h | 2 +-
include/configs/vf610twr.h | 2 +-
include/configs/woodburn_common.h | 2 +-
include/fm_eth.h | 17 +
include/fsl_csu.h | 34 ++
include/fsl_ddr_sdram.h | 2 +
{arch/powerpc/include/asm => include}/fsl_dtsec.h | 0
include/fsl_esdhc.h | 2 +-
{arch/powerpc/include/asm => include}/fsl_fman.h | 0
include/fsl_sec.h | 6 +-
{arch/powerpc/include/asm => include}/fsl_tgec.h | 0
include/fsl_validate.h | 14 +-
187 files changed, 4390 insertions(+), 1091 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/Makefile
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/README.lsch2
rename arch/arm/cpu/armv8/{fsl-lsch3/README => fsl-layerscape/README.lsch3} (99%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/cpu.c (59%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/cpu.h (71%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/fdt.c (90%)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/fsl_lsch3_serdes.c (95%)
rename arch/arm/cpu/armv8/{fsl-lsch3/speed.c =>
fsl-layerscape/fsl_lsch3_speed.c} (93%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/lowlevel.S (97%)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1043a_serdes.c
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/ls2085a_serdes.c (97%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/mp.c (83%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/soc.c (72%)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/spl.c
delete mode 100644 arch/arm/cpu/armv8/fsl-lsch3/Makefile
delete mode 100644 arch/arm/cpu/armv8/fsl-lsch3/speed.h
rename arch/arm/include/asm/{arch-fsl-lsch3 => arch-fsl-layerscape}/clock.h (56%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/config.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/cpu.h
rename arch/arm/include/asm/{arch-fsl-lsch3 => arch-fsl-layerscape}/fdt.h (71%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
rename arch/arm/include/asm/{arch-fsl-lsch3 =>
arch-fsl-layerscape}/immap_lsch3.h (58%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h
rename arch/arm/include/asm/{arch-fsl-lsch3 =>
arch-fsl-layerscape}/ls2085a_stream_id.h (100%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/mmu.h
rename arch/arm/{cpu/armv8/fsl-lsch3 => include/asm/arch-fsl-layerscape}/mp.h (82%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/soc.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/speed.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/config.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/gpio.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/soc.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
delete mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
create mode 100644 board/freescale/ls1043ardb/Kconfig
create mode 100644 board/freescale/ls1043ardb/MAINTAINERS
create mode 100644 board/freescale/ls1043ardb/Makefile
create mode 100644 board/freescale/ls1043ardb/README
create mode 100644 board/freescale/ls1043ardb/cpld.c
create mode 100644 board/freescale/ls1043ardb/cpld.h
create mode 100644 board/freescale/ls1043ardb/ddr.c
create mode 100644 board/freescale/ls1043ardb/ddr.h
create mode 100644 board/freescale/ls1043ardb/eth.c
create mode 100644 board/freescale/ls1043ardb/ls1043ardb.c
create mode 100644 board/freescale/ls1043ardb/ls1043ardb_pbi.cfg
create mode 100644 board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg
create mode 100644 board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
rename configs/{ls1021atwr_sdcard_defconfig => ls1021atwr_sdcard_ifc_defconfig}
(82%)
create mode 100644 configs/ls1021atwr_sdcard_qspi_defconfig
create mode 100644 configs/ls1043ardb_defconfig
create mode 100644 configs/ls1043ardb_nand_defconfig
create mode 100644 configs/ls1043ardb_sdcard_defconfig
create mode 100644 doc/README.fsl-clk
create mode 100644 drivers/net/fm/ls1043.c
create mode 100644 include/configs/ls1043a_common.h
create mode 100644 include/configs/ls1043ardb.h
create mode 100644 include/fsl_csu.h
rename {arch/powerpc/include/asm => include}/fsl_dtsec.h (100%)
rename {arch/powerpc/include/asm => include}/fsl_fman.h (100%)
rename {arch/powerpc/include/asm => include}/fsl_tgec.h (100%)
Thanks.
York
next reply other threads:[~2015-10-30 16:26 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-30 16:26 York Sun [this message]
2015-10-30 19:54 ` [U-Boot] Please pull u-boot-fsl-qoriq master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-05-24 5:07 Prabhakar Kushwaha
2019-05-26 10:48 ` Tom Rini
2019-05-22 12:31 Prabhakar Kushwaha
2019-05-22 16:58 ` Tom Rini
2019-03-15 12:54 Prabhakar Kushwaha
2019-03-17 19:30 ` Tom Rini
2019-03-04 8:57 Prabhakar Kushwaha
2019-03-05 2:47 ` Tom Rini
2019-02-20 7:31 Prabhakar Kushwaha
2019-02-21 23:09 ` Tom Rini
2019-01-18 18:09 York Sun
2019-01-19 14:02 ` Tom Rini
2018-09-28 15:04 York Sun
2018-09-30 2:27 ` Tom Rini
2018-08-23 19:01 York Sun
2018-08-24 2:45 ` Tom Rini
2018-08-13 16:19 York Sun
2018-08-13 23:55 ` Tom Rini
2018-06-12 17:24 York Sun
2018-06-12 22:33 ` Tom Rini
2018-06-08 23:49 York Sun
2018-06-09 4:39 ` Tom Rini
2018-06-09 4:46 ` York Sun
2018-06-11 12:25 ` Tom Rini
2018-06-09 4:57 ` York Sun
2018-06-11 12:29 ` Tom Rini
2018-06-11 16:33 ` York Sun
2018-05-11 4:20 York Sun
2018-05-11 15:45 ` Tom Rini
2018-03-20 22:07 York Sun
2018-03-21 1:56 ` Tom Rini
2018-02-12 17:06 York Sun
2018-02-12 22:32 ` Tom Rini
2018-01-31 23:04 York Sun
2018-02-01 13:08 ` Tom Rini
2018-01-24 2:00 York Sun
2018-01-24 16:28 ` Tom Rini
2018-01-17 18:33 York Sun
2018-01-18 13:45 ` Tom Rini
2018-01-11 4:57 York Sun
2018-01-11 18:42 ` Tom Rini
2018-01-05 1:19 York Sun
2018-01-05 16:00 ` York Sun
2017-12-18 16:26 York Sun
2017-12-19 1:56 ` Tom Rini
2017-12-07 22:43 York Sun
2017-12-08 2:49 ` Tom Rini
2017-12-08 14:31 ` Tom Rini
2017-10-27 21:29 York Sun
2017-10-29 11:58 ` Tom Rini
2017-10-12 14:51 York Sun
2017-10-12 22:29 ` Tom Rini
2017-09-23 5:08 York Sun
2017-09-24 14:40 ` Tom Rini
2017-09-12 15:59 York Sun
2017-09-12 21:13 ` Tom Rini
2017-08-10 15:34 York Sun
2017-08-11 2:19 ` Tom Rini
2017-08-11 2:35 ` York Sun
2017-08-11 11:13 ` Tom Rini
2017-08-11 14:35 ` Tom Rini
2017-08-11 14:47 ` York Sun
2017-08-11 14:51 ` Tom Rini
2017-08-01 22:56 York Sun
2017-08-01 23:34 ` Bin Meng
2017-08-03 19:07 ` Tom Rini
2017-06-02 17:46 york sun
2017-06-04 17:11 ` Tom Rini
2017-04-25 15:44 York Sun
2017-04-26 19:16 ` Tom Rini
2017-04-18 15:32 York Sun
2017-04-19 13:02 ` Tom Rini
2017-03-28 18:02 york sun
2017-04-04 19:59 ` Tom Rini
2017-03-14 19:31 york sun
2017-03-09 21:33 york sun
2017-03-10 15:23 ` Tom Rini
2017-03-10 16:46 ` york sun
2017-03-10 21:07 ` Tom Rini
2017-03-10 21:21 ` york sun
2017-03-10 21:42 ` Tom Rini
2017-02-03 22:35 york sun
2017-02-05 16:25 ` Tom Rini
2017-01-19 17:20 york sun
2017-01-20 13:50 ` Tom Rini
2016-12-16 17:43 york sun
2016-12-17 3:18 ` Tom Rini
2016-12-05 19:39 york sun
2016-12-06 0:37 ` Tom Rini
2016-11-23 19:13 york sun
2016-11-29 15:55 ` Tom Rini
2016-11-23 1:06 york sun
2016-11-23 12:22 ` Tom Rini
2016-11-23 16:53 ` york sun
2016-09-20 18:09 york sun
2016-09-20 19:31 ` Tom Rini
2016-09-20 19:55 ` york sun
[not found] ` <0ca4216b-c5ed-b18b-6f75-74c136269d5e@nxp.com>
2016-09-20 20:23 ` york sun
2016-08-02 23:42 york sun
2016-08-03 12:19 ` Tom Rini
2016-07-26 20:28 york sun
2016-07-27 0:58 ` Tom Rini
2016-07-19 20:29 york sun
2016-07-20 2:22 ` Tom Rini
2016-06-10 22:18 York Sun
2016-06-19 14:03 ` Tom Rini
2016-05-24 17:28 York Sun
2016-05-24 23:18 ` Tom Rini
2016-04-06 17:35 York Sun
2016-04-08 19:44 ` Tom Rini
2016-03-29 16:06 York Sun
2016-03-29 22:06 ` Tom Rini
2016-03-22 15:52 york sun
2016-03-23 1:58 ` Tom Rini
2016-02-24 17:02 york sun
2016-02-25 15:22 ` Tom Rini
2016-02-02 2:41 york sun
2016-02-02 15:49 ` Tom Rini
2015-12-17 6:42 York Sun
2015-12-18 0:28 ` Tom Rini
2015-12-15 1:16 York Sun
2015-12-15 23:29 ` Tom Rini
2015-12-16 1:40 ` York Sun
2015-12-16 1:48 ` York Sun
2015-12-16 1:59 ` Tom Rini
2015-12-16 2:01 ` York Sun
2015-12-16 2:14 ` York Sun
2015-11-30 19:32 York Sun
2015-12-01 1:37 ` Tom Rini
2015-09-02 3:00 York Sun
2015-09-02 21:58 ` Tom Rini
2015-08-04 16:08 York Sun
2015-08-04 17:50 ` Tom Rini
2015-07-20 21:07 York Sun
2015-07-21 13:50 ` Tom Rini
2015-05-22 20:55 York Sun
2015-05-23 12:42 ` Tom Rini
2015-04-24 2:17 York Sun
2015-04-28 14:50 ` Tom Rini
2015-02-25 21:29 York Sun
2015-02-26 2:58 ` Tom Rini
2015-01-24 15:44 York Sun
2015-01-27 11:50 ` Tom Rini
2014-10-20 21:29 York Sun
2014-10-21 19:55 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56339A4A.9040606@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.