All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laszlo Ersek <lersek@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
	Jordan Justen <jordan.l.justen@intel.com>,
	Kevin O'Connor <kevin@koconnor.net>,
	Gerd Hoffmann <kraxel@redhat.com>,
	Michael Kinney <michael.d.kinney@intel.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [Qemu-devel] [PATCH] hw/isa/lpc_ich9: inject SMI on all VCPUs if APM_STS == 'Q'
Date: Tue, 3 Nov 2015 19:23:01 +0100	[thread overview]
Message-ID: <5638FB85.8070801@redhat.com> (raw)
In-Reply-To: <1445616339-28414-1-git-send-email-lersek@redhat.com>

On 10/23/15 18:05, Laszlo Ersek wrote:
> The generic edk2 SMM infrastructure prefers
> EFI_SMM_CONTROL2_PROTOCOL.Trigger() to inject an SMI on each processor. If
> Trigger() only brings the current processor into SMM, then edk2 handles it
> in the following ways:
> 
> (1) If Trigger() is executed by the BSP (which is guaranteed before
>     ExitBootServices(), but is not necessarily true at runtime), then:
> 
>     (a) If edk2 has been configured for "traditional" SMM synchronization,
>         then the BSP sends directed SMIs to the APs with APIC delivery,
>         bringing them into SMM individually. Then the BSP runs the SMI
>         handler / dispatcher.
> 
>     (b) If edk2 has been configured for "relaxed" SMM synchronization,
>         then the APs that are not already in SMM are not brought in, and
>         the BSP runs the SMI handler / dispatcher.
> 
> (2) If Trigger() is executed by an AP (which is possible after
>     ExitBootServices(), and can be forced e.g. by "taskset -c 1
>     efibootmgr"), then the AP in question brings in the BSP with a
>     directed SMI, and the BSP runs the SMI handler / dispatcher.
> 
> The problem with (1a) and (2) is that the BSP and AP synchronization is
> slow. The above taskset + efibootmgr command takes more than 30 seconds to
> complete on TCG, for example, because efibootmgr accesses non-volatile
> UEFI variables intensively.
> 
> Therefore introduce a special APM_STS value (0x51) that causes QEMU to
> inject the SMI on all VCPUs. OVMF's EFI_SMM_CONTROL2_PROTOCOL.Trigger()
> can utilize this to accommodate edk2's preference about "broadcast" SMI.
> 
> SeaBIOS uses values 0x00 and 0x01 for APM_STS (called PORT_SMI_STATUS in
> the SeaBIOS code), so this change should be transparent to it.
> 
> While commit 3c23402d4032 targeted correctness, this one aims at better
> performance only.
> 
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Michael Kinney <michael.d.kinney@intel.com>
> Cc: "Kevin O'Connor" <kevin@koconnor.net>
> Cc: "Michael S. Tsirkin" <mst@redhat.com>
> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
> ---
>  hw/isa/lpc_ich9.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c
> index 1ffc803..117baff 100644
> --- a/hw/isa/lpc_ich9.c
> +++ b/hw/isa/lpc_ich9.c
> @@ -380,6 +380,8 @@ void ich9_lpc_pm_init(PCIDevice *lpc_pci, bool smm_enabled, bool enable_tco)
>  
>  /* APM */
>  
> +#define QEMU_ICH9_APM_STS_BROADCAST_SMI 'Q'
> +
>  static void ich9_apm_ctrl_changed(uint32_t val, void *arg)
>  {
>      ICH9LPCState *lpc = arg;
> @@ -394,7 +396,15 @@ static void ich9_apm_ctrl_changed(uint32_t val, void *arg)
>  
>      /* SMI_EN = PMBASE + 30. SMI control and enable register */
>      if (lpc->pm.smi_en & ICH9_PMIO_SMI_EN_APMC_EN) {
> -        cpu_interrupt(current_cpu, CPU_INTERRUPT_SMI);
> +        if (lpc->apm.apms == QEMU_ICH9_APM_STS_BROADCAST_SMI) {
> +            CPUState *cs;
> +
> +            CPU_FOREACH(cs) {
> +                cpu_interrupt(cs, CPU_INTERRUPT_SMI);
> +            }
> +        } else {
> +            cpu_interrupt(current_cpu, CPU_INTERRUPT_SMI);
> +        }
>      }
>  }
>  
> 

I'm withdrawing this patch for now.

Thanks
Laszlo

      parent reply	other threads:[~2015-11-03 18:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-23 16:05 [Qemu-devel] [PATCH] hw/isa/lpc_ich9: inject SMI on all VCPUs if APM_STS == 'Q' Laszlo Ersek
2015-11-02 12:26 ` Laszlo Ersek
2015-11-03 18:23 ` Laszlo Ersek [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5638FB85.8070801@redhat.com \
    --to=lersek@redhat.com \
    --cc=jordan.l.justen@intel.com \
    --cc=kevin@koconnor.net \
    --cc=kraxel@redhat.com \
    --cc=michael.d.kinney@intel.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.