Re: Adding a new machine to meta-fsl-arm-extra

[Christian Ege <k4230r6@gmail.com>]

Hello Otavio,

On 05.11.2015 18:19, Otavio Salvador wrote:
> Hello Christian,
> 
> On Thu, Nov 5, 2015 at 11:02 AM, Christian Ege <k4230r6@gmail.com> wrote:
>> I am preparing Patches for the UDOO Neo (http://www.udoo.org/udoo-neo/)
>> i.mx6 SoloX based board to be integrated into meta-fsl-arm-extra. I have
>> some questions what is the intended work flow for this.
>>
>> At the moment I have integrated the UDOO Neo board in my fork of
>> meta-fsl-arm-extra.
>>
>> https://github.com/graugans/meta-fsl-arm-extra/tree/fido
>>
>> - Is it okay to provide patches for fido at first or should new boards
>> be introduced to master only?
> 
> master only.
Makes sense
> 
>> - How to deal with the various flavours of the Neo Familiy?
>>     - BASIC with 512MB RAM, Ethernet
>>     - EXTENDED 1GB RAM, Wi-Fi/Bluetooth, Motion Sensors
>>     - FULL 1GB RAM, Wi-Fi/Bluetooth, Motion Sensors, Ethernet
> 
> It depends; ideally UDOO ought to work with SPL and same image should
> work fine with all the flavours. Wandboard does it, CuBox does it as
> well.
Okay, at the moment SPL is not supported. But this is an good idea.

> ...
>> I Have patches available for the UDOO Quad as-well but no board to test
>> on. If there is interest I can provide them as-well
> ...
> 
> I prefer you to not send it than; we should have only maintained boards.
This is what I've expected.

Regards,
Christian