From: poma <pomidorabelisima-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: "nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org"
<nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>
Subject: Re: NOUVEAU(0): DRI3 on EXA enabled
Date: Thu, 5 Nov 2015 23:47:18 +0100 [thread overview]
Message-ID: <563BDC76.5010504@gmail.com> (raw)
In-Reply-To: <5639EB9F.5060900-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On 04.11.2015 12:27, poma wrote:
> On 04.11.2015 11:57, Martin Peres wrote:
>> On 02/11/15 08:28, poma wrote:
>>> An interesting results.
>>>
>>> DRI2:
>>>
>>> $ vblank_mode=0 glxgears
>>> ATTENTION: default value of option vblank_mode overridden by environment.
>>> 6321 frames in 5.0 seconds = 1264.103 FPS
>>> 6380 frames in 5.0 seconds = 1275.943 FPS
>>> 6369 frames in 5.0 seconds = 1273.629 FPS
>>> 6377 frames in 5.0 seconds = 1275.322 FPS
>>> 6387 frames in 5.0 seconds = 1277.330 FPS
>>> 6407 frames in 5.0 seconds = 1281.337 FPS
>>> 6381 frames in 5.0 seconds = 1276.053 FPS
>>> 6410 frames in 5.0 seconds = 1281.855 FPS
>>> 6405 frames in 5.0 seconds = 1280.905 FPS
>>> 6378 frames in 5.0 seconds = 1275.599 FPS
>>> ^C
>>>
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>
>>> DRI3:
>>>
>>> $ cat /etc/X11/xorg.conf.d/nouveau-dri3.conf
>>> Section "Device"
>>> Identifier "Videocard0"
>>> Driver "nouveau"
>>> Option "DRI" "3"
>>> EndSection
>>>
>>> $ grep DRI3 /var/log/Xorg.0.log
>>> [ 4367.417] (II) NOUVEAU(0): DRI3 on EXA enabled
>>
>> For the record, the only acceptable way of checking for DRI3 is to run
>> the program with LIBGL_DEBUG=verbose. Any other solution is wrong.
>>
>
>
> - DRI2:
>
> [ 3210.736] (II) Loading sub module "dri2"
> [ 3210.736] (II) LoadModule: "dri2"
> [ 3210.736] (II) Module "dri2" already built-in
> [ 3210.736] (==) NOUVEAU(0): Allowed maximum DRI level 2.
> [ 3210.877] (II) NOUVEAU(0): [DRI2] Setup complete
> [ 3210.894] (II) GLX: Initialized DRI2 GL provider for screen 0
>
>
> $ LIBGL_DEBUG=verbose vblank_mode=0 glxgears
> libGL: OpenDriver: trying /usr/lib64/dri/tls/nouveau_dri.so
> libGL: OpenDriver: trying /usr/lib64/dri/nouveau_dri.so
> ATTENTION: default value of option vblank_mode overridden by environment.
> libGL: Using DRI2 for screen 0
> 6231 frames in 5.0 seconds = 1246.081 FPS
> 6387 frames in 5.0 seconds = 1277.312 FPS
> 6421 frames in 5.0 seconds = 1284.023 FPS
> 6375 frames in 5.0 seconds = 1274.905 FPS
> 6399 frames in 5.0 seconds = 1279.609 FPS
> 6440 frames in 5.0 seconds = 1287.837 FPS
> 6371 frames in 5.0 seconds = 1274.142 FPS
> 6397 frames in 5.0 seconds = 1279.245 FPS
> 6429 frames in 5.0 seconds = 1285.668 FPS
> 6371 frames in 5.0 seconds = 1274.177 FPS
> ^C
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> - DRI3:
>
> [ 3750.992] (II) Loading sub module "dri2"
> [ 3750.992] (II) LoadModule: "dri2"
> [ 3750.992] (II) Module "dri2" already built-in
> [ 3750.992] (**) NOUVEAU(0): Option "DRI" "3"
> [ 3750.992] (**) NOUVEAU(0): Allowed maximum DRI level 3.
> [ 3751.128] (II) NOUVEAU(0): [DRI2] Setup complete
> [ 3751.128] (II) NOUVEAU(0): DRI3 on EXA enabled
> [ 3751.145] (II) GLX: Initialized DRI2 GL provider for screen 0
>
>
> $ LIBGL_DEBUG=verbose vblank_mode=0 glxgears
> libGL: pci id for fd 4: 10de:06e4, driver nouveau
> libGL: OpenDriver: trying /usr/lib64/dri/tls/nouveau_dri.so
> libGL: OpenDriver: trying /usr/lib64/dri/nouveau_dri.so
> ATTENTION: default value of option vblank_mode overridden by environment.
> libGL: Using DRI3 for screen 0
> 7261 frames in 5.0 seconds = 1452.136 FPS
> 7353 frames in 5.0 seconds = 1470.404 FPS
> 7354 frames in 5.0 seconds = 1470.652 FPS
> 7385 frames in 5.0 seconds = 1476.916 FPS
> 7337 frames in 5.0 seconds = 1467.380 FPS
> 7344 frames in 5.0 seconds = 1468.661 FPS
> 7360 frames in 5.0 seconds = 1471.951 FPS
> 7327 frames in 5.0 seconds = 1465.211 FPS
> 7345 frames in 5.0 seconds = 1468.992 FPS
> 7371 frames in 5.0 seconds = 1474.112 FPS
> ^C
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> $ xfwm4 --version
> This is xfwm4 version 4.12.3git.20150825 (revision 20150825) for Xfce 4.12
> Released under the terms of the GNU General Public License.
> Compiled against GTK+-2.24.28, using GTK+-2.24.28.
>
> Build configuration and supported features:
> - Startup notification support: Yes
> - XSync support: Yes
> - Render support: Yes
> - Xrandr support: Yes
> - Xpresent support: Yes
> - Embedded compositor: Yes
> - Epoxy support: No
>
>
> $ xfconf-query --channel xfwm4 --property /general/use_compositing
> true
>
>
> SW:
> xorg-x11-drv-nouveau-1.0.12-0.3.fc22.x86_64
> xorg-x11-server-Xorg-1.17.3-1.fc22.x86_64
> mesa-dri-drivers-10.6.9-1.20151008.fc22.x86_64
> libdrm-2.4.61-3.fc22.x86_64
> libXpresent-1.0.0-1.fc22.x86_64
> xfwm4-4.12.3-15.1.xpresent.nv34.git20150825.fc22.x86_64
>
>
NV34 / i686
- DRI2:
/var/log/Xorg.0.log
[ 438.397] (II) Loading sub module "dri2"
[ 438.397] (II) LoadModule: "dri2"
[ 438.397] (II) Module "dri2" already built-in
[ 438.397] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 438.606] (II) NOUVEAU(0): [DRI2] Setup complete
[ 438.606] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
$ LIBGL_DEBUG=verbose vblank_mode=0 glxgears
libGL: OpenDriver: trying /usr/lib/dri/tls/nouveau_dri.so
libGL: OpenDriver: trying /usr/lib/dri/nouveau_dri.so
ATTENTION: default value of option vblank_mode overridden by environment.
libGL: Using DRI2 for screen 0
858 frames in 5.0 seconds = 171.598 FPS
929 frames in 5.0 seconds = 185.706 FPS
935 frames in 5.0 seconds = 186.948 FPS
988 frames in 5.0 seconds = 197.338 FPS
961 frames in 5.0 seconds = 192.055 FPS
1052 frames in 5.0 seconds = 209.084 FPS
955 frames in 5.0 seconds = 190.737 FPS
1006 frames in 5.0 seconds = 201.106 FPS
912 frames in 5.0 seconds = 182.353 FPS
926 frames in 5.0 seconds = 185.176 FPS
^C
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- DRI3:
$ cat /etc/X11/xorg.conf.d/nouveau-dri3.conf
Section "Device"
Identifier "Videocard0"
Driver "nouveau"
Option "DRI" "3"
EndSection
/var/log/Xorg.0.log
[ 1045.613] (II) Loading sub module "dri2"
[ 1045.613] (II) LoadModule: "dri2"
[ 1045.613] (II) Module "dri2" already built-in
[ 1045.613] (**) NOUVEAU(0): Option "DRI" "3"
[ 1045.613] (**) NOUVEAU(0): Allowed maximum DRI level 3.
[ 1045.739] (II) NOUVEAU(0): [DRI2] Setup complete
[ 1045.739] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 1045.739] (II) NOUVEAU(0): DRI3 on EXA enabled
$ LIBGL_DEBUG=verbose vblank_mode=0 glxgears
libGL: pci id for fd 4: 10de:0322, driver nouveau
libGL: OpenDriver: trying /usr/lib/dri/tls/nouveau_dri.so
libGL: OpenDriver: trying /usr/lib/dri/nouveau_dri.so
ATTENTION: default value of option vblank_mode overridden by environment.
libGL: Using DRI3 for screen 0
1308 frames in 5.0 seconds = 261.500 FPS
1323 frames in 5.0 seconds = 264.532 FPS
1302 frames in 5.0 seconds = 260.171 FPS
1315 frames in 5.0 seconds = 262.957 FPS
1244 frames in 5.0 seconds = 248.704 FPS
1092 frames in 5.0 seconds = 218.283 FPS
1016 frames in 5.0 seconds = 202.803 FPS
1051 frames in 5.0 seconds = 210.104 FPS
1055 frames in 5.0 seconds = 210.974 FPS
1041 frames in 5.0 seconds = 208.108 FPS
1052 frames in 5.0 seconds = 210.313 FPS
1058 frames in 5.0 seconds = 211.247 FPS
^C
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
next prev parent reply other threads:[~2015-11-05 22:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-02 6:28 NOUVEAU(0): DRI3 on EXA enabled poma
[not found] ` <56370290.6090009-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-04 10:57 ` Martin Peres
[not found] ` <5639E492.1010509-GANU6spQydw@public.gmane.org>
2015-11-04 11:27 ` poma
[not found] ` <5639EB9F.5060900-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-05 10:17 ` poma
2015-11-05 22:47 ` poma [this message]
[not found] ` <563BDC76.5010504-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-06 13:28 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=563BDC76.5010504@gmail.com \
--to=pomidorabelisima-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.