All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anugraha Sinha <asinha.mailinglist@gmail.com>
To: Peter Chubb <peter.chubb@nicta.com.au>, linux-raid@vger.kernel.org
Subject: Re: RAID6 reshape stalls immediately
Date: Fri, 6 Nov 2015 22:48:49 +0900	[thread overview]
Message-ID: <563CAFC1.2080708@gmail.com> (raw)
In-Reply-To: <84a8qtgwqk.wl-peter.chubb@nicta.com.au>

Dear Peter,

What happening on the root partition where you are trying to take a backup?

Any I/O, filesize etc?

Also could you share the output of mdadm --examine <all of your 6 raid 
members individually?

On 11/5/2015 8:39 AM, Peter Chubb wrote:
> Hi Folks,
>     I added two disks to my RAID5 array then attempted to reshape it to
>     RAID 6.  And it has been sitting on 0% complete, with no disk I/O
>     for 24 hours now.
>
>     Is there any way to kick the reshape process?
>
> /proc/mdstat is:
>
>    Personalities : [raid6] [raid5] [raid4]
>    md0 : active raid6 sdi1[6] sdh1[5] sdd1[4] sde1[2] sdb1[1] sda1[0]
>        5860122624 blocks super 1.2 level 6, 512k chunk, algorithm 18 [6/5] [UUUU_U]
>        [>....................]  reshape =  0.0% (0/1953374208) finish=1308.7min speed=24099K/sec
>        bitmap: 0/15 pages [0KB], 65536KB chunk
>
>    unused devices: <none>
>
>
> What I did:
>    mdadm --add /dev/md0 /dev/sdh1
>    mdadm --add /dev/md0 /dev/sdi1
>    mdadm --grow /dev/md0 --level=6 --raid-devices=6 --backup-file=/root/raid5-backup
>
> dmesg reported:
> [691739.298345] md: bind<sdh1>
> [691739.364534] RAID conf printout:
> [691739.364537]  --- level:5 rd:4 wd:4
> [691739.364539]  disk 0, o:1, dev:sda1
> [691739.364540]  disk 1, o:1, dev:sdb1
> [691739.364541]  disk 2, o:1, dev:sde1
> [691739.364542]  disk 3, o:1, dev:sdd1
> [691741.832242] md: bind<sdi1>
> [691741.898470] RAID conf printout:
> [691741.898474]  --- level:5 rd:4 wd:4
> [691741.898476]  disk 0, o:1, dev:sda1
> [691741.898478]  disk 1, o:1, dev:sdb1
> [691741.898480]  disk 2, o:1, dev:sde1
> [691741.898481]  disk 3, o:1, dev:sdd1
> [691741.898482] RAID conf printout:
> [691741.898482]  --- level:5 rd:4 wd:4
> [691741.898484]  disk 0, o:1, dev:sda1
> [691741.898485]  disk 1, o:1, dev:sdb1
> [691741.898486]  disk 2, o:1, dev:sde1
> [691741.898487]  disk 3, o:1, dev:sdd1
> [691805.469105] md/raid:md0: device sdd1 operational as raid disk 3
> [691805.469110] md/raid:md0: device sde1 operational as raid disk 2
> [691805.469111] md/raid:md0: device sdb1 operational as raid disk 1
> [691805.469112] md/raid:md0: device sda1 operational as raid disk 0
> [691805.469551] md/raid:md0: allocated 5424kB
> [691805.506035] md/raid:md0: raid level 6 active with 4 out of 5 devices, algori
> thm 18
> [691805.506050] RAID conf printout:
> [691805.506051]  --- level:6 rd:5 wd:4
> [691805.506053]  disk 0, o:1, dev:sda1
> [691805.506054]  disk 1, o:1, dev:sdb1
> [691805.506055]  disk 2, o:1, dev:sde1
> [691805.506056]  disk 3, o:1, dev:sdd1
> [691805.847329] RAID conf printout:
> [691805.847333]  --- level:6 rd:6 wd:5
> [691805.847335]  disk 0, o:1, dev:sda1
> [691805.847336]  disk 1, o:1, dev:sdb1
> [691805.847337]  disk 2, o:1, dev:sde1
> [691805.847338]  disk 3, o:1, dev:sdd1
> [691805.847340]  disk 4, o:1, dev:sdi1
> [691805.847350] RAID conf printout:
> [691805.847350]  --- level:6 rd:6 wd:5
> [691805.847351]  disk 0, o:1, dev:sda1
> [691805.847352]  disk 1, o:1, dev:sdb1
> [691805.847353]  disk 2, o:1, dev:sde1
> [691805.847354]  disk 3, o:1, dev:sdd1
> [691805.847354]  disk 4, o:1, dev:sdi1
> [691805.847355]  disk 5, o:1, dev:sdh1
> [691805.847424] md: reshape of RAID array md0
> [691805.847426] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
> [691805.847428] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reshape.
> [691805.847439] md: using 128k window, over a total of 1953374208k.
>
> And nothing since.
>

  reply	other threads:[~2015-11-06 13:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-04 23:39 RAID6 reshape stalls immediately Peter Chubb
2015-11-06 13:48 ` Anugraha Sinha [this message]
2015-11-06 13:54   ` Anugraha Sinha
2015-11-08  4:18   ` Peter Chubb
2015-11-09 13:27     ` Anugraha Sinha
2015-11-09 13:38       ` Phil Turmel
2015-11-09 22:02         ` Peter Chubb
2015-11-09 22:26           ` Phil Turmel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=563CAFC1.2080708@gmail.com \
    --to=asinha.mailinglist@gmail.com \
    --cc=linux-raid@vger.kernel.org \
    --cc=peter.chubb@nicta.com.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.