All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	"David S. Miller" <davem@davemloft.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>, Guenter Roeck <linux@roeck-us.net>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Subject: [PATCH 5/6] net: dsa: mv88e6060: add register defines header file
Date: Tue, 10 Nov 2015 14:25:30 +0100	[thread overview]
Message-ID: <5641F04A.9060303@baylibre.com> (raw)

To align with the mv88e6xxx code, add a similar header file
with all the register defines.
The file is based on the mv88e6xxx header for coherency.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/net/dsa/mv88e6060.h | 108 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)
 create mode 100644 drivers/net/dsa/mv88e6060.h

diff --git a/drivers/net/dsa/mv88e6060.h b/drivers/net/dsa/mv88e6060.h
new file mode 100644
index 0000000..adbc894
--- /dev/null
+++ b/drivers/net/dsa/mv88e6060.h
@@ -0,0 +1,108 @@
+/*
+ * net/dsa/mv88e6060.h - Marvell 88e6060 switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MV88E6060_H
+#define __MV88E6060_H
+
+#define MV88E6060_PORTS	6
+
+#define REG_PORT(p)		(0x8 + (p))
+#define PORT_STATUS		0x00
+#define PORT_STATUS_PAUSE_EN	BIT(15)
+#define PORT_STATUS_MY_PAUSE	BIT(14)
+#define PORT_STATUS_FC		(PORT_STATUS_MY_PAUSE | PORT_STATUS_PAUSE_EN)
+#define PORT_STATUS_RESOLVED	BIT(13)
+#define PORT_STATUS_LINK	BIT(12)
+#define PORT_STATUS_PORTMODE	BIT(11)
+#define PORT_STATUS_PHYMODE	BIT(10)
+#define PORT_STATUS_DUPLEX	BIT(9)
+#define PORT_STATUS_SPEED	BIT(8)
+#define PORT_SWITCH_ID		0x03
+#define PORT_SWITCH_ID_6060	0x0600
+#define PORT_SWITCH_ID_6060_MASK	0xfff0
+#define PORT_SWITCH_ID_6060_R1	0x0601
+#define PORT_SWITCH_ID_6060_R2	0x0602
+#define PORT_CONTROL		0x04
+#define PORT_CONTROL_FORCE_FLOW_CTRL	BIT(15)
+#define PORT_CONTROL_TRAILER	BIT(14)
+#define PORT_CONTROL_HEADER	BIT(11)
+#define PORT_CONTROL_INGRESS_MODE	BIT(8)
+#define PORT_CONTROL_VLAN_TUNNEL	BIT(7)
+#define PORT_CONTROL_STATE_MASK	0x03
+#define PORT_CONTROL_STATE_DISABLED	0x00
+#define PORT_CONTROL_STATE_BLOCKING	0x01
+#define PORT_CONTROL_STATE_LEARNING	0x02
+#define PORT_CONTROL_STATE_FORWARDING	0x03
+#define PORT_VLAN_MAP		0x06
+#define PORT_VLAN_MAP_DBNUM_SHIFT	12
+#define PORT_VLAN_MAP_TABLE_MASK	0x1f
+#define PORT_ASSOC_VECTOR	0x0b
+#define PORT_ASSOC_VECTOR_MONITOR	BIT(15)
+#define PORT_ASSOC_VECTOR_PAV_MASK	0x1f
+#define PORT_RX_CNTR		0x10
+#define PORT_TX_CNTR		0x11
+
+#define REG_GLOBAL		0x0f
+#define GLOBAL_STATUS		0x00
+#define GLOBAL_STATUS_SW_MODE_MASK	(0x3 << 12)
+#define GLOBAL_STATUS_SW_MODE_0	(0x0 << 12)
+#define GLOBAL_STATUS_SW_MODE_1	(0x1 << 12)
+#define GLOBAL_STATUS_SW_MODE_2	(0x2 << 12)
+#define GLOBAL_STATUS_SW_MODE_3	(0x3 << 12)
+#define GLOBAL_STATUS_INIT_READY	BIT(11)
+#define GLOBAL_STATUS_ATU_FULL		BIT(3)
+#define GLOBAL_STATUS_ATU_DONE		BIT(2)
+#define GLOBAL_STATUS_PHY_INT	BIT(1)
+#define GLOBAL_STATUS_EEINT	BIT(0)
+#define GLOBAL_MAC_01		0x01
+#define GLOBAL_MAC_01_DIFF_ADDR	BIT(8)
+#define GLOBAL_MAC_23		0x02
+#define GLOBAL_MAC_45		0x03
+#define GLOBAL_CONTROL		0x04
+#define GLOBAL_CONTROL_DISCARD_EXCESS	BIT(13)
+#define GLOBAL_CONTROL_MAX_FRAME_1536	BIT(10)
+#define GLOBAL_CONTROL_RELOAD_EEPROM	BIT(9)
+#define GLOBAL_CONTROL_CTRMODE		BIT(8)
+#define GLOBAL_CONTROL_ATU_FULL_EN	BIT(3)
+#define GLOBAL_CONTROL_ATU_DONE_EN	BIT(2)
+#define GLOBAL_CONTROL_PHYINT_EN	BIT(1)
+#define GLOBAL_CONTROL_EEPROM_DONE_EN	BIT(0)
+#define GLOBAL_ATU_CONTROL	0x0a
+#define GLOBAL_ATU_CONTROL_SWRESET	BIT(15)
+#define GLOBAL_ATU_CONTROL_LEARNDIS	BIT(14)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_256	(0x0 << 12)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_512	(0x1 << 12)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_1024	(0x2 << 12)
+#define GLOBAL_ATU_CONTROL_ATE_AGE_SHIFT	4
+#define GLOBAL_ATU_CONTROL_ATE_AGE_MASK	(0xff << 4)
+#define GLOBAL_ATU_CONTROL_ATE_AGE_5MIN	(0x13 << 4)
+#define GLOBAL_ATU_OP		0x0b
+#define GLOBAL_ATU_OP_BUSY	BIT(15)
+#define GLOBAL_ATU_OP_NOP		(0 << 12)
+#define GLOBAL_ATU_OP_FLUSH_ALL	((1 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_UNLOCKED	((2 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_LOAD_DB		((3 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_GET_NEXT_DB	((4 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_DB		((5 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_UNLOCKED_DB ((6 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_DATA		0x0c
+#define GLOBAL_ATU_DATA_PORT_VECTOR_MASK	0x3f0
+#define GLOBAL_ATU_DATA_PORT_VECTOR_SHIFT	4
+#define GLOBAL_ATU_DATA_STATE_MASK		0x0f
+#define GLOBAL_ATU_DATA_STATE_UNUSED		0x00
+#define GLOBAL_ATU_DATA_STATE_UC_STATIC		0x0e
+#define GLOBAL_ATU_DATA_STATE_UC_LOCKED		0x0f
+#define GLOBAL_ATU_DATA_STATE_MC_STATIC		0x07
+#define GLOBAL_ATU_DATA_STATE_MC_LOCKED		0x0e
+#define GLOBAL_ATU_MAC_01	0x0d
+#define GLOBAL_ATU_MAC_23	0x0e
+#define GLOBAL_ATU_MAC_45	0x0f
+
+#endif
-- 
1.9.1

             reply	other threads:[~2015-11-10 13:25 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-10 13:25 Neil Armstrong [this message]
2015-11-10 14:25 ` [PATCH 5/6] net: dsa: mv88e6060: add register defines header file Vivien Didelot
2015-11-10 14:30   ` Andrew Lunn
2015-11-10 14:39     ` Vivien Didelot
2015-11-10 14:42   ` Neil Armstrong
2015-11-10 14:49     ` Vivien Didelot
2015-11-10 14:53     ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5641F04A.9060303@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@savoirfairelinux.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.