All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: mst@redhat.com, kvm@vger.kernel.org,
	virtualization@lists.linux-foundation.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next RFC V3 0/3] basic busy polling support for vhost_net
Date: Thu, 12 Nov 2015 18:20:25 +0800	[thread overview]
Message-ID: <564467E9.9080409@redhat.com> (raw)
In-Reply-To: <1447323395-28052-1-git-send-email-jasowang@redhat.com>



On 11/12/2015 06:16 PM, Jason Wang wrote:
> Hi all:
>
> This series tries to add basic busy polling for vhost net. The idea is
> simple: at the end of tx/rx processing, busy polling for new tx added
> descriptor and rx receive socket for a while. The maximum number of
> time (in us) could be spent on busy polling was specified ioctl.
>
> Test were done through:
>
> - 50 us as busy loop timeout
> - Netperf 2.6
> - Two machines with back to back connected ixgbe
> - Guest with 1 vcpu and 1 queue
>
> Results:
> - For stream workload, ioexits were reduced dramatically in medium
>   size (1024-2048) of tx (at most -39%) and almost all rx (at most
>   -79%) as a result of polling. This compensate for the possible
>   wasted cpu cycles more or less. That porbably why we can still see
>   some increasing in the normalized throughput in some cases.
> - Throughput of tx were increased (at most 105%) expect for the huge
>   write (16384). And we can send more packets in the case (+tpkts were
>   increased).
> - Very minor rx regression in some cases.
> - Improvemnt on TCP_RR (at most 16%).

Forget to mention, the following test results by order are:

1) Guest TX
2) Guest RX
3) TCP_RR

> size/session/+thu%/+normalize%/+tpkts%/+rpkts%/+ioexits%/
>    64/     1/   +9%/  -17%/   +5%/  +10%/   -2%
>    64/     2/   +8%/  -18%/   +6%/  +10%/   -1%
>    64/     4/   +4%/  -21%/   +6%/  +10%/   -1%
>    64/     8/   +9%/  -17%/   +6%/   +9%/   -2%
>   256/     1/  +20%/   -1%/  +15%/  +11%/   -9%
>   256/     2/  +15%/   -6%/  +15%/   +8%/   -8%
>   256/     4/  +17%/   -4%/  +16%/   +8%/   -8%
>   256/     8/  -61%/  -69%/  +16%/  +10%/  -10%
>   512/     1/  +15%/   -3%/  +19%/  +18%/  -11%
>   512/     2/  +19%/    0%/  +19%/  +13%/  -10%
>   512/     4/  +18%/   -2%/  +18%/  +15%/  -10%
>   512/     8/  +17%/   -1%/  +18%/  +15%/  -11%
>  1024/     1/  +25%/   +4%/  +27%/  +16%/  -21%
>  1024/     2/  +28%/   +8%/  +25%/  +15%/  -22%
>  1024/     4/  +25%/   +5%/  +25%/  +14%/  -21%
>  1024/     8/  +27%/   +7%/  +25%/  +16%/  -21%
>  2048/     1/  +32%/  +12%/  +31%/  +22%/  -38%
>  2048/     2/  +33%/  +12%/  +30%/  +23%/  -36%
>  2048/     4/  +31%/  +10%/  +31%/  +24%/  -37%
>  2048/     8/ +105%/  +75%/  +33%/  +23%/  -39%
> 16384/     1/    0%/  -14%/   +2%/    0%/  +19%
> 16384/     2/    0%/  -13%/  +19%/  -13%/  +17%
> 16384/     4/    0%/  -12%/   +3%/    0%/   +2%
> 16384/     8/    0%/  -11%/   -2%/   +1%/   +1%
> size/session/+thu%/+normalize%/+tpkts%/+rpkts%/+ioexits%/
>    64/     1/   -7%/  -23%/   +4%/   +6%/  -74%
>    64/     2/   -2%/  -12%/   +2%/   +2%/  -55%
>    64/     4/   +2%/   -5%/  +10%/   -2%/  -43%
>    64/     8/   -5%/   -5%/  +11%/  -34%/  -59%
>   256/     1/   -6%/  -16%/   +9%/  +11%/  -60%
>   256/     2/   +3%/   -4%/   +6%/   -3%/  -28%
>   256/     4/    0%/   -5%/   -9%/   -9%/  -10%
>   256/     8/   -3%/   -6%/  -12%/   -9%/  -40%
>   512/     1/   -4%/  -17%/  -10%/  +21%/  -34%
>   512/     2/    0%/   -9%/  -14%/   -3%/  -30%
>   512/     4/    0%/   -4%/  -18%/  -12%/   -4%
>   512/     8/   -1%/   -4%/   -1%/   -5%/   +4%
>  1024/     1/    0%/  -16%/  +12%/  +11%/  -10%
>  1024/     2/    0%/  -11%/    0%/   +5%/  -31%
>  1024/     4/    0%/   -4%/   -7%/   +1%/  -22%
>  1024/     8/   -5%/   -6%/  -17%/  -29%/  -79%
>  2048/     1/    0%/  -16%/   +1%/   +9%/  -10%
>  2048/     2/    0%/  -12%/   +7%/   +9%/  -26%
>  2048/     4/    0%/   -7%/   -4%/   +3%/  -64%
>  2048/     8/   -1%/   -5%/   -6%/   +4%/  -20%
> 16384/     1/    0%/  -12%/  +11%/   +7%/  -20%
> 16384/     2/    0%/   -7%/   +1%/   +5%/  -26%
> 16384/     4/    0%/   -5%/  +12%/  +22%/  -23%
> 16384/     8/    0%/   -1%/   -8%/   +5%/   -3%
> size/session/+thu%/+normalize%/+tpkts%/+rpkts%/+ioexits%/
>     1/     1/   +9%/  -29%/   +9%/   +9%/   +9%
>     1/    25/   +6%/  -18%/   +6%/   +6%/   -1%
>     1/    50/   +6%/  -19%/   +5%/   +5%/   -2%
>     1/   100/   +5%/  -19%/   +4%/   +4%/   -3%
>    64/     1/  +10%/  -28%/  +10%/  +10%/  +10%
>    64/    25/   +8%/  -18%/   +7%/   +7%/   -2%
>    64/    50/   +8%/  -17%/   +8%/   +8%/   -1%
>    64/   100/   +8%/  -17%/   +8%/   +8%/   -1%
>   256/     1/  +10%/  -28%/  +10%/  +10%/  +10%
>   256/    25/  +15%/  -13%/  +15%/  +15%/    0%
>   256/    50/  +16%/  -14%/  +18%/  +18%/   +2%
>   256/   100/  +15%/  -13%/  +12%/  +12%/   -2%
>
> Changes from V2:
> - poll also at the end of rx handling
> - factor out the polling logic and optimize the code a little bit
> - add two ioctls to get and set the busy poll timeout
> - test on ixgbe (which can give more stable and reproducable numbers)
>   instead of mlx4.
>
> Changes from V1:
> - Add a comment for vhost_has_work() to explain why it could be
>   lockless
> - Add param description for busyloop_timeout
> - Split out the busy polling logic into a new helper
> - Check and exit the loop when there's a pending signal
> - Disable preemption during busy looping to make sure lock_clock() was
>   correctly used.
>
> Jason Wang (3):
>   vhost: introduce vhost_has_work()
>   vhost: introduce vhost_vq_more_avail()
>   vhost_net: basic polling support
>
>  drivers/vhost/net.c        | 77 +++++++++++++++++++++++++++++++++++++++++++---
>  drivers/vhost/vhost.c      | 48 +++++++++++++++++++++++------
>  drivers/vhost/vhost.h      |  3 ++
>  include/uapi/linux/vhost.h | 11 +++++++
>  4 files changed, 125 insertions(+), 14 deletions(-)
>

  parent reply	other threads:[~2015-11-12 10:20 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-12 10:16 [PATCH net-next RFC V3 0/3] basic busy polling support for vhost_net Jason Wang
2015-11-12 10:16 ` [PATCH net-next RFC V3 1/3] vhost: introduce vhost_has_work() Jason Wang
2015-11-12 10:16 ` Jason Wang
2015-11-12 10:16 ` [PATCH net-next RFC V3 2/3] vhost: introduce vhost_vq_more_avail() Jason Wang
2015-11-12 10:16   ` Jason Wang
2015-11-12 10:16 ` [PATCH net-next RFC V3 3/3] vhost_net: basic polling support Jason Wang
2015-11-12 10:16 ` Jason Wang
2015-11-12 10:20 ` Jason Wang [this message]
2015-11-12 12:02   ` [PATCH net-next RFC V3 0/3] basic busy polling support for vhost_net Felipe Franciosi
2015-11-12 12:02   ` Felipe Franciosi
2015-11-12 12:02     ` Felipe Franciosi
2015-11-13  9:20     ` Jason Wang
2015-11-13  9:20       ` Jason Wang
2015-11-17  6:31       ` Jason Wang
2015-11-17  6:31         ` Jason Wang
  -- strict thread matches above, loose matches on Subject: below --
2015-11-12 10:16 Jason Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=564467E9.9080409@redhat.com \
    --to=jasowang@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.