From: Atom2 <ariel.atom2@web2web.at>
To: Andrew Cooper <andrew.cooper3@citrix.com>,
Jan Beulich <JBeulich@suse.com>
Cc: xen-devel@lists.xen.org
Subject: Re: HVM domains crash after upgrade from XEN 4.5.1 to 4.5.2
Date: Fri, 13 Nov 2015 00:00:59 +0100 [thread overview]
Message-ID: <56451A2B.9090706@web2web.at> (raw)
In-Reply-To: <5644C1CD.3020202@citrix.com>
[-- Attachment #1: Type: text/plain, Size: 3759 bytes --]
Am 12.11.15 um 17:43 schrieb Andrew Cooper:
> On 12/11/15 14:29, Atom2 wrote:
>> Hi Andrew,
>> thanks for your reply. Answers are inline further down.
>>
>> Am 12.11.15 um 14:01 schrieb Andrew Cooper:
>>> On 12/11/15 12:52, Jan Beulich wrote:
>>>>>>> On 12.11.15 at 02:08, <ariel.atom2@web2web.at> wrote:
>>>>> After the upgrade HVM domUs appear to no longer work - regardless
>>>>> of the
>>>>> dom0 kernel (tested with both 3.18.9 and 4.1.7 as the dom0 kernel); PV
>>>>> domUs, however, work just fine as before on both dom0 kernels.
>>>>>
>>>>> xl dmesg shows the following information after the first crashed HVM
>>>>> domU which is started as part of the machine booting up:
>>>>> [...]
>>>>> (XEN) Failed vm entry (exit reason 0x80000021) caused by invalid guest
>>>>> state (0).
>>>>> (XEN) ************* VMCS Area **************
>>>>> (XEN) *** Guest State ***
>>>>> (XEN) CR0: actual=0x0000000000000039, shadow=0x0000000000000011,
>>>>> gh_mask=ffffffffffffffff
>>>>> (XEN) CR4: actual=0x0000000000002050, shadow=0x0000000000000000,
>>>>> gh_mask=ffffffffffffffff
>>>>> (XEN) CR3: actual=0x0000000000800000, target_count=0
>>>>> (XEN) target0=0000000000000000, target1=0000000000000000
>>>>> (XEN) target2=0000000000000000, target3=0000000000000000
>>>>> (XEN) RSP = 0x0000000000006fdc (0x0000000000006fdc) RIP =
>>>>> 0x0000000100000000 (0x0000000100000000)
>>>> Other than RIP looking odd for a guest still in non-paged protected
>>>> mode I can't seem to spot anything wrong with guest state.
>>> odd? That will be the source of the failure.
>>>
>>> Out of long mode, the upper 32bit of %rip should all be zero, and it
>>> should not be possible to set any of them.
>>>
>>> I suspect that the guest has exited for emulation, and there has been a
>>> bad update to %rip. The alternative (which I hope is not the case) is
>>> that there is a hardware errata which allows the guest to accidentally
>>> get it self into this condition.
>>>
>>> Are you able to rerun with a debug build of the hypervisor?
>> [snip]
>> Another question is whether prior to enabling the debug USE flag it
>> might make sense to re-compile with gcc-4.8.5 (please see my previous
>> list reply) to rule out any compiler related issues. Jan, Andrew -
>> what are your thoughts?
> First of all, check whether the compiler makes a difference on 4.5.2
Hi Andrew,
I changed the compiler and there was no change to the better:
Unfortunately the HVM domU is still crashing with a similar error
message as soon as it is being started.
> If both compiles result in a guest crashing in that manner, test a debug
> Xen to see if any assertions/errors are encountered just before the
> guest crashes.
>
As the compiler did not make any difference, I enabled the debug USE
flag, re-compiled (using gcc-4.9.3), and rebooted using a serial console
to capture output. Unfortunately I did not get very far and things
become even stranger: This time the system did not even finnish the boot
process, but rather hard-stopped pretty early with a message reading
"Panic on CPU 3: DOUBLE FAULT -- system shutdown". The captured logfile
is attached as "serial log.txt".
As this happened immediately after the CPU microcode update, I thought
there might be a connection and disabled the microcode update. After the
next reboot it seemed as if the boot process got a bit further as
evidenced by a few more lines in the log file (those between lines 136
and 197 in the second log file named "serial log no ucode.txt"), but in
the end it finnished off with an identical error message (only the CPU #
was different this time, but that number seems to change between boots
anyways).
I hope that makes some sense to you.
Many thanks for your support and best regards Atom2
[-- Attachment #2: serial log.txt --]
[-- Type: text/plain, Size: 8257 bytes --]
Xen 4.5.2
(XEN) Xen version 4.5.2 (@herrenhauspark.com) (x86_64-pc-linux-gnu-gcc (Gentoo Hardened 4.9.3 p1.2, pie-0.6.3) 4.9.3) debug=y Thu Nov 12 21:30:05 CET 2015
(XEN) Latest ChangeSet:
(XEN) Bootloader: GRUB 2.00
(XEN) Command line: placeholder ucode=-1 loglvl=all guest_loglvl=all com1=115200,8n1,0x3f8,4 console=com1,vga dom0_mem=4G,max:4G tmem=1 tmem_compress=1 tmem_dedup=1 dom0_max_vcpus=8 dom0_vcpus_pin=true cpufreq=xen cpuidle clocksource=hpet iommu=1 sched_credit_tslice_ms=5 bootscrub=0
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009d800 (usable)
(XEN) 000000000009d800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000020000000 (usable)
(XEN) 0000000020000000 - 0000000020200000 (reserved)
(XEN) 0000000020200000 - 0000000040000000 (usable)
(XEN) 0000000040000000 - 0000000040200000 (reserved)
(XEN) 0000000040200000 - 00000000db9f0000 (usable)
(XEN) 00000000db9f0000 - 00000000dc0da000 (reserved)
(XEN) 00000000dc0da000 - 00000000dc1f9000 (ACPI NVS)
(XEN) 00000000dc1f9000 - 00000000dc651000 (reserved)
(XEN) 00000000dc651000 - 00000000dc652000 (usable)
(XEN) 00000000dc652000 - 00000000dc695000 (ACPI NVS)
(XEN) 00000000dc695000 - 00000000dcdba000 (usable)
(XEN) 00000000dcdba000 - 00000000dcff2000 (reserved)
(XEN) 00000000dcff2000 - 00000000dd000000 (usable)
(XEN) 00000000dd800000 - 00000000dfa00000 (reserved)
(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed00000 - 00000000fed04000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000081e600000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT DC1E9078, 0074 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP DC1F3710, 00F4 (r4 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: DSDT DC1E9188, A587 (r2 ALASKA A M I 1 INTL 20051117)
(XEN) ACPI: FACS DC1F7F80, 0040
(XEN) ACPI: APIC DC1F3808, 0092 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT DC1F38A0, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG DC1F38E8, 003C (r1 ALASKA A M I 1072009 MSFT 97)
(XEN) ACPI: HPET DC1F3928, 0038 (r1 ALASKA A M I 1072009 AMI. 5)
(XEN) ACPI: SSDT DC1F3960, 036D (r1 SataRe SataTabl 1000 INTL 20091112)
(XEN) ACPI: SSDT DC1F3CD0, 081E (r1 PmRef Cpu0Ist 3000 INTL 20051117)
(XEN) ACPI: SSDT DC1F44F0, 0A92 (r1 PmRef CpuPm 3000 INTL 20051117)
(XEN) ACPI: DMAR DC1F4F88, 00B0 (r1 INTEL SNB 1 INTL 1)
(XEN) ACPI: ASF! DC1F5038, 00A5 (r32 INTEL HCG 1 TFSM F4240)
(XEN) System RAM: 32674MB (33458948kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000081e600000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd8d0
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - dc1f7f80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[dc1f7f8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
(XEN) Processor #3 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
(XEN) Processor #5 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 6:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 8 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2397.844 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) mce_intel.c:719: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) alt table ffff82d0802e8810 -> ffff82d0802e9830
(XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f
(XEN) PCI: MCFG area at f8000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) microcode: CPU0 updated from revision 0x28 to 0x29, date = 2013-06-12
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2a
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) microcode: CPU2 updated from revision 0x28 to 0x29, date = 2013-06-12
(XEN) microcode: CPU4 updated from revision 0x28 to 0x29, date = 2013-06-12
(XEN) *** DOUBLE FAULT ***
(XEN) ----[ Xen-4.5.2 x86_64 debug=y Not tainted ]----
(XEN) CPU: 6
(XEN) RIP: e008:[<ffff82d08017658c>] do_IRQ+0x15/0x64c
(XEN) RFLAGS: 0000000000010083 CONTEXT: hypervisor
(XEN) rax: 0000000000000000 rbx: 0000000000000028 rcx: 0000000000000000
(XEN) rdx: 0000000000000002 rsi: 0000000000000028 rdi: ffff8308063e6c68
(XEN) rbp: ffff8308063e6c58 rsp: ffff8308063e5bd8 r8: 0000000000000000
(XEN) r9: 0000000000000039 r10: ffff82d08033a2f8 r11: ffff82d08033a2e8
(XEN) r12: 0000000000000000 r13: 0000000000000000 r14: 0000000000000002
(XEN) r15: ffff83080ca74000 cr0: 000000008005003b cr4: 00000000000426f0
(XEN) cr3: 00000000db69f000 cr2: ffff8308063e5bc8
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008
(XEN) Valid stack range: ffff8308063e6000-ffff8308063e8000, sp=ffff8308063e5bd8, tss.esp0=ffff8308063e7fc0
(XEN) No stack overflow detected. Skipping stack trace.
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 6:
(XEN) DOUBLE FAULT -- system shutdown
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
[-- Attachment #3: serial log no ucode.txt --]
[-- Type: text/plain, Size: 11432 bytes --]
Xen 4.5.2
(XEN) Xen version 4.5.2 (@herrenhauspark.com) (x86_64-pc-linux-gnu-gcc (Gentoo Hardened 4.9.3 p1.2, pie-0.6.3) 4.9.3) debug=y Thu Nov 12 21:30:05 CET 2015
(XEN) Latest ChangeSet:
(XEN) Bootloader: GRUB 2.00
(XEN) Command line: placeholder loglvl=all guest_loglvl=all com1=115200,8n1,0x3f8,4 console=com1,vga dom0_mem=4G,max:4G tmem=1 tmem_compress=1 tmem_dedup=1 dom0_max_vcpus=8 dom0_vcpus_pin=true cpufreq=xen cpuidle clocksource=hpet iommu=1 sched_credit_tslice_ms=5 bootscrub=0
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009d800 (usable)
(XEN) 000000000009d800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000020000000 (usable)
(XEN) 0000000020000000 - 0000000020200000 (reserved)
(XEN) 0000000020200000 - 0000000040000000 (usable)
(XEN) 0000000040000000 - 0000000040200000 (reserved)
(XEN) 0000000040200000 - 00000000db9f0000 (usable)
(XEN) 00000000db9f0000 - 00000000dc0da000 (reserved)
(XEN) 00000000dc0da000 - 00000000dc1f9000 (ACPI NVS)
(XEN) 00000000dc1f9000 - 00000000dc651000 (reserved)
(XEN) 00000000dc651000 - 00000000dc652000 (usable)
(XEN) 00000000dc652000 - 00000000dc695000 (ACPI NVS)
(XEN) 00000000dc695000 - 00000000dcdba000 (usable)
(XEN) 00000000dcdba000 - 00000000dcff2000 (reserved)
(XEN) 00000000dcff2000 - 00000000dd000000 (usable)
(XEN) 00000000dd800000 - 00000000dfa00000 (reserved)
(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed00000 - 00000000fed04000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000081e600000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT DC1E9078, 0074 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP DC1F3710, 00F4 (r4 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: DSDT DC1E9188, A587 (r2 ALASKA A M I 1 INTL 20051117)
(XEN) ACPI: FACS DC1F7F80, 0040
(XEN) ACPI: APIC DC1F3808, 0092 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT DC1F38A0, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG DC1F38E8, 003C (r1 ALASKA A M I 1072009 MSFT 97)
(XEN) ACPI: HPET DC1F3928, 0038 (r1 ALASKA A M I 1072009 AMI. 5)
(XEN) ACPI: SSDT DC1F3960, 036D (r1 SataRe SataTabl 1000 INTL 20091112)
(XEN) ACPI: SSDT DC1F3CD0, 081E (r1 PmRef Cpu0Ist 3000 INTL 20051117)
(XEN) ACPI: SSDT DC1F44F0, 0A92 (r1 PmRef CpuPm 3000 INTL 20051117)
(XEN) ACPI: DMAR DC1F4F88, 00B0 (r1 INTEL SNB 1 INTL 1)
(XEN) ACPI: ASF! DC1F5038, 00A5 (r32 INTEL HCG 1 TFSM F4240)
(XEN) System RAM: 32674MB (33458948kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000081e600000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd8d0
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - dc1f7f80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[dc1f7f8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
(XEN) Processor #3 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
(XEN) Processor #5 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 6:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 8 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2394.622 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) mce_intel.c:719: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) alt table ffff82d0802e8810 -> ffff82d0802e9830
(XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f
(XEN) PCI: MCFG area at f8000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2a
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 8 CPUs
(XEN) tmem: initialized comp=1 dedup=1 tze=0
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 792 PIRQs
(XEN) Multiple initrd candidates, picking module #1
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x65033b
(XEN) elf_parse_binary: phdr: paddr=0x1651000 memsz=0x1e5000
(XEN) elf_parse_binary: phdr: paddr=0x1836000 memsz=0x98000
(XEN) elf_parse_binary: phdr: paddr=0x18ce000 memsz=0x1000
(XEN) elf_parse_binary: phdr: paddr=0x18cf000 memsz=0x13c98
(XEN) elf_parse_binary: phdr: paddr=0x18e3000 memsz=0x3d000
(XEN) elf_parse_binary: phdr: paddr=0x1920000 memsz=0x1120
(XEN) elf_parse_binary: phdr: paddr=0x1922000 memsz=0x2de000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1c00000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff818e31f0
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb|writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: SUPPORTED_FEATURES = 0x90d
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: MOD_START_PFN = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81c00000
(XEN) virt_entry = 0xffffffff818e31f0
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1c00000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000800000000->0000000804000000 (1029890 pages to be allocated)
(XEN) Init. ramdisk: 000000081dcff000->000000081e5fc600
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81c00000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: ffffffff81c00000->ffffffff82400000
(XEN) Start info: ffffffff82400000->ffffffff824004b4
(XEN) Page tables: ffffffff82401000->ffffffff82418000
(XEN) Boot stack: ffffffff82418000->ffffffff82419000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff818e31f0
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8165033b
(XEN) elf_load_binary: phdr 1 at 0xffffffff81651000 -> 0xffffffff81836000
(XEN) elf_load_binary: phdr 2 at 0xffffffff81836000 -> 0xffffffff818ce000
(XEN) elf_load_binary: phdr 3 at 0xffffffff818ce000 -> 0xffffffff818cf000
(XEN) elf_load_binary: phdr 4 at 0xffffffff818cf000 -> 0xffffffff818e2c98
(XEN) elf_load_binary: phdr 5 at 0xffffffff818e3000 -> 0xffffffff81920000
(XEN) elf_load_binary: phdr 6 at 0xffffffff81920000 -> 0xffffffff81921120
(XEN) elf_load_binary: phdr 7 at 0xffffffff81922000 -> 0xffffffff819dd000
(XEN) *** DOUBLE FAULT ***
(XEN) ----[ Xen-4.5.2 x86_64 debug=y Not tainted ]----
(XEN) CPU: 3
(XEN) RIP: e008:[<ffff82d08017658c>] do_IRQ+0x15/0x64c
(XEN) RFLAGS: 0000000000010083 CONTEXT: hypervisor
(XEN) rax: 000000378c762d00 rbx: 0000000000000003 rcx: 0000000000196bd0
(XEN) rdx: 000000000016c015 rsi: 00000000a0789100 rdi: ffff83080ca96d38
(XEN) rbp: ffff83080ca96d28 rsp: ffff83080ca95ca8 r8: ffff82d080339380
(XEN) r9: 0000000000000000 r10: 00000000000000d8 r11: 00000000000000d8
(XEN) r12: ffff82d08028a3c0 r13: 0000000000000001 r14: 0000000000000002
(XEN) r15: ffff83080caa8830 cr0: 000000008005003b cr4: 00000000000426f0
(XEN) cr3: 00000000db69f000 cr2: ffff83080ca95c98
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008
(XEN) Valid stack range: ffff83080ca96000-ffff83080ca98000, sp=ffff83080ca95ca8, tss.esp0=ffff83080ca97fc0
(XEN) No stack overflow detected. Skipping stack trace.
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 3:
(XEN) DOUBLE FAULT -- system shutdown
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
[-- Attachment #4: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2015-11-12 23:00 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-12 1:08 HVM domains crash after upgrade from XEN 4.5.1 to 4.5.2 Atom2
2015-11-12 12:52 ` Jan Beulich
2015-11-12 13:01 ` Andrew Cooper
2015-11-12 14:29 ` Atom2
2015-11-12 15:32 ` Jan Beulich
2015-11-12 16:43 ` Andrew Cooper
2015-11-12 23:00 ` Atom2 [this message]
2015-11-13 7:25 ` Jan Beulich
2015-11-13 10:09 ` Andrew Cooper
2015-11-14 0:16 ` Atom2
2015-11-14 20:32 ` Andrew Cooper
2015-11-15 0:14 ` Atom2
2015-11-15 15:12 ` Andrew Cooper
2015-11-16 0:39 ` Atom2
2015-11-16 10:02 ` Andrew Cooper
2015-11-15 20:12 ` Doug Goldstein
2015-11-16 1:05 ` Atom2
2015-11-16 15:31 ` Konrad Rzeszutek Wilk
2015-11-16 19:16 ` Atom2
2015-11-16 19:25 ` Konrad Rzeszutek Wilk
2015-11-16 19:39 ` Doug Goldstein
2015-11-16 19:47 ` Konrad Rzeszutek Wilk
2015-11-16 19:45 ` Atom2
2015-11-16 23:01 ` Andrew Cooper
2015-11-16 23:10 ` Atom2
2015-11-18 22:51 ` Atom2
2015-11-18 23:17 ` Andrew Cooper
2015-11-19 0:31 ` Atom2
2015-11-19 1:06 ` Andrew Cooper
2015-11-19 20:02 ` Atom2
2015-11-19 23:53 ` Andrew Cooper
2015-11-24 11:53 ` Atom2
2015-11-19 10:24 ` Jan Beulich
2015-11-19 10:38 ` Andrew Cooper
2015-11-19 19:51 ` Atom2
2015-11-20 7:57 ` Jan Beulich
2015-11-24 10:32 ` Atom2
2015-11-24 10:43 ` Jan Beulich
2015-11-27 22:51 ` Atom2
2015-11-30 9:04 ` Jan Beulich
2015-11-16 19:47 ` Doug Goldstein
2015-11-16 20:14 ` Atom2
2015-11-12 14:12 ` Atom2
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56451A2B.9090706@web2web.at \
--to=ariel.atom2@web2web.at \
--cc=JBeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.