From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/10] sunxi: dts: sun8i: Add Allwinner A83T dtsi
Date: Fri, 13 Nov 2015 18:26:42 +0100 [thread overview]
Message-ID: <56461D52.90004@redhat.com> (raw)
In-Reply-To: <1447351758-10413-10-git-send-email-vishnupatekar0510@gmail.com>
Hi,
On 12-11-15 19:09, Vishnu Patekar wrote:
> Allwinner A83T is new octa-core cortex-a7 SOC.
> This adds the basic dtsi, the clocks differs from
> earlier sun8i SOCs.
>
> This is not yet included in kernel.
>
> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
> ---
> arch/arm/dts/sun8i-a83t.dtsi | 247 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 247 insertions(+)
> create mode 100644 arch/arm/dts/sun8i-a83t.dtsi
>
> diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi
> new file mode 100644
> index 0000000..da1b451
> --- /dev/null
> +++ b/arch/arm/dts/sun8i-a83t.dtsi
> @@ -0,0 +1,247 @@
> +/*
> + * Copyright 2015 Vishnu Patekar
> + *
> + * Vishnu Patekar <vishnupatekar0510@gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> +
> + */
> +
> +#include "skeleton.dtsi"
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> +
> + chosen {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <0>;
> + };
> +
> + cpu at 1 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <1>;
> + };
> +
> + cpu at 2 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <2>;
> + };
> +
> + cpu at 3 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <3>;
> + };
> + cpu at 100 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <100>;
This must be reg = <0x100>;
> + };
> +
> + cpu at 101 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <101>;
Idem.
> + };
> + cpu at 102 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <102>;
Idem.
> + };
> +
> + cpu at 103 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <103>;
Idem.
Regards,
Hans
> + };
> + };
> +
> + memory {
> + reg = <0x40000000 0x80000000>;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <24000000>;
> + arm,cpu-registers-not-fw-configured;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc24M: osc24M_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "osc24M";
> + };
> +
> + osc32k: osc32k_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> + };
> +
> + soc at 01c00000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gic: interrupt-controller at 01c81000 {
> + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
> + reg = <0x01c81000 0x1000>,
> + <0x01c82000 0x1000>,
> + <0x01c84000 0x2000>,
> + <0x01c86000 0x2000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + pio: pinctrl at 01c20800 {
> + compatible = "allwinner,sun8i-a83t-pinctrl";
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x01c20800 0x400>;
> + clocks = <&osc24M>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #gpio-cells = <3>;
> +
> + i2c0_pins_a: i2c0 at 0 {
> + allwinner,pins = "PH0", "PH1";
> + allwinner,function = "i2c0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + i2c1_pins_a: i2c1 at 0 {
> + allwinner,pins = "PH2", "PH3";
> + allwinner,function = "i2c1";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + i2c2_pins_a: i2c2 at 0 {
> + allwinner,pins = "PH4", "PH5";
> + allwinner,function = "i2c2";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + mmc0_pins_a: mmc0 at 0 {
> + allwinner,pins = "PF0", "PF1", "PF2",
> + "PF3", "PF4", "PF5";
> + allwinner,function = "mmc0";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + mmc1_pins_a: mmc1 at 0 {
> + allwinner,pins = "PG0", "PG1", "PG2",
> + "PG3", "PG4", "PG5";
> + allwinner,function = "mmc1";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + mmc2_8bit_pins: mmc2_8bit {
> + allwinner,pins = "PC5", "PC6", "PC8",
> + "PC9", "PC10", "PC11",
> + "PC12", "PC13", "PC14",
> + "PC15";
> + allwinner,function = "mmc2";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart0_pins_a: uart0 at 0 {
> + allwinner,pins = "PF2", "PF4";
> + allwinner,function = "uart0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart0_pins_b: uart0 at 1 {
> + allwinner,pins = "PB9", "PB10";
> + allwinner,function = "uart0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> + };
> +
> + uart0: serial at 01c28000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28000 0x400>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&osc24M>;
> + status = "disabled";
> + };
> + };
> +};
>
next prev parent reply other threads:[~2015-11-13 17:26 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-12 18:09 [U-Boot] [PATCH 00/10] basic support for Allwinner A83T SOC Vishnu Patekar
2015-11-12 18:09 ` [U-Boot] [PATCH 01/10] sunxi: Add Machine Support for " Vishnu Patekar
2015-11-13 17:19 ` Hans de Goede
2015-11-14 18:35 ` Vishnu Patekar
2015-11-12 18:09 ` [U-Boot] [PATCH 02/10] sunxi: Add support for UART0 in PB pin group on A83T Vishnu Patekar
2015-11-13 17:19 ` Hans de Goede
2015-11-12 18:09 ` [U-Boot] [PATCH 03/10] sunxi: power: axp818: add support for axp818 driver Vishnu Patekar
2015-11-13 17:21 ` Hans de Goede
2015-11-12 18:09 ` [U-Boot] [PATCH 04/10] sunxi: power: enabled support for axp818 Vishnu Patekar
2015-11-13 17:24 ` Hans de Goede
2015-11-14 18:43 ` Vishnu Patekar
2015-11-12 18:09 ` [U-Boot] [PATCH 05/10] sunxi: do not enable smp for A83T Vishnu Patekar
2015-11-13 17:24 ` Hans de Goede
2015-11-12 18:09 ` [U-Boot] [PATCH 06/10] sunxi: clk: add basic clocks " Vishnu Patekar
2015-11-13 17:25 ` Hans de Goede
2015-11-14 18:47 ` Vishnu Patekar
2015-11-15 2:10 ` Chen-Yu Tsai
2015-11-12 18:09 ` [U-Boot] [PATCH 07/10] sunxi: Add support for Allwinner A83T DRAM Vishnu Patekar
2015-11-13 17:25 ` Hans de Goede
2015-11-12 18:09 ` [U-Boot] [PATCH 08/10] sunxi: do not include display for A83T Vishnu Patekar
2015-11-13 17:25 ` Hans de Goede
2015-11-12 18:09 ` [U-Boot] [PATCH 09/10] sunxi: dts: sun8i: Add Allwinner A83T dtsi Vishnu Patekar
2015-11-13 17:26 ` Hans de Goede [this message]
2015-11-12 18:09 ` [U-Boot] [PATCH 10/10] sunxi: Add suport for A83T HomletV2 Board by Allwinner Vishnu Patekar
2015-11-13 17:27 ` Hans de Goede
2015-11-13 16:52 ` [U-Boot] [PATCH 00/10] basic support for Allwinner A83T SOC Hans de Goede
2015-11-13 17:05 ` Chen-Yu Tsai
2015-11-14 18:32 ` Vishnu Patekar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56461D52.90004@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.