All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Daniel Baluta <daniel.baluta@gmail.com>,
	Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>,
	"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Subject: Re: [PATCH v4] iio: st-accel: add support for lis2dh12
Date: Sat, 14 Nov 2015 19:06:07 +0000	[thread overview]
Message-ID: <5647861F.80209@kernel.org> (raw)
In-Reply-To: <CAEnQRZCSrnQdJ+zCS-2dFJZWfnGzNLAE2ChxVFgsTuK+66QG3A@mail.gmail.com>

On 12/11/15 08:25, Daniel Baluta wrote:
> On Thu, Nov 12, 2015 at 9:36 AM, Giuseppe Barba <giuseppe.barba@st.com> wrote:
>> This commit add support for STMicroelectronics lis2dh12 accelerometer.
>> Datasheet for this device can be found here:
>>
>> http://www.st.com/st-web-ui/static/active/en/resource/technical/
>> document/datasheet/DM00091513.pdf
>>
>> Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
> 
> Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play.
> 
>> ---
>>  Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
>>  drivers/iio/accel/Kconfig                            | 2 +-
>>  drivers/iio/accel/st_accel.h                         | 1 +
>>  drivers/iio/accel/st_accel_core.c                    | 1 +
>>  drivers/iio/accel/st_accel_i2c.c                     | 5 +++++
>>  drivers/iio/accel/st_accel_spi.c                     | 1 +
>>  6 files changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
>> index d3ccdb1..d4b87cc 100644
>> --- a/Documentation/devicetree/bindings/iio/st-sensors.txt
>> +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
>> @@ -36,6 +36,7 @@ Accelerometers:
>>  - st,lsm303dlm-accel
>>  - st,lsm330-accel
>>  - st,lsm303agr-accel
>> +- st,lis2dh12-accel
>>
>>  Gyroscopes:
>>  - st,l3g4200d-gyro
>> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
>> index 87487d3..edc29b1 100644
>> --- a/drivers/iio/accel/Kconfig
>> +++ b/drivers/iio/accel/Kconfig
>> @@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS
>>         help
>>           Say yes here to build support for STMicroelectronics accelerometers:
>>           LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
>> -         LIS331DLH, LSM303DL, LSM303DLM, LSM330.
>> +         LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
>>
>>           This driver can also be built as a module. If so, these modules
>>           will be created:
>> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
>> index 468f21f..5d4a189 100644
>> --- a/drivers/iio/accel/st_accel.h
>> +++ b/drivers/iio/accel/st_accel.h
>> @@ -27,6 +27,7 @@
>>  #define LSM303DLM_ACCEL_DEV_NAME       "lsm303dlm_accel"
>>  #define LSM330_ACCEL_DEV_NAME          "lsm330_accel"
>>  #define LSM303AGR_ACCEL_DEV_NAME       "lsm303agr_accel"
>> +#define LIS2DH12_ACCEL_DEV_NAME                "lis2dh12_accel"
>>
>>  /**
>>  * struct st_sensors_platform_data - default accel platform data
>> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
>> index dab8b76..9d973f1 100644
>> --- a/drivers/iio/accel/st_accel_core.c
>> +++ b/drivers/iio/accel/st_accel_core.c
>> @@ -234,6 +234,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>>                         [3] = LSM330DL_ACCEL_DEV_NAME,
>>                         [4] = LSM330DLC_ACCEL_DEV_NAME,
>>                         [5] = LSM303AGR_ACCEL_DEV_NAME,
>> +                       [6] = LIS2DH12_ACCEL_DEV_NAME,
>>                 },
>>                 .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
>>                 .odr = {
>> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
>> index 8b9cc84..294a32f 100644
>> --- a/drivers/iio/accel/st_accel_i2c.c
>> +++ b/drivers/iio/accel/st_accel_i2c.c
>> @@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = {
>>                 .compatible = "st,lsm303agr-accel",
>>                 .data = LSM303AGR_ACCEL_DEV_NAME,
>>         },
>> +       {
>> +               .compatible = "st,lis2dh12-accel",
>> +               .data = LIS2DH12_ACCEL_DEV_NAME,
>> +       },
>>         {},
>>  };
>>  MODULE_DEVICE_TABLE(of, st_accel_of_match);
>> @@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
>>         { LSM303DLM_ACCEL_DEV_NAME },
>>         { LSM330_ACCEL_DEV_NAME },
>>         { LSM303AGR_ACCEL_DEV_NAME },
>> +       { LIS2DH12_ACCEL_DEV_NAME },
>>         {},
>>  };
>>  MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
>> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
>> index 54b61a3..e82bedf 100644
>> --- a/drivers/iio/accel/st_accel_spi.c
>> +++ b/drivers/iio/accel/st_accel_spi.c
>> @@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = {
>>         { LSM303DLM_ACCEL_DEV_NAME },
>>         { LSM330_ACCEL_DEV_NAME },
>>         { LSM303AGR_ACCEL_DEV_NAME },
>> +       { LIS2DH12_ACCEL_DEV_NAME },
>>         {},
>>  };
>>  MODULE_DEVICE_TABLE(spi, st_accel_id_table);
>> --
>> 1.9.1
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


      reply	other threads:[~2015-11-14 19:06 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-12  7:36 [PATCH v4] iio: st-accel: add support for lis2dh12 Giuseppe Barba
2015-11-12  7:49 ` Denis Ciocca
2015-11-12  8:25 ` Daniel Baluta
2015-11-14 19:06   ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5647861F.80209@kernel.org \
    --to=jic23@kernel.org \
    --cc=daniel.baluta@gmail.com \
    --cc=denis.ciocca@st.com \
    --cc=giuseppe.barba@st.com \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.