All of lore.kernel.org
 help / color / mirror / Atom feed
From: Clemens Ladisch <clemens@ladisch.de>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: [PATCH 2/3] ALSA: usb-audio: prevent CH345 multiport output SysEx	corruption
Date: Sun, 15 Nov 2015 22:38:29 +0100	[thread overview]
Message-ID: <5648FB55.1000406@ladisch.de> (raw)
In-Reply-To: <5648FAED.8020300@ladisch.de>

The CH345 USB MIDI chip has two output ports.  However, they are
multiplexed through one pin, and the number of ports cannot be reduced
even for hardware that implements only one connector, so for those
devices, data sent to either port ends up on the same hardware output.
This becomes a problem when both ports are used at the same time, as
longer MIDI commands (such as SysEx messages) are likely to be
interrupted by messages from the other port, and thus to get lost.

It would not be possible for the driver to detect how many ports the
device actually has, except that in practice, _all_ devices built with
the CH345 have only one port.  So we can just ignore the device's
descriptors, and hardcode one output port.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@vger.kernel.org
---
 sound/usb/midi.c         |    3 +++
 sound/usb/quirks-table.h |   11 +++++++++++
 sound/usb/quirks.c       |    1 +
 sound/usb/usbaudio.h     |    1 +
 4 files changed, 16 insertions(+)

diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 68e9f9a..010094a 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -2379,6 +2379,9 @@ int snd_usbmidi_create(struct snd_card *card,

 		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 		break;
+	case QUIRK_MIDI_CH345:
+		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+		break;
 	default:
 		dev_err(&umidi->dev->dev, "invalid quirk type %d\n",
 			quirk->type);
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 1a1e2e4..c60a776 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2829,6 +2829,17 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	.idProduct = 0x1020,
 },

+/* QinHeng devices */
+{
+	USB_DEVICE(0x1a86, 0x752d),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "QinHeng",
+		.product_name = "CH345",
+		.ifnum = 1,
+		.type = QUIRK_MIDI_CH345
+	}
+},
+
 /* KeithMcMillen Stringport */
 {
 	USB_DEVICE(0x1f38, 0x0001),
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 75a9d4b..f529102 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -538,6 +538,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
 		[QUIRK_MIDI_CME] = create_any_midi_quirk,
 		[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
 		[QUIRK_MIDI_FTDI] = create_any_midi_quirk,
+		[QUIRK_MIDI_CH345] = create_any_midi_quirk,
 		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
 		[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
 		[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 15a1271..b665d85 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -95,6 +95,7 @@ enum quirk_type {
 	QUIRK_MIDI_AKAI,
 	QUIRK_MIDI_US122L,
 	QUIRK_MIDI_FTDI,
+	QUIRK_MIDI_CH345,
 	QUIRK_AUDIO_STANDARD_INTERFACE,
 	QUIRK_AUDIO_FIXED_ENDPOINT,
 	QUIRK_AUDIO_EDIROL_UAXX,

  parent reply	other threads:[~2015-11-15 21:39 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-15 21:36 [PATCH 0/3] various USB MIDI workarounds Clemens Ladisch
2015-11-15 21:37 ` [PATCH 1/3] ALSA: usb-audio: add packet size quirk for the Medeli DD305 Clemens Ladisch
2015-11-15 21:38 ` Clemens Ladisch [this message]
2015-11-15 21:39 ` [PATCH 3/3] ALSA: usb-audio: work around CH345 input SysEx corruption Clemens Ladisch
2015-11-16  8:04 ` [PATCH 0/3] various USB MIDI workarounds Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5648FB55.1000406@ladisch.de \
    --to=clemens@ladisch.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.