[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

please pull from u-boot-imx, thanks!

The following changes since commit 038be18fd95aa6283eafb85ceabc0b880976424b:

  nios2: add 3c120 and 10m50 devboards MAINTAINERS (2015-11-12 08:26:59
+0800)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ec26c1eef735befb7011c24e08e6310ab6dc9be6:

  arm: mx6: cm-fx6: add splash locations to cm-fx6 (2015-11-16 12:01:36
+0100)

----------------------------------------------------------------
Adrian Alonso (10):
      imx: cpu: move common chip revision id's
      imx: hab: rework secure boot support for imx6
      imx: hab: use unified rom section for mx6sx and mx6ul
      imx: hab: rework unified rom section for mx7
      imx: hab: add secure boot fuse details
      arm: imx: add secure boot fuse details for imx6 SoC
      arm: imx: add secure boot fuse details for imx7 SoC
      imx: hab: use read_fuse for secure boot settings
      imx: hab: add mx7 secure boot support
      mx7dsabresd: add secure boot support

Anthony Felice (1):
      vf610twr: Fix typo in DRAM init

Damien Riegel (1):
      ts4800: add CONFIG_OF_LIBFDT

Fabio Estevam (7):
      mx6sabresd: Remove empty reset_cpu()
      mx6slevk: Remove empty reset_cpu()
      mx6sxsabresd: Remove empty reset_cpu()
      mx6ul_14x14_evk: Remove empty reset_cpu()
      novena: Remove empty reset_cpu()
      ot1200: Remove empty reset_cpu()
      gw_ventana: Remove empty reset_cpu()

Heiko Schocher (3):
      arm, imx: add some gpr register defines
      arm, imx6, aristainetos2: set gpr register after reset
      imx35, flea3: add FIT image support

Marek Vasut (1):
      arm: novena: Fix kernel_addr_r env variable

Nikita Kiryanov (5):
      splash_source: rename *_read() to *_read_raw()
      splash_source: add support for filesystem formatted mmc
      splash_source: add support for filesystem formatted usb
      splash_source: add support for filesystem formatted sata
      arm: mx6: cm-fx6: add splash locations to cm-fx6

Peng Fan (22):
      imx-common: timer: clean up code
      driver: misc: add MXC_OCOTP Kconfig entry
      imx: mx6sabresd discard PHYS_SDRAM_SIZE
      imx: mx6sabresd: add i.MX6DQP Sabresd support
      arm: discard relocation entries for secure text
      mx7: psci: add basic psci support
      imx: mx7: default enable non-secure mode
      mxs: add parameter base_addr for mxs_set_lcdclk
      xfi3: correct function name
      mxs: regs-common.h must be wrapped with !__ASSEMBLY__
      imx: include linux/types.h for regs-common.h
      imx: imx-common: move lcdif structure and macro definition to
imx-common
      imx: lcdif: use one register structure for i.MXes
      imx: mx6: fix register address
      imx: mx6: crm_reg: add LCDIF related macros
      imx: mx6: add clock api for lcdif
      imx: mx6ul_14x14_evk: support lcdif display
      video: mxsfb: introduce lcdif_power_down
      imx: mx6: implement reset_misc
      imx: imx-common: power down lcdif before boot os
      imx: mx7: compile misc.c for mx7
      imx: mx7dsabresd: support lcdif

Stefano Babic (5):
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge git://git.denx.de/u-boot
      imx6: fix warnings due to switch to distro environment

Tzu-Jung Lee (1):
      mx7dsabresd: enable DFU support

Vagrant Cascadian (2):
      arm: imx: Switch Wandboard to use config_distro_bootcmd.h.
      arm: imx: Switch mx6cuboxi to use config_distro_bootcmd.h.

 arch/arm/cpu/arm926ejs/mx25/generic.c              |   1 +
 arch/arm/cpu/arm926ejs/mxs/clock.c                 |   2 +-
 arch/arm/cpu/armv7/mx6/Kconfig                     |   2 +
 arch/arm/cpu/armv7/mx6/Makefile                    |   1 -
 arch/arm/cpu/armv7/mx6/clock.c                     | 245
+++++++++++++++++++++
 arch/arm/cpu/armv7/mx6/soc.c                       |  15 ++
 arch/arm/cpu/armv7/mx7/Kconfig                     |   2 +
 arch/arm/cpu/armv7/mx7/Makefile                    |   4 +
 arch/arm/cpu/armv7/mx7/psci-mx7.c                  |  69 ++++++
 arch/arm/cpu/armv7/mx7/psci.S                      |  54 +++++
 arch/arm/cpu/armv7/mx7/soc.c                       |  17 ++
 arch/arm/cpu/u-boot.lds                            |  17 ++
 arch/arm/imx-common/Kconfig                        |   3 +
 arch/arm/imx-common/Makefile                       |   3 +-
 arch/arm/imx-common/cpu.c                          |   3 +
 arch/arm/{cpu/armv7/mx6 => imx-common}/hab.c       |  25 ++-
 arch/arm/imx-common/timer.c                        |  75 +------
 arch/arm/include/asm/arch-imx/cpu.h                |  12 +
 arch/arm/include/asm/arch-mx25/imx-regs.h          |   4 -
 arch/arm/include/asm/arch-mx5/imx-regs.h           |  11 -
 arch/arm/include/asm/arch-mx6/clock.h              |   2 +
 arch/arm/include/asm/arch-mx6/crm_regs.h           |  34 ++-
 arch/arm/include/asm/arch-mx6/imx-regs.h           |  57 ++++-
 arch/arm/include/asm/arch-mx7/imx-regs.h           |  99 +--------
 arch/arm/include/asm/arch-mxs/clock.h              |   2 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h           |   2 +-
 .../arm/include/asm/{arch-mx6 => imx-common}/hab.h |  11 +-
 arch/arm/include/asm/imx-common/regs-common.h      |   2 +
 .../asm/{arch-mxs => imx-common}/regs-lcdif.h      |  30 ++-
 arch/arm/include/asm/imx-common/sys_proto.h        |   2 +
 board/aristainetos/aristainetos-v2.c               |  16 ++
 board/bachmann/ot1200/ot1200_spl.c                 |   4 -
 board/compulab/cm_fx6/cm_fx6.c                     |  19 ++
 board/compulab/cm_t35/cm_t35.c                     |   1 +
 board/creative/xfi3/xfi3.c                         |   2 +-
 board/freescale/mx6sabresd/mx6sabresd.c            |  73 +++++-
 board/freescale/mx6slevk/mx6slevk.c                |   4 -
 board/freescale/mx6sxsabresd/mx6sxsabresd.c        |   4 -
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c  |  67 +++++-
 board/freescale/mx7dsabresd/imximage.cfg           |   7 +
 board/freescale/mx7dsabresd/mx7dsabresd.c          |  64 ++++++
 board/gateworks/gw_ventana/gw_ventana_spl.c        |   4 -
 board/kosagi/novena/novena_spl.c                   |   4 -
 common/splash_source.c                             | 125 ++++++++++-
 doc/README.splashprepare                           |   5 +
 drivers/misc/Kconfig                               |   7 +
 drivers/video/mxsfb.c                              |  19 +-
 include/configs/flea3.h                            |   4 +
 include/configs/mx6cuboxi.h                        |  88 ++------
 include/configs/mx6sabre_common.h                  |   2 +
 include/configs/mx6sabresd.h                       |   1 -
 include/configs/mx6ul_14x14_evk.h                  |  18 ++
 include/configs/mx7_common.h                       |  12 +-
 include/configs/mx7dsabresd.h                      |  48 ++++
 include/configs/novena.h                           |   2 +-
 include/configs/ts4800.h                           |   2 +
 include/configs/wandboard.h                        |  82 ++-----
 include/splash.h                                   |  10 +
 58 files changed, 1105 insertions(+), 395 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx7/psci-mx7.c
 create mode 100644 arch/arm/cpu/armv7/mx7/psci.S
 rename arch/arm/{cpu/armv7/mx6 => imx-common}/hab.c (96%)
 rename arch/arm/include/asm/{arch-mx6 => imx-common}/hab.h (96%)
 rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-lcdif.h (92%)

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================