All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/17] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
Date: Mon, 16 Nov 2015 12:28:37 +0100	[thread overview]
Message-ID: <5649BDE5.9060807@denx.de> (raw)
In-Reply-To: <1447185213-5799-10-git-send-email-marex@denx.de>

Hello Marek,

Am 10.11.2015 um 20:53 schrieb Marek Vasut:
> Pull this macro to the beginning of the cmd_eeprom.c and remove
> another nasty ifdef from the code. Note that this is legal, since
> udelay(0) changes the behavior only such that it pings the WDT if
> WDT is enabled and otherwise does not wait.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Heiko Schocher <hs@denx.de>
> ---
>   common/cmd_eeprom.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)


Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
> index 040ab5f..8451d63 100644
> --- a/common/cmd_eeprom.c
> +++ b/common/cmd_eeprom.c
> @@ -29,6 +29,10 @@
>   #define	CONFIG_SYS_I2C_SPEED	50000
>   #endif
>
> +#ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
> +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	0
> +#endif
> +
>   /*
>    * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
>    *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
> @@ -211,9 +215,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
>   		buffer += len;
>   		offset += len;
>
> -#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
>   		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
> -#endif
>   	}
>
>   	eeprom_write_enable(dev_addr, 0);
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

  reply	other threads:[~2015-11-16 11:28 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-10 19:53 [U-Boot] [PATCH 01/17] tricorder: rewrite tricordereeprom command Marek Vasut
2015-11-10 19:53 ` [U-Boot] [PATCH 02/17] eeprom: Shuffle code around Marek Vasut
2015-11-16 11:26   ` Heiko Schocher
2015-11-22 15:53   ` [U-Boot] [U-Boot,02/17] " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 03/17] eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS Marek Vasut
2015-11-16 11:26   ` Heiko Schocher
2015-11-22 15:53   ` [U-Boot] [U-Boot, " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 04/17] eeprom: Zap CONFIG_SYS_EEPROM_X40430 Marek Vasut
2015-11-16 11:27   ` Heiko Schocher
2015-11-22 15:53   ` [U-Boot] [U-Boot,04/17] " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 05/17] eeprom: Zap eeprom_probe() Marek Vasut
2015-11-16 11:27   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot,05/17] " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 06/17] eeprom: Zap CONFIG_SPI_X Marek Vasut
2015-11-16 11:27   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot,06/17] " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 07/17] eeprom: Pull out the I/O code Marek Vasut
2015-11-16 11:27   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot,07/17] " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 08/17] eeprom: Pull out address computation Marek Vasut
2015-11-16 11:28   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot,08/17] " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 09/17] eeprom: Make eeprom_write_enable() weak Marek Vasut
2015-11-16 11:28   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot, " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 10/17] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS Marek Vasut
2015-11-16 11:28   ` Heiko Schocher [this message]
2015-11-22 15:54   ` [U-Boot] [U-Boot, " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 11/17] eeprom: Suck the ifdef into eeprom_init() Marek Vasut
2015-11-16 11:28   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot, " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 12/17] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_BITS Marek Vasut
2015-11-16 11:29   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot, " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 13/17] eeprom: Pull out transfer length computation Marek Vasut
2015-11-16 11:31   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot, " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 14/17] eeprom: Pull out the RW loop Marek Vasut
2015-11-16 11:31   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot,14/17] " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 15/17] eeprom: Add bus argument to eeprom_init() Marek Vasut
2015-11-16 11:32   ` Heiko Schocher
2015-11-21 13:48     ` Tom Rini
2015-11-22 15:54   ` [U-Boot] [U-Boot, " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 16/17] eeprom: Add support for selecting i2c bus Marek Vasut
2015-11-16 11:32   ` Heiko Schocher
2015-11-22 15:54   ` [U-Boot] [U-Boot, " Tom Rini
2015-11-10 19:53 ` [U-Boot] [PATCH 17/17] eeprom: Clean up checkpatch issues Marek Vasut
2015-11-16 11:32   ` Heiko Schocher
2015-11-22 15:55   ` [U-Boot] [U-Boot,17/17] " Tom Rini
2015-11-16 11:26 ` [U-Boot] [PATCH 01/17] tricorder: rewrite tricordereeprom command Heiko Schocher
2015-11-22 15:53 ` [U-Boot] [U-Boot, " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5649BDE5.9060807@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.