From: Eric Ren <zren@suse.com>
To: ocfs2-devel@oss.oracle.com
Subject: [Ocfs2-devel] v4.3 kernel panic when run ocfs2-test single test
Date: Wed, 18 Nov 2015 17:51:55 +0800 [thread overview]
Message-ID: <564C4A3B.3060605@suse.com> (raw)
In-Reply-To: <564C11EA.4000504@oracle.com>
Hi Junxiao,
On 11/18/15 13:51, Junxiao Bi wrote:
> Hi,
>
> The following kernel panic was saw when run ocfs2-test single test for
> v4.3 kernel. Anybody ever saw this?
I have not tested ocfs2 with new kernel yet.
Which test case crashed, mmaptruncate?
Could you please use kdump & crash tools to locate the point in source code?
[ 6538.406686] [<ffffffffa06a309d>] ? ===> debuginfo needed? maybe
ocfs2_read_group_descriptor+0x6d/0xa0 [ocfs2] ===> where is 0x6d/0xa0 in code?
Thanks,
Eric
>
> [ 6538.405938] ------------[ cut here ]------------
> [ 6538.406686] kernel BUG at fs/ocfs2/suballoc.c:2400!
> [ 6538.406686] invalid opcode: 0000 [#1] SMP
> [ 6538.406686] Modules linked in: ocfs2 nfsd lockd grace nfs_acl
> auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm
> ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT
> nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack
> ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio
> cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm
> ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi
> scsi_transport_iscsi ppdev xen_kbdfront xen_netfront xen_fbfront
> parport_pc parport pcspkr i2c_piix4 acpi_cpufreq ext4 jbd2 mbcache
> xen_blkfront floppy pata_acpi ata_generic ata_piix cirrus ttm
> drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect i2c_core
> syscopyarea dm_mirror dm_region_hash dm_log dm_mod
> [ 6538.406686] CPU: 1 PID: 16265 Comm: mmap_truncate Not tainted 4.3.0 #1
> [ 6538.406686] Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014
> [ 6538.406686] task: ffff88007c2bab00 ti: ffff880075b78000 task.ti:
> ffff880075b78000
> [ 6538.406686] RIP: 0010:[<ffffffffa06a286b>] [<ffffffffa06a286b>]
> ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2]
> [ 6538.406686] RSP: 0018:ffff880075b7b7f8 EFLAGS: 00010246
> [ 6538.406686] RAX: ffff8800760c5b40 RBX: ffff88006c06a000 RCX:
> ffffffffa06e6df0
> [ 6538.406686] RDX: 0000000000000000 RSI: ffff88007a6f6ea0 RDI:
> ffff88007a760430
> [ 6538.406686] RBP: ffff880075b7b878 R08: 0000000000000002 R09:
> 0000000000000001
> [ 6538.406686] R10: ffffffffa06769be R11: 0000000000000000 R12:
> 0000000000000001
> [ 6538.406686] R13: ffffffffa06a1750 R14: 0000000000000001 R15:
> ffff88007a6f6ea0
> [ 6538.406686] FS: 00007f17fde30720(0000) GS:ffff88007f040000(0000)
> knlGS:0000000000000000
> [ 6538.406686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 6538.406686] CR2: 0000000000601730 CR3: 000000007aea0000 CR4:
> 00000000000406e0
> [ 6538.406686] Stack:
> [ 6538.406686] ffff88007c2bb5b0 ffff880075b7b8e0 ffff88007a7604b0
> ffff88006c640800
> [ 6538.406686] ffff88007a7604b0 ffff880075d77390 0000000075b7b878
> ffffffffa06a309d
> [ 6538.406686] ffff880075d752d8 ffff880075b7b990 ffff880075b7b898
> 0000000000000000
> [ 6538.406686] Call Trace:
> [ 6538.406686] [<ffffffffa06a309d>] ?
> ocfs2_read_group_descriptor+0x6d/0xa0 [ocfs2]
> [ 6538.406686] [<ffffffffa06a3654>]
> _ocfs2_free_suballoc_bits+0xe4/0x320 [ocfs2]
> [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2]
> [ 6538.406686] [<ffffffffa06a397e>] _ocfs2_free_clusters+0xee/0x210 [ocfs2]
> [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2]
> [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2]
> [ 6538.406686] [<ffffffffa0682d50>] ? ocfs2_extend_trans+0x50/0x1a0 [ocfs2]
> [ 6538.406686] [<ffffffffa06a3ad5>] ocfs2_free_clusters+0x15/0x20 [ocfs2]
> [ 6538.406686] [<ffffffffa065072c>]
> ocfs2_replay_truncate_records+0xfc/0x290 [ocfs2]
> [ 6538.406686] [<ffffffffa06843ac>] ? ocfs2_start_trans+0xec/0x1d0 [ocfs2]
> [ 6538.406686] [<ffffffffa0654600>]
> __ocfs2_flush_truncate_log+0x140/0x2d0 [ocfs2]
> [ 6538.406686] [<ffffffffa0654394>] ?
> ocfs2_reserve_blocks_for_rec_trunc.clone.0+0x44/0x170 [ocfs2]
> [ 6538.406686] [<ffffffffa065acd4>]
> ocfs2_remove_btree_range+0x374/0x630 [ocfs2]
> [ 6538.406686] [<ffffffffa017486b>] ? jbd2_journal_stop+0x25b/0x470 [jbd2]
> [ 6538.406686] [<ffffffffa065d5b5>] ocfs2_commit_truncate+0x305/0x670
> [ocfs2]
> [ 6538.406686] [<ffffffffa0683430>] ? ocfs2_journal_access_eb+0x20/0x20
> [ocfs2]
> [ 6538.406686] [<ffffffffa067adb7>] ocfs2_truncate_file+0x297/0x380 [ocfs2]
> [ 6538.406686] [<ffffffffa01759e4>] ?
> jbd2_journal_begin_ordered_truncate+0x64/0xc0 [jbd2]
> [ 6538.406686] [<ffffffffa067c7a2>] ocfs2_setattr+0x572/0x860 [ocfs2]
> [ 6538.406686] [<ffffffff810e4a3f>] ? current_fs_time+0x3f/0x50
> [ 6538.406686] [<ffffffff812124b7>] notify_change+0x1d7/0x340
> [ 6538.406686] [<ffffffff8121abf9>] ? generic_getxattr+0x79/0x80
> [ 6538.406686] [<ffffffff811f5876>] do_truncate+0x66/0x90
> [ 6538.406686] [<ffffffff81120e30>] ? __audit_syscall_entry+0xb0/0x110
> [ 6538.406686] [<ffffffff811f5bb3>] do_sys_ftruncate.clone.0+0xf3/0x120
> [ 6538.406686] [<ffffffff811f5bee>] SyS_ftruncate+0xe/0x10
> [ 6538.406686] [<ffffffff816aa2ae>] entry_SYSCALL_64_fastpath+0x12/0x71
> [ 6538.406686] Code: 28 48 81 ee b0 04 00 00 48 8b 92 50 fb ff ff 48 8b
> 80 b0 03 00 00 48 39 90 88 00 00 00 0f 84 30 fe ff ff 0f 0b eb fe 0f 0b
> eb fe <0f> 0b 0f 1f 00 eb fb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
> [ 6538.406686] RIP [<ffffffffa06a286b>]
> ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2]
> [ 6538.406686] RSP <ffff880075b7b7f8>
> [ 6538.691128] ---[ end trace 31cd7011d6770d7e ]---
> [ 6538.694492] Kernel panic - not syncing: Fatal exception
> [ 6538.695484] Kernel Offset: disabled
>
> Thanks,
> Junxiao.
>
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel at oss.oracle.com
> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
>
next prev parent reply other threads:[~2015-11-18 9:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-18 5:51 [Ocfs2-devel] v4.3 kernel panic when run ocfs2-test single test Junxiao Bi
2015-11-18 9:51 ` Eric Ren [this message]
2015-11-19 4:44 ` Junxiao Bi
2015-11-19 5:11 ` Eric Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=564C4A3B.3060605@suse.com \
--to=zren@suse.com \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.