[PATCH RESEND] arm: dts: berlin2q: remove duplicated interrupt-parent

[sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)]

On 16.11.2015 11:46, Jisheng Zhang wrote:
> The default interrupt-parent has been set in the upper layer, apb at e80000
> and apb at fc0000 for example. So if the interrupt-parent isn't changed, we
> don't need to set it again. This patch removes the dumplicated
> interrupt-parent settings.
> 
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>

Applied to berlin64/dt.

Thanks!

> ---
>  arch/arm/boot/dts/berlin2q.dtsi | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 8ea177f..155430a 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -309,7 +309,6 @@
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  				reg = <0x1400 0x100>;
> -				interrupt-parent = <&aic>;
>  				interrupts = <4>;
>  				clocks = <&chip_clk CLKID_CFG>;
>  				pinctrl-0 = <&twsi0_pmux>;
> @@ -322,7 +321,6 @@
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  				reg = <0x1800 0x100>;
> -				interrupt-parent = <&aic>;
>  				interrupts = <5>;
>  				clocks = <&chip_clk CLKID_CFG>;
>  				pinctrl-0 = <&twsi1_pmux>;
> @@ -528,7 +526,6 @@
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  				reg = <0x7000 0x100>;
> -				interrupt-parent = <&sic>;
>  				interrupts = <6>;
>  				clocks = <&refclk>;
>  				pinctrl-0 = <&twsi2_pmux>;
> @@ -541,7 +538,6 @@
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  				reg = <0x8000 0x100>;
> -				interrupt-parent = <&sic>;
>  				interrupts = <7>;
>  				clocks = <&refclk>;
>  				pinctrl-0 = <&twsi3_pmux>;
> @@ -552,7 +548,6 @@
>  			uart0: uart at 9000 {
>  				compatible = "snps,dw-apb-uart";
>  				reg = <0x9000 0x100>;
> -				interrupt-parent = <&sic>;
>  				interrupts = <8>;
>  				clocks = <&refclk>;
>  				reg-shift = <2>;
> @@ -564,7 +559,6 @@
>  			uart1: uart at a000 {
>  				compatible = "snps,dw-apb-uart";
>  				reg = <0xa000 0x100>;
> -				interrupt-parent = <&sic>;
>  				interrupts = <9>;
>  				clocks = <&refclk>;
>  				reg-shift = <2>;
>