All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: niklas.soderlund@ragnatech.se, kieran.bingham@ideasonboard.com,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v4 5/6] media: rcar: rcar-csi2: Update V3M/E3 PHTW tables
Date: Tue, 06 Nov 2018 15:22:29 +0200	[thread overview]
Message-ID: <5650007.KMox73GGi6@avalon> (raw)
In-Reply-To: <1541501667-28817-6-git-send-email-jacopo+renesas@jmondi.org>

Hi Jacopo,

Thank you for the patch.

On Tuesday, 6 November 2018 12:54:26 EET Jacopo Mondi wrote:
> Update PHTW tables for V3M and E3 SoCs to the latest datasheet release
> (R-Car Series, 3rd Generation manual rev1.00 20181017).
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> 
> ---
> v1 -> v2:
> - Limit the PHTW table to 1125 MBps, according to Laurent's comment

Based on the assumption that the values haven't changed between v1 and v2,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/platform/rcar-vin/rcar-csi2.c | 62 ++++++++++++--------------
>  1 file changed, 31 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c
> b/drivers/media/platform/rcar-vin/rcar-csi2.c index 695686b..99f5b76 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -152,37 +152,37 @@ static const struct rcsi2_mbps_reg
> phtw_mbps_h3_v3h_m3n[] = { };
> 
>  static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
> -	{ .mbps =   80, .reg = 0x00 },
> -	{ .mbps =   90, .reg = 0x20 },
> -	{ .mbps =  100, .reg = 0x40 },
> -	{ .mbps =  110, .reg = 0x02 },
> -	{ .mbps =  130, .reg = 0x22 },
> -	{ .mbps =  140, .reg = 0x42 },
> -	{ .mbps =  150, .reg = 0x04 },
> -	{ .mbps =  170, .reg = 0x24 },
> -	{ .mbps =  180, .reg = 0x44 },
> -	{ .mbps =  200, .reg = 0x06 },
> -	{ .mbps =  220, .reg = 0x26 },
> -	{ .mbps =  240, .reg = 0x46 },
> -	{ .mbps =  250, .reg = 0x08 },
> -	{ .mbps =  270, .reg = 0x28 },
> -	{ .mbps =  300, .reg = 0x0a },
> -	{ .mbps =  330, .reg = 0x2a },
> -	{ .mbps =  360, .reg = 0x4a },
> -	{ .mbps =  400, .reg = 0x0c },
> -	{ .mbps =  450, .reg = 0x2c },
> -	{ .mbps =  500, .reg = 0x0e },
> -	{ .mbps =  550, .reg = 0x2e },
> -	{ .mbps =  600, .reg = 0x10 },
> -	{ .mbps =  650, .reg = 0x30 },
> -	{ .mbps =  700, .reg = 0x12 },
> -	{ .mbps =  750, .reg = 0x32 },
> -	{ .mbps =  800, .reg = 0x52 },
> -	{ .mbps =  850, .reg = 0x72 },
> -	{ .mbps =  900, .reg = 0x14 },
> -	{ .mbps =  950, .reg = 0x34 },
> -	{ .mbps = 1000, .reg = 0x54 },
> -	{ .mbps = 1050, .reg = 0x74 },
> +	{ .mbps =   89, .reg = 0x00 },
> +	{ .mbps =   99, .reg = 0x20 },
> +	{ .mbps =  109, .reg = 0x40 },
> +	{ .mbps =  129, .reg = 0x02 },
> +	{ .mbps =  139, .reg = 0x22 },
> +	{ .mbps =  149, .reg = 0x42 },
> +	{ .mbps =  169, .reg = 0x04 },
> +	{ .mbps =  179, .reg = 0x24 },
> +	{ .mbps =  199, .reg = 0x44 },
> +	{ .mbps =  219, .reg = 0x06 },
> +	{ .mbps =  239, .reg = 0x26 },
> +	{ .mbps =  249, .reg = 0x46 },
> +	{ .mbps =  269, .reg = 0x08 },
> +	{ .mbps =  299, .reg = 0x28 },
> +	{ .mbps =  329, .reg = 0x0a },
> +	{ .mbps =  359, .reg = 0x2a },
> +	{ .mbps =  399, .reg = 0x4a },
> +	{ .mbps =  449, .reg = 0x0c },
> +	{ .mbps =  499, .reg = 0x2c },
> +	{ .mbps =  549, .reg = 0x0e },
> +	{ .mbps =  599, .reg = 0x2e },
> +	{ .mbps =  649, .reg = 0x10 },
> +	{ .mbps =  699, .reg = 0x30 },
> +	{ .mbps =  749, .reg = 0x12 },
> +	{ .mbps =  799, .reg = 0x32 },
> +	{ .mbps =  849, .reg = 0x52 },
> +	{ .mbps =  899, .reg = 0x72 },
> +	{ .mbps =  949, .reg = 0x14 },
> +	{ .mbps =  999, .reg = 0x34 },
> +	{ .mbps = 1049, .reg = 0x54 },
> +	{ .mbps = 1099, .reg = 0x74 },
>  	{ .mbps = 1125, .reg = 0x16 },
>  	{ /* sentinel */ },
>  };


-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2018-11-06 13:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-06 10:54 [PATCH v4 0/6] media: rcar-vin: Add support for R-Car E3 Jacopo Mondi
2018-11-06 10:54 ` [PATCH v4 1/6] media: dt-bindings: rcar-vin: Add R8A77990 support Jacopo Mondi
2018-11-06 10:54 ` [PATCH v4 2/6] media: rcar-vin: Add support for R-Car R8A77990 Jacopo Mondi
2018-11-06 10:54 ` [PATCH v4 3/6] media: dt-bindings: rcar-csi2: Add R8A77990 Jacopo Mondi
2018-11-06 10:54 ` [PATCH v4 4/6] media: rcar-csi2: Add R8A77990 support Jacopo Mondi
2018-11-06 10:54 ` [PATCH v4 5/6] media: rcar: rcar-csi2: Update V3M/E3 PHTW tables Jacopo Mondi
2018-11-06 13:22   ` Laurent Pinchart [this message]
2018-11-06 10:54 ` [PATCH v4 6/6] media: rcar-csi2: Handle per-SoC number of channels Jacopo Mondi
2018-11-14 19:56   ` Niklas Söderlund
2018-11-14 19:56     ` Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5650007.KMox73GGi6@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.