diff for duplicates of <5652CE10.1020808@redhat.com> diff --git a/a/1.txt b/N1/1.txt index 0ebfd59..4a6c25b 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -4,7 +4,7 @@ On 22-11-15 20:59, Maxime Ripard wrote: > Hi, > > On Fri, Nov 20, 2015 at 08:11:53PM +0100, Hans de Goede wrote: ->> From: Jelle de Jong <jelledejong@powercraft.nl> +>> From: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org> >> >> The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such >> on the PCB, is meant as a A20 based router board. As such the board comes @@ -13,8 +13,8 @@ On 22-11-15 20:59, Maxime Ripard wrote: >> 2.5 inch harddisk. To complete its networking features it has a >> Realtek RTL8192CU for WiFi 802.11 b/g/n. >> ->> Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> ->> Signed-off-by: Hans de Goede <hdegoede@redhat.com> +>> Signed-off-by: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org> +>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 297 ++++++++++++++++++++++++++++++ @@ -40,7 +40,7 @@ On 22-11-15 20:59, Maxime Ripard wrote: >> +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts >> @@ -0,0 +1,297 @@ >> +/* ->> + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl> +>> + * Copyright 2015 Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org> >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual @@ -175,7 +175,7 @@ the custom OPPs if you want and see how that works. >> + phy-supply = <®_gmac_3v3>; >> + status = "okay"; >> + ->> + phy1: ethernet-phy at 1 { +>> + phy1: ethernet-phy@1 { >> + reg = <1>; >> + }; >> +}; @@ -185,7 +185,7 @@ the custom OPPs if you want and see how that works. >> + pinctrl-0 = <&i2c0_pins_a>; >> + status = "okay"; >> + ->> + axp209: pmic at 34 { +>> + axp209: pmic@34 { >> + reg = <0x34>; >> + interrupt-parent = <&nmi_intc>; >> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; @@ -243,28 +243,28 @@ bus routed to some header pins. >> +}; >> + >> +&pio { ->> + usb0_id_detect_pin: usb0_id_detect_pin at 0 { +>> + usb0_id_detect_pin: usb0_id_detect_pin@0 { >> + allwinner,pins = "PH4"; >> + allwinner,function = "gpio_in"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; >> + }; >> + ->> + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin at 0 { +>> + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { >> + allwinner,pins = "PH10"; >> + allwinner,function = "gpio_in"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; >> + }; >> + ->> + gmac_power_pin_lamobo_r1: gmac_power_pin at 0 { +>> + gmac_power_pin_lamobo_r1: gmac_power_pin@0 { >> + allwinner,pins = "PH23"; >> + allwinner,function = "gpio_out"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + ->> + led_pins_lamobo_r1: led_pins at 0 { +>> + led_pins_lamobo_r1: led_pins@0 { >> + allwinner,pins = "PH24"; >> + allwinner,function = "gpio_out"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; diff --git a/a/content_digest b/N1/content_digest index a98aae0..85ba4ee 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,9 +1,14 @@ "ref\01448046713-13579-1-git-send-email-hdegoede@redhat.com\0" "ref\020151122195925.GR32142@lukather\0" - "From\0hdegoede@redhat.com (Hans de Goede)\0" - "Subject\0[linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for the lamobo-r1 board\0" + "From\0Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\0" + "Subject\0Re: Re: [PATCH] ARM: dts: sun7i: Add dts file for the lamobo-r1 board\0" "Date\0Mon, 23 Nov 2015 09:28:00 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Cc\0Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>" + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org + " Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>\0" "\00:1\0" "b\0" "Hi,\n" @@ -12,7 +17,7 @@ "> Hi,\n" ">\n" "> On Fri, Nov 20, 2015 at 08:11:53PM +0100, Hans de Goede wrote:\n" - ">> From: Jelle de Jong <jelledejong@powercraft.nl>\n" + ">> From: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>\n" ">>\n" ">> The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such\n" ">> on the PCB, is meant as a A20 based router board. As such the board comes\n" @@ -21,8 +26,8 @@ ">> 2.5 inch harddisk. To complete its networking features it has a\n" ">> Realtek RTL8192CU for WiFi 802.11 b/g/n.\n" ">>\n" - ">> Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl>\n" - ">> Signed-off-by: Hans de Goede <hdegoede@redhat.com>\n" + ">> Signed-off-by: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>\n" + ">> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n" ">> ---\n" ">> arch/arm/boot/dts/Makefile | 1 +\n" ">> arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 297 ++++++++++++++++++++++++++++++\n" @@ -48,7 +53,7 @@ ">> +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts\n" ">> @@ -0,0 +1,297 @@\n" ">> +/*\n" - ">> + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>\n" + ">> + * Copyright 2015 Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>\n" ">> + *\n" ">> + * This file is dual-licensed: you can use it either under the terms\n" ">> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -183,7 +188,7 @@ ">> +\tphy-supply = <®_gmac_3v3>;\n" ">> +\tstatus = \"okay\";\n" ">> +\n" - ">> +\tphy1: ethernet-phy at 1 {\n" + ">> +\tphy1: ethernet-phy@1 {\n" ">> +\t\treg = <1>;\n" ">> +\t};\n" ">> +};\n" @@ -193,7 +198,7 @@ ">> +\tpinctrl-0 = <&i2c0_pins_a>;\n" ">> +\tstatus = \"okay\";\n" ">> +\n" - ">> +\taxp209: pmic at 34 {\n" + ">> +\taxp209: pmic@34 {\n" ">> +\t\treg = <0x34>;\n" ">> +\t\tinterrupt-parent = <&nmi_intc>;\n" ">> +\t\tinterrupts = <0 IRQ_TYPE_LEVEL_LOW>;\n" @@ -251,28 +256,28 @@ ">> +};\n" ">> +\n" ">> +&pio {\n" - ">> +\tusb0_id_detect_pin: usb0_id_detect_pin at 0 {\n" + ">> +\tusb0_id_detect_pin: usb0_id_detect_pin@0 {\n" ">> +\t\tallwinner,pins = \"PH4\";\n" ">> +\t\tallwinner,function = \"gpio_in\";\n" ">> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" ">> +\t\tallwinner,pull = <SUN4I_PINCTRL_PULL_UP>;\n" ">> +\t};\n" ">> +\n" - ">> +\tmmc0_cd_pin_lamobo_r1: mmc0_cd_pin at 0 {\n" + ">> +\tmmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {\n" ">> +\t\tallwinner,pins = \"PH10\";\n" ">> +\t\tallwinner,function = \"gpio_in\";\n" ">> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" ">> +\t\tallwinner,pull = <SUN4I_PINCTRL_PULL_UP>;\n" ">> +\t};\n" ">> +\n" - ">> +\tgmac_power_pin_lamobo_r1: gmac_power_pin at 0 {\n" + ">> +\tgmac_power_pin_lamobo_r1: gmac_power_pin@0 {\n" ">> +\t\tallwinner,pins = \"PH23\";\n" ">> +\t\tallwinner,function = \"gpio_out\";\n" ">> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" ">> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" ">> +\t};\n" ">> +\n" - ">> +\tled_pins_lamobo_r1: led_pins at 0 {\n" + ">> +\tled_pins_lamobo_r1: led_pins@0 {\n" ">> +\t\tallwinner,pins = \"PH24\";\n" ">> +\t\tallwinner,function = \"gpio_out\";\n" ">> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" @@ -340,4 +345,4 @@ "\n" Hans -3c5990fbff65c4e9763f15d947ad3c7fb959b7df822c3033bbcb57b6bbf89f06 +fcbf310ed94efbf8abd7b8364ebb03497a6312a9c3aee990031df0896ec73b80
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.