From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6] arm: atmel: Add SAMA5D2 Xplained board
Date: Mon, 23 Nov 2015 17:28:45 +0100 [thread overview]
Message-ID: <56533EBD.10508@googlemail.com> (raw)
In-Reply-To: <1446170152-20774-1-git-send-email-wenyou.yang@atmel.com>
Hi Wenyou,
On 30.10.15 02:55, Wenyou Yang wrote:
> The board supports following features:
> - Boot media support: SD card/e.MMC/SPI flash,
> - Support LCD display (optional, disabled by default),
> - Support ethernet,
> - Support USB mass storage.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
I'll fix a few checkpatch warnings while applying
Andreas
> ---
> The patch is based on the following patches sent in mailing list.
> [PATCH] gpio: atmel: Add the PIO4 driver support
> [PATCH] arm: at91: Change the Chip ID registers' addresses
> [PATCH v4] mmc: atmel: Add atmel sdhci support
> [PATCH v3] arm: at91: clock: Add the generated clock support
>
> Changes in v6:
> 1./ change function invocation due to its declaration change,
> at91_enable_periph_generated_clk().
>
> Changes in v5:
> 1./ remove wrong pin config for USB hw init.
>
> Changes in v4:
> 1./ remove __weak attribute for has_lcdc() added in v3.
> 2./ remove unused goto err_exit.
>
> Changes in v3:
> 1./ change defines-->definitions for more clearly in asm/arch/sama5d2.h.
> 2./ remove unused cpu_is_sama5d2x() macros.
> 3./ fix spelling error "adress".
> 4./ add __weak attribute for has_lcdc().
> 5./ remove SPL configs.
>
> Changes in v2:
> 1./ re-order SAMA5D2 statements alphabetically.
> 2./ remove redundant "Unknown CPU type".
> 3./ rework sama5d2's macros.
> 4./ remove some #ifdef before functions.
> 5./ move CONFIG_CMD_SF to Kconfig.
> 6./ remove NAND macros from config file.
> 7./ CONFIG_BOOTCOMMAND for sf uses defines in at91-sama5_common.h.
>
> arch/arm/mach-at91/Kconfig | 5 +
> arch/arm/mach-at91/armv7/Makefile | 1 +
> arch/arm/mach-at91/armv7/sama5d2_devices.c | 59 +++++
> arch/arm/mach-at91/include/mach/at91_pmc.h | 9 +-
> arch/arm/mach-at91/include/mach/atmel_usba_udc.h | 3 +-
> arch/arm/mach-at91/include/mach/hardware.h | 2 +
> arch/arm/mach-at91/include/mach/sama5d2.h | 203 ++++++++++++++++
> board/atmel/sama5d2_xplained/Kconfig | 15 ++
> board/atmel/sama5d2_xplained/MAINTAINERS | 7 +
> board/atmel/sama5d2_xplained/Makefile | 8 +
> board/atmel/sama5d2_xplained/sama5d2_xplained.c | 284 ++++++++++++++++++++++
> configs/sama5d2_xplained_mmc_defconfig | 11 +
> configs/sama5d2_xplained_spiflash_defconfig | 11 +
> include/configs/sama5d2_xplained.h | 122 ++++++++++
> 14 files changed, 734 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm/mach-at91/armv7/sama5d2_devices.c
> create mode 100644 arch/arm/mach-at91/include/mach/sama5d2.h
> create mode 100644 board/atmel/sama5d2_xplained/Kconfig
> create mode 100644 board/atmel/sama5d2_xplained/MAINTAINERS
> create mode 100644 board/atmel/sama5d2_xplained/Makefile
> create mode 100644 board/atmel/sama5d2_xplained/sama5d2_xplained.c
> create mode 100644 configs/sama5d2_xplained_mmc_defconfig
> create mode 100644 configs/sama5d2_xplained_spiflash_defconfig
> create mode 100644 include/configs/sama5d2_xplained.h
next prev parent reply other threads:[~2015-11-23 16:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-30 1:55 [U-Boot] [PATCH v6] arm: atmel: Add SAMA5D2 Xplained board Wenyou Yang
2015-11-23 16:28 ` Andreas Bießmann [this message]
2015-11-24 1:30 ` Yang, Wenyou
2015-11-30 21:28 ` [U-Boot] [U-Boot,v6] " Andreas Bießmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56533EBD.10508@googlemail.com \
--to=andreas.devel@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.