From: Stephen Smalley <sds@tycho.nsa.gov>
To: "Ville Skyttä" <ville.skytta@iki.fi>, selinux@tycho.nsa.gov
Subject: Re: [PATCH] libselinux, policycoreutils: Man page warning fixes
Date: Tue, 24 Nov 2015 16:40:26 -0500 [thread overview]
Message-ID: <5654D94A.20008@tycho.nsa.gov> (raw)
In-Reply-To: <1446888056-15525-1-git-send-email-ville.skytta@iki.fi>
On 11/07/2015 04:20 AM, Ville Skyttä wrote:
> Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Thanks, applied.
> ---
> libselinux/man/man3/security_load_booleans.3 | 2 +-
> libselinux/man/man3/selinux_binary_policy_path.3 | 2 +-
> libselinux/man/man8/avcstat.8 | 2 +-
> libselinux/man/man8/booleans.8 | 2 +-
> libselinux/man/man8/getenforce.8 | 2 +-
> libselinux/man/man8/getsebool.8 | 2 +-
> libselinux/man/man8/matchpathcon.8 | 2 +-
> libselinux/man/man8/selinux.8 | 2 +-
> libselinux/man/man8/selinuxenabled.8 | 2 +-
> libselinux/man/man8/selinuxexeccon.8 | 2 +-
> libselinux/man/man8/setenforce.8 | 2 +-
> libselinux/man/man8/togglesebool.8 | 2 +-
> policycoreutils/semodule/semodule.8 | 4 ++--
> policycoreutils/semodule_package/semodule_package.8 | 2 +-
> policycoreutils/sepolicy/sepolicy-communicate.8 | 2 +-
> policycoreutils/setsebool/setsebool.8 | 2 +-
> 16 files changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/libselinux/man/man3/security_load_booleans.3 b/libselinux/man/man3/security_load_booleans.3
> index 3dc963d..3b0bbea 100644
> --- a/libselinux/man/man3/security_load_booleans.3
> +++ b/libselinux/man/man3/security_load_booleans.3
> @@ -56,7 +56,7 @@ commits all pending values for the booleans.
> Where not otherwise stated, functions described in this manual page return
> zero on success or \-1 on error.
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> .
> .SH "SEE ALSO"
> diff --git a/libselinux/man/man3/selinux_binary_policy_path.3 b/libselinux/man/man3/selinux_binary_policy_path.3
> index 503c52c..edaa3b8 100644
> --- a/libselinux/man/man3/selinux_binary_policy_path.3
> +++ b/libselinux/man/man3/selinux_binary_policy_path.3
> @@ -108,7 +108,7 @@ returns the defines tty types for newrole securettys.
> .BR selinux_booleans_path ()
> returns the initial policy boolean settings.
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> .
> .SH "SEE ALSO"
> diff --git a/libselinux/man/man8/avcstat.8 b/libselinux/man/man8/avcstat.8
> index 6251591..204687d 100644
> --- a/libselinux/man/man8/avcstat.8
> +++ b/libselinux/man/man8/avcstat.8
> @@ -27,7 +27,7 @@ Display the cumulative values.
> Specifies the location of the AVC statistics file, defaulting to
> .IR /selinux/avc/cache_stats .
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> The program was written by James Morris <jmorris@redhat.com>.
> .
> diff --git a/libselinux/man/man8/booleans.8 b/libselinux/man/man8/booleans.8
> index 9c4dbc3..d4ca9c4 100644
> --- a/libselinux/man/man8/booleans.8
> +++ b/libselinux/man/man8/booleans.8
> @@ -47,7 +47,7 @@ unless the
> .B \-P
> option is used to setsebool.
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> The SELinux conditional policy support was developed by Tresys Technology.
> .
> diff --git a/libselinux/man/man8/getenforce.8 b/libselinux/man/man8/getenforce.8
> index e0924d8..70b9921 100644
> --- a/libselinux/man/man8/getenforce.8
> +++ b/libselinux/man/man8/getenforce.8
> @@ -9,7 +9,7 @@ getenforce \- get the current mode of SELinux
> .B getenforce
> reports whether SELinux is enforcing, permissive, or disabled.
> .
> -.SH AUTHOR
> +.SH AUTHOR
> Dan Walsh, <dwalsh@redhat.com>
> .
> .SH "SEE ALSO"
> diff --git a/libselinux/man/man8/getsebool.8 b/libselinux/man/man8/getsebool.8
> index 6353a2a..d70bf1e 100644
> --- a/libselinux/man/man8/getsebool.8
> +++ b/libselinux/man/man8/getsebool.8
> @@ -27,7 +27,7 @@ their pending values as desired and then committing once.
> .B \-a
> Show all SELinux booleans.
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> The program was written by Tresys Technology.
> .
> diff --git a/libselinux/man/man8/matchpathcon.8 b/libselinux/man/man8/matchpathcon.8
> index 5d60789..50c0d39 100644
> --- a/libselinux/man/man8/matchpathcon.8
> +++ b/libselinux/man/man8/matchpathcon.8
> @@ -54,7 +54,7 @@ Use alternate policy root path
> .B \-V
> Verify file context on disk matches defaults
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> .
> .SH "SEE ALSO"
> diff --git a/libselinux/man/man8/selinux.8 b/libselinux/man/man8/selinux.8
> index 9e3bdc4..6f1034b 100644
> --- a/libselinux/man/man8/selinux.8
> +++ b/libselinux/man/man8/selinux.8
> @@ -77,7 +77,7 @@ also has this capability. The
> .BR restorecon / fixfiles
> commands are also available for relabeling files.
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> .
> .SH FILES
> diff --git a/libselinux/man/man8/selinuxenabled.8 b/libselinux/man/man8/selinuxenabled.8
> index ac20587..5cd7a62 100644
> --- a/libselinux/man/man8/selinuxenabled.8
> +++ b/libselinux/man/man8/selinuxenabled.8
> @@ -11,7 +11,7 @@ Indicates whether SELinux is enabled or disabled.
> .SH "EXIT STATUS"
> It exits with status 0 if SELinux is enabled and 1 if it is not enabled.
> .
> -.SH AUTHOR
> +.SH AUTHOR
> Dan Walsh, <dwalsh@redhat.com>
> .
> .SH "SEE ALSO"
> diff --git a/libselinux/man/man8/selinuxexeccon.8 b/libselinux/man/man8/selinuxexeccon.8
> index 30c20ed..194740d 100644
> --- a/libselinux/man/man8/selinuxexeccon.8
> +++ b/libselinux/man/man8/selinuxexeccon.8
> @@ -20,7 +20,7 @@ staff_u:staff_r:passwd_t:s0-s0:c0.c1023
> system_u:system_r:system_mail_t:s0
> .fi
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> .
> .SH "SEE ALSO"
> diff --git a/libselinux/man/man8/setenforce.8 b/libselinux/man/man8/setenforce.8
> index 8a24f1c..702041d 100644
> --- a/libselinux/man/man8/setenforce.8
> +++ b/libselinux/man/man8/setenforce.8
> @@ -22,7 +22,7 @@ to put SELinux in permissive mode.
> If SELinux is disabled and you want to enable it, or SELinux is enabled and you want to disable it, please see
> .BR selinux (8).
> .
> -.SH AUTHOR
> +.SH AUTHOR
> Dan Walsh, <dwalsh@redhat.com>
> .
> .SH "SEE ALSO"
> diff --git a/libselinux/man/man8/togglesebool.8 b/libselinux/man/man8/togglesebool.8
> index 598dc94..8f775ca 100644
> --- a/libselinux/man/man8/togglesebool.8
> +++ b/libselinux/man/man8/togglesebool.8
> @@ -12,7 +12,7 @@ flips the current value of a list of booleans. If the value is currently a 1,
> then it will be changed to a 0 and vice versa. Only the "in memory" values are
> changed; the boot-time settings are unaffected.
> .
> -.SH AUTHOR
> +.SH AUTHOR
> This man page was written by Steve Grubb <sgrubb@redhat.com>
> .
> .SH "SEE ALSO"
> diff --git a/policycoreutils/semodule/semodule.8 b/policycoreutils/semodule/semodule.8
> index 9cd04e7..6db390c 100644
> --- a/policycoreutils/semodule/semodule.8
> +++ b/policycoreutils/semodule/semodule.8
> @@ -20,7 +20,7 @@ by semodule_package. Conventionally, these files have a .pp suffix
> .B \-R, \-\-reload
> force a reload of policy
> .TP
> -.B \-B, \-\-build
> +.B \-B, \-\-build
> force a rebuild of policy (also reloads unless \-n is used)
> .TP
> .B \-D, \-\-disable_dontaudit
> @@ -63,7 +63,7 @@ enable module
> .B \-d,\-\-disable=MODULE_NAME
> disable module
> .TP
> -.B \-s,\-\-store
> +.B \-s,\-\-store
> name of the store to operate on
> .TP
> .B \-n,\-\-noreload,\-N
> diff --git a/policycoreutils/semodule_package/semodule_package.8 b/policycoreutils/semodule_package/semodule_package.8
> index 563d526..9697cc5 100644
> --- a/policycoreutils/semodule_package/semodule_package.8
> +++ b/policycoreutils/semodule_package/semodule_package.8
> @@ -37,7 +37,7 @@ user_extra file to be included in the package.
> .B \-m \-\-module <Module file>
> Policy module file to be included in the package.
> .TP
> -.B \-f \-\-fc <File context file>
> +.B \-f \-\-fc <File context file>
> File contexts file for the module (optional).
> .TP
> .B \-n \-\-nc <netfilter context file>
> diff --git a/policycoreutils/sepolicy/sepolicy-communicate.8 b/policycoreutils/sepolicy/sepolicy-communicate.8
> index 764fd35..050aa47 100644
> --- a/policycoreutils/sepolicy/sepolicy-communicate.8
> +++ b/policycoreutils/sepolicy/sepolicy-communicate.8
> @@ -13,7 +13,7 @@ The default command looks to see if there are any file types that the source dom
>
> .SH "OPTIONS"
> .TP
> -.I \-c, \-\-class
> +.I \-c, \-\-class
> Specify the SELinux class which the source domain will attempt to communicate with the target domain. (Default file)
> .TP
> .I \-h, \-\-help
> diff --git a/policycoreutils/setsebool/setsebool.8 b/policycoreutils/setsebool/setsebool.8
> index 916a58c..52936f5 100644
> --- a/policycoreutils/setsebool/setsebool.8
> +++ b/policycoreutils/setsebool/setsebool.8
> @@ -23,7 +23,7 @@ If the \-N option is given, the policy on disk is not reloaded into the kernel.
> If the \-V option is given, verbose error messages will be printed from semanage libraries.
>
>
> -.SH AUTHOR
> +.SH AUTHOR
> This manual page was written by Dan Walsh <dwalsh@redhat.com>.
> The program was written by Tresys Technology.
>
>
prev parent reply other threads:[~2015-11-24 21:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-07 9:20 [PATCH] libselinux, policycoreutils: Man page warning fixes Ville Skyttä
2015-11-24 21:40 ` Stephen Smalley [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5654D94A.20008@tycho.nsa.gov \
--to=sds@tycho.nsa.gov \
--cc=selinux@tycho.nsa.gov \
--cc=ville.skytta@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.