Re: [v5 0/7] add support SATA for BMIPS_GENERIC

[Florian Fainelli <f.fainelli@gmail.com>]

On 18/11/15 18:41, Jaedon Shin wrote:
> Hi all,
> 
> This patch series add support SATA for BMIPS_GENERIC.
> 
> Changes in v5:
> - uses brcm_sata_readreg and brcm_sata_writereg for HOST_CAP_NCQ overriding
> - pull out already applied patches for device tree entries
> - add "Tested-by:" and "Acked-by:" tags

And now also tested on 7435 and 7429 and worked just fine, I plan on
submitting DTSes updates or additions for these chips a little later on.

Jaedon, can you address Brian's and Kishon's feedback so we can get
these patches included in their respective trees?

Thanks again!

> 
> Changes in v4:
> - remove unused properties from bcm{7425,7342,7362}.dtsi
> 
> Changes in v3:
> - fix typo quirk instead of quick
> - disable NCQ before initialzing SATA controller endianness
> - fix misnomer controlling phy interface
> - remove brcm,broken-ncq and brcm,broken-phy properties from devicetree
> - use compatible string for quirks
> - use list for compatible strings
> - add "Acked-by:" tags
> 
> Changes in v2:
> - adds quirk for ncq
> - adds quirk for phy interface control
> - remove unused definitions in ahci_brcmstb
> - combines compatible string
> 
> Jaedon Shin (7):
>   ata: ahci_brcmstb: add support MIPS-based platforms
>   ata: ahci_brcmstb: add quirk for broken ncq
>   ata: ahci_brcmstb: add quirk for different phy
>   ata: ahci_brcmstb: remove unused definitions
>   phy: phy_brcmstb_sata: remove duplicate definitions
>   phy: phy_brcmstb_sata: add data for phy version
>   phy: phy_brcmstb_sata: add support MIPS-based platforms
> 
>  .../devicetree/bindings/ata/brcm,sata-brcmstb.txt  |  4 +-
>  .../bindings/phy/brcm,brcmstb-sata-phy.txt         |  1 +
>  drivers/ata/Kconfig                                |  2 +-
>  drivers/ata/ahci_brcmstb.c                         | 58 +++++++++++++++++++++-
>  drivers/phy/Kconfig                                |  4 +-
>  drivers/phy/phy-brcmstb-sata.c                     | 47 ++++++++++++++----
>  6 files changed, 100 insertions(+), 16 deletions(-)
> 
> --
> 2.6.3
> 


-- 
Florian