[v5 0/7] add support SATA for BMIPS_GENERIC

[v5 0/7] add support SATA for BMIPS_GENERIC

[Jaedon Shin]

Hi all,

This patch series add support SATA for BMIPS_GENERIC.

Changes in v5:
- uses brcm_sata_readreg and brcm_sata_writereg for HOST_CAP_NCQ overriding
- pull out already applied patches for device tree entries
- add "Tested-by:" and "Acked-by:" tags

Changes in v4:
- remove unused properties from bcm{7425,7342,7362}.dtsi

Changes in v3:
- fix typo quirk instead of quick
- disable NCQ before initialzing SATA controller endianness
- fix misnomer controlling phy interface
- remove brcm,broken-ncq and brcm,broken-phy properties from devicetree
- use compatible string for quirks
- use list for compatible strings
- add "Acked-by:" tags

Changes in v2:
- adds quirk for ncq
- adds quirk for phy interface control
- remove unused definitions in ahci_brcmstb
- combines compatible string

Jaedon Shin (7):
  ata: ahci_brcmstb: add support MIPS-based platforms
  ata: ahci_brcmstb: add quirk for broken ncq
  ata: ahci_brcmstb: add quirk for different phy
  ata: ahci_brcmstb: remove unused definitions
  phy: phy_brcmstb_sata: remove duplicate definitions
  phy: phy_brcmstb_sata: add data for phy version
  phy: phy_brcmstb_sata: add support MIPS-based platforms

 .../devicetree/bindings/ata/brcm,sata-brcmstb.txt  |  4 +-
 .../bindings/phy/brcm,brcmstb-sata-phy.txt         |  1 +
 drivers/ata/Kconfig                                |  2 +-
 drivers/ata/ahci_brcmstb.c                         | 58 +++++++++++++++++++++-
 drivers/phy/Kconfig                                |  4 +-
 drivers/phy/phy-brcmstb-sata.c                     | 47 ++++++++++++++----
 6 files changed, 100 insertions(+), 16 deletions(-)

--
2.6.3

[v5 1/7] ata: ahci_brcmstb: add support MIPS-based platforms

[Jaedon Shin]

The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.

The BCM7425 is main chipset of MIPS-based 40nm class. The others have
same AHCI block. The compatible string may be use brcm,bcm7425-ahci.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
 Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt | 4 +++-
 drivers/ata/Kconfig                                         | 2 +-
 drivers/ata/ahci_brcmstb.c                                  | 1 +
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
index 20ac9bbfa1fd..60872838f1ad 100644
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible         : compatible list, may contain "brcm,bcm7445-ahci" and/or
+- compatible         : should be one or more of
+                       "brcm,bcm7425-ahci"
+                       "brcm,bcm7445-ahci"
                        "brcm,sata3-ahci"
 - reg                : register mappings for AHCI and SATA_TOP_CTRL
 - reg-names          : "ahci" and "top-ctrl"
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6aaa3f81755b..861643ea91b5 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -100,7 +100,7 @@ config SATA_AHCI_PLATFORM
 
 config AHCI_BRCMSTB
 	tristate "Broadcom STB AHCI SATA support"
-	depends on ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
 	help
 	  This option enables support for the AHCI SATA3 controller found on
 	  STB SoC's.
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index 14b7305d2ba0..73e3b0b2a3c2 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -300,6 +300,7 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id ahci_of_match[] = {
+	{.compatible = "brcm,bcm7425-ahci"},
 	{.compatible = "brcm,bcm7445-ahci"},
 	{},
 };
-- 
2.6.3

[v5 2/7] ata: ahci_brcmstb: add quirk for broken ncq

[Jaedon Shin]

Add quirk for broken ncq. Some chipsets (eg. BCM7349A0, BCM7445A0,
BCM7445B0, and all 40nm chipsets including BCM7425) need a workaround
disabling NCQ.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/ata/ahci_brcmstb.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index 73e3b0b2a3c2..3bf1cf6259d7 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -69,10 +69,15 @@
 	(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) |		\
 	(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
 
+enum brcm_ahci_quirks {
+	BRCM_AHCI_QUIRK_NONCQ		= BIT(0),
+};
+
 struct brcm_ahci_priv {
 	struct device *dev;
 	void __iomem *top_ctrl;
 	u32 port_mask;
+	u32 quirks;
 };
 
 static const struct ata_port_info ahci_brcm_port_info = {
@@ -202,6 +207,42 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
 	return impl;
 }
 
+static void brcm_sata_quirks(struct platform_device *pdev,
+			     struct brcm_ahci_priv *priv)
+{
+	if (priv->quirks & BRCM_AHCI_QUIRK_NONCQ) {
+		void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
+		void __iomem *ahci;
+		struct resource *res;
+		u32 reg;
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						   "ahci");
+		ahci = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(ahci))
+			return;
+
+		reg = brcm_sata_readreg(ctrl);
+		reg |= OVERRIDE_HWINIT;
+		brcm_sata_writereg(reg, ctrl);
+
+		/* Clear out the NCQ bit so the AHCI driver will not issue
+		 * FPDMA/NCQ commands.
+		 */
+		reg = brcm_sata_readreg(ahci + HOST_CAP);
+		reg &= ~HOST_CAP_NCQ;
+		brcm_sata_writereg(reg, ahci + HOST_CAP);
+
+		reg = brcm_sata_readreg(ctrl);
+		reg &= ~OVERRIDE_HWINIT;
+		brcm_sata_writereg(reg, ctrl);
+
+		devm_iounmap(&pdev->dev, ahci);
+		devm_release_mem_region(&pdev->dev, res->start,
+					resource_size(res));
+	}
+}
+
 static void brcm_sata_init(struct brcm_ahci_priv *priv)
 {
 	/* Configure endianness */
@@ -256,6 +297,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->top_ctrl))
 		return PTR_ERR(priv->top_ctrl);
 
+	if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci"))
+		priv->quirks |= BRCM_AHCI_QUIRK_NONCQ;
+
+	brcm_sata_quirks(pdev, priv);
+
 	brcm_sata_init(priv);
 
 	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
-- 
2.6.3

Re: [v5 2/7] ata: ahci_brcmstb: add quirk for broken ncq

[Brian Norris]

On Thu, Nov 19, 2015 at 11:41:14AM +0900, Jaedon Shin wrote:
> Add quirk for broken ncq. Some chipsets (eg. BCM7349A0, BCM7445A0,
> BCM7445B0, and all 40nm chipsets including BCM7425) need a workaround
> disabling NCQ.
> 
> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
> Acked-by: Brian Norris <computersforpeace@gmail.com>
> ---
>  drivers/ata/ahci_brcmstb.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
> index 73e3b0b2a3c2..3bf1cf6259d7 100644
> --- a/drivers/ata/ahci_brcmstb.c
> +++ b/drivers/ata/ahci_brcmstb.c
> @@ -69,10 +69,15 @@
>  	(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) |		\
>  	(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
>  
> +enum brcm_ahci_quirks {
> +	BRCM_AHCI_QUIRK_NONCQ		= BIT(0),
> +};
> +
>  struct brcm_ahci_priv {
>  	struct device *dev;
>  	void __iomem *top_ctrl;
>  	u32 port_mask;
> +	u32 quirks;
>  };
>  
>  static const struct ata_port_info ahci_brcm_port_info = {
> @@ -202,6 +207,42 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
>  	return impl;
>  }
>  
> +static void brcm_sata_quirks(struct platform_device *pdev,
> +			     struct brcm_ahci_priv *priv)
> +{
> +	if (priv->quirks & BRCM_AHCI_QUIRK_NONCQ) {
> +		void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
> +		void __iomem *ahci;
> +		struct resource *res;
> +		u32 reg;
> +
> +		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						   "ahci");
> +		ahci = devm_ioremap_resource(&pdev->dev, res);
> +		if (IS_ERR(ahci))
> +			return;
> +
> +		reg = brcm_sata_readreg(ctrl);
> +		reg |= OVERRIDE_HWINIT;
> +		brcm_sata_writereg(reg, ctrl);
> +
> +		/* Clear out the NCQ bit so the AHCI driver will not issue
> +		 * FPDMA/NCQ commands.
> +		 */
> +		reg = brcm_sata_readreg(ahci + HOST_CAP);
> +		reg &= ~HOST_CAP_NCQ;
> +		brcm_sata_writereg(reg, ahci + HOST_CAP);
> +
> +		reg = brcm_sata_readreg(ctrl);
> +		reg &= ~OVERRIDE_HWINIT;
> +		brcm_sata_writereg(reg, ctrl);
> +
> +		devm_iounmap(&pdev->dev, ahci);
> +		devm_release_mem_region(&pdev->dev, res->start,
> +					resource_size(res));

You missed Tejun's suggestion:

http://article.gmane.org/gmane.linux.ide/60602

This can all be killed and replaced with 

	hpriv->flags |= AHCI_HFLAG_NO_NCQ;

And you need to move brcm_sata_quirks() after
ahci_platform_get_resources(). (It makes sense there anyway, despite
whatever the original Broadcom BSP did.)

Brian

> +	}
> +}
> +
>  static void brcm_sata_init(struct brcm_ahci_priv *priv)
>  {
>  	/* Configure endianness */
> @@ -256,6 +297,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
>  	if (IS_ERR(priv->top_ctrl))
>  		return PTR_ERR(priv->top_ctrl);
>  
> +	if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci"))
> +		priv->quirks |= BRCM_AHCI_QUIRK_NONCQ;
> +
> +	brcm_sata_quirks(pdev, priv);
> +
>  	brcm_sata_init(priv);
>  
>  	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
> -- 
> 2.6.3
> 

[v5 3/7] ata: ahci_brcmstb: add quirk for different phy

[Jaedon Shin]

Add quirk for phy interface of MIPS-based chipsets. The ARM-based
chipsets have four phy interface control registers and each port has two
registers but the MIPS-based chipsets have three. There are no
information and documentation.

The Broadcom strict-ahci based BSP of legacy version did not control
these registers.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/ata/ahci_brcmstb.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index 3bf1cf6259d7..b7cdfc8fabb7 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -71,6 +71,7 @@
 
 enum brcm_ahci_quirks {
 	BRCM_AHCI_QUIRK_NONCQ		= BIT(0),
+	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(1),
 };
 
 struct brcm_ahci_priv {
@@ -119,6 +120,9 @@ static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
 	void __iomem *p;
 	u32 reg;
 
+	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+		return;
+
 	/* clear PHY_DEFAULT_POWER_STATE */
 	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
 	reg = brcm_sata_readreg(p);
@@ -148,6 +152,9 @@ static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
 	void __iomem *p;
 	u32 reg;
 
+	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+		return;
+
 	/* power-off the PHY digital logic */
 	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
 	reg = brcm_sata_readreg(p);
@@ -297,8 +304,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->top_ctrl))
 		return PTR_ERR(priv->top_ctrl);
 
-	if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci"))
+	if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
 		priv->quirks |= BRCM_AHCI_QUIRK_NONCQ;
+		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+	}
 
 	brcm_sata_quirks(pdev, priv);
 
-- 
2.6.3

[v5 4/7] ata: ahci_brcmstb: remove unused definitions

[Jaedon Shin]

Remove unused definitions, and this is to avoid confusion with MIPS-based
chipsets.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/ata/ahci_brcmstb.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index b7cdfc8fabb7..0af6d6dd6a36 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -52,8 +52,6 @@
   #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET		BIT(14)
  #define SATA_TOP_CTRL_PHY_OFFS				0x8
  #define SATA_TOP_MAX_PHYS				2
-#define SATA_TOP_CTRL_SATA_TP_OUT			0x1c
-#define SATA_TOP_CTRL_CLIENT_INIT_CTRL			0x20
 
 /* On big-endian MIPS, buses are reversed to big endian, so switch them back */
 #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
-- 
2.6.3

[v5 5/7] phy: phy_brcmstb_sata: remove duplicate definitions

[Jaedon Shin]

Remove duplicate definitions.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/phy/phy-brcmstb-sata.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index 8a2cb16a1937..0be55dafe9ea 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -26,8 +26,6 @@
 
 #define SATA_MDIO_BANK_OFFSET				0x23c
 #define SATA_MDIO_REG_OFFSET(ofs)			((ofs) * 4)
-#define SATA_MDIO_REG_SPACE_SIZE			0x1000
-#define SATA_MDIO_REG_LENGTH				0x1f00
 
 #define MAX_PORTS					2
 
-- 
2.6.3

[v5 6/7] phy: phy_brcmstb_sata: add data for phy version

[Jaedon Shin]

Add data of device for phy version. and 28nm version is default.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/phy/phy-brcmstb-sata.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index 0be55dafe9ea..5de394f589c8 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -30,7 +30,11 @@
 #define MAX_PORTS					2
 
 /* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_SPACE_SIZE			0x1000
+#define SATA_MDIO_REG_28NM_SPACE_SIZE			0x1000
+
+enum brcm_sata_phy_version {
+	BRCM_SATA_PHY_28NM,
+};
 
 struct brcm_sata_port {
 	int portnum;
@@ -42,6 +46,7 @@ struct brcm_sata_port {
 struct brcm_sata_phy {
 	struct device *dev;
 	void __iomem *phy_base;
+	enum brcm_sata_phy_version version;
 
 	struct brcm_sata_port phys[MAX_PORTS];
 };
@@ -64,8 +69,12 @@ enum sata_mdio_phy_regs_28nm {
 static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
 {
 	struct brcm_sata_phy *priv = port->phy_priv;
+	u32 offset;
 
-	return priv->phy_base + (port->portnum * SATA_MDIO_REG_SPACE_SIZE);
+	if (priv->version == BRCM_SATA_PHY_28NM)
+		offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
+
+	return priv->phy_base + (port->portnum * offset);
 }
 
 static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
@@ -126,7 +135,8 @@ static const struct phy_ops phy_ops_28nm = {
 };
 
 static const struct of_device_id brcm_sata_phy_of_match[] = {
-	{ .compatible	= "brcm,bcm7445-sata-phy" },
+	{ .compatible	= "brcm,bcm7445-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_28NM },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -135,6 +145,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *dn = dev->of_node, *child;
+	const struct of_device_id *of_id;
 	struct brcm_sata_phy *priv;
 	struct resource *res;
 	struct phy_provider *provider;
@@ -154,6 +165,12 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->phy_base))
 		return PTR_ERR(priv->phy_base);
 
+	of_id = of_match_node(brcm_sata_phy_of_match, dn);
+	if (of_id)
+		priv->version = (enum brcm_sata_phy_version)of_id->data;
+	else
+		priv->version = BRCM_SATA_PHY_28NM;
+
 	for_each_available_child_of_node(dn, child) {
 		unsigned int id;
 		struct brcm_sata_port *port;
-- 
2.6.3

[v5 7/7] phy: phy_brcmstb_sata: add support MIPS-based platforms

[Jaedon Shin]

The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.

The BCM7425 is main chipset of MIPS-based 40nm class. The others have
same PHY of AHCI block. The compatible string may use
brcm,bcm7425-sata-phy.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
 .../bindings/phy/brcm,brcmstb-sata-phy.txt         |  1 +
 drivers/phy/Kconfig                                |  4 ++--
 drivers/phy/phy-brcmstb-sata.c                     | 24 ++++++++++++++++------
 3 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
index 7f81ef90146a..d87ab7c127b8 100644
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible: should be one or more of
+     "brcm,bcm7425-sata-phy"
      "brcm,bcm7445-sata-phy"
      "brcm,phy-sata3"
 - address-cells: should be 1
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859dd035..c6f4798ed3af 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -373,11 +373,11 @@ config PHY_TUSB1210
 
 config PHY_BRCMSTB_SATA
 	tristate "Broadcom STB SATA PHY driver"
-	depends on ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
 	depends on OF
 	select GENERIC_PHY
 	help
-	  Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
+	  Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
 	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
 
 config PHY_CYGNUS_PCIE
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index 5de394f589c8..c8243581f196 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -32,8 +32,14 @@
 /* Register offset between PHYs in PCB space */
 #define SATA_MDIO_REG_28NM_SPACE_SIZE			0x1000
 
+/* The older SATA PHY registers duplicated per port registers within the map,
+ * rather than having a separate map per port.
+ */
+#define SATA_MDIO_REG_40NM_SPACE_SIZE			0x10
+
 enum brcm_sata_phy_version {
 	BRCM_SATA_PHY_28NM,
+	BRCM_SATA_PHY_40NM,
 };
 
 struct brcm_sata_port {
@@ -51,7 +57,7 @@ struct brcm_sata_phy {
 	struct brcm_sata_port phys[MAX_PORTS];
 };
 
-enum sata_mdio_phy_regs_28nm {
+enum sata_mdio_phy_regs {
 	PLL_REG_BANK_0				= 0x50,
 	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
 
@@ -69,10 +75,14 @@ enum sata_mdio_phy_regs_28nm {
 static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
 {
 	struct brcm_sata_phy *priv = port->phy_priv;
-	u32 offset;
+	u32 offset = 0;
 
 	if (priv->version == BRCM_SATA_PHY_28NM)
 		offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
+	else if (priv->version == BRCM_SATA_PHY_40NM)
+		offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
+	else
+		dev_err(priv->dev, "should not happen\n");
 
 	return priv->phy_base + (port->portnum * offset);
 }
@@ -93,7 +103,7 @@ static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
 #define FMAX_VAL_DEFAULT	0x3df
 #define FMAX_VAL_SSC		0x83
 
-static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
+static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
 {
 	void __iomem *base = brcm_sata_phy_base(port);
 	struct brcm_sata_phy *priv = port->phy_priv;
@@ -124,12 +134,12 @@ static int brcm_sata_phy_init(struct phy *phy)
 {
 	struct brcm_sata_port *port = phy_get_drvdata(phy);
 
-	brcm_sata_cfg_ssc_28nm(port);
+	brcm_sata_cfg_ssc(port);
 
 	return 0;
 }
 
-static const struct phy_ops phy_ops_28nm = {
+static const struct phy_ops phy_ops = {
 	.init		= brcm_sata_phy_init,
 	.owner		= THIS_MODULE,
 };
@@ -137,6 +147,8 @@ static const struct phy_ops phy_ops_28nm = {
 static const struct of_device_id brcm_sata_phy_of_match[] = {
 	{ .compatible	= "brcm,bcm7445-sata-phy",
 	  .data = (void *)BRCM_SATA_PHY_28NM },
+	{ .compatible	= "brcm,bcm7425-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_40NM },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -193,7 +205,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 		port = &priv->phys[id];
 		port->portnum = id;
 		port->phy_priv = priv;
-		port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
+		port->phy = devm_phy_create(dev, child, &phy_ops);
 		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
 		if (IS_ERR(port->phy)) {
 			dev_err(dev, "failed to create PHY\n");
-- 
2.6.3

Re: [v5 7/7] phy: phy_brcmstb_sata: add support MIPS-based platforms

[Kishon Vijay Abraham I]

Hi,

On Thursday 19 November 2015 08:11 AM, Jaedon Shin wrote:
> The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
> block for AHCI SATA3.
> 
> The BCM7425 is main chipset of MIPS-based 40nm class. The others have
> same PHY of AHCI block. The compatible string may use
> brcm,bcm7425-sata-phy.
> 
> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
> Acked-by: Brian Norris <computersforpeace@gmail.com>
> ---
>  .../bindings/phy/brcm,brcmstb-sata-phy.txt         |  1 +
>  drivers/phy/Kconfig                                |  4 ++--
>  drivers/phy/phy-brcmstb-sata.c                     | 24 ++++++++++++++++------
>  3 files changed, 21 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
> index 7f81ef90146a..d87ab7c127b8 100644
> --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
> @@ -2,6 +2,7 @@
>  
>  Required properties:
>  - compatible: should be one or more of
> +     "brcm,bcm7425-sata-phy"
>       "brcm,bcm7445-sata-phy"
>       "brcm,phy-sata3"
>  - address-cells: should be 1
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 7eb5859dd035..c6f4798ed3af 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -373,11 +373,11 @@ config PHY_TUSB1210
>  
>  config PHY_BRCMSTB_SATA
>  	tristate "Broadcom STB SATA PHY driver"
> -	depends on ARCH_BRCMSTB
> +	depends on ARCH_BRCMSTB || BMIPS_GENERIC
>  	depends on OF
>  	select GENERIC_PHY
>  	help
> -	  Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
> +	  Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
>  	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
>  
>  config PHY_CYGNUS_PCIE
> diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
> index 5de394f589c8..c8243581f196 100644
> --- a/drivers/phy/phy-brcmstb-sata.c
> +++ b/drivers/phy/phy-brcmstb-sata.c
> @@ -32,8 +32,14 @@
>  /* Register offset between PHYs in PCB space */
>  #define SATA_MDIO_REG_28NM_SPACE_SIZE			0x1000
>  
> +/* The older SATA PHY registers duplicated per port registers within the map,
> + * rather than having a separate map per port.
> + */
> +#define SATA_MDIO_REG_40NM_SPACE_SIZE			0x10
> +
>  enum brcm_sata_phy_version {
>  	BRCM_SATA_PHY_28NM,
> +	BRCM_SATA_PHY_40NM,
>  };
>  
>  struct brcm_sata_port {
> @@ -51,7 +57,7 @@ struct brcm_sata_phy {
>  	struct brcm_sata_port phys[MAX_PORTS];
>  };
>  
> -enum sata_mdio_phy_regs_28nm {
> +enum sata_mdio_phy_regs {
>  	PLL_REG_BANK_0				= 0x50,
>  	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
>  
> @@ -69,10 +75,14 @@ enum sata_mdio_phy_regs_28nm {
>  static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
>  {
>  	struct brcm_sata_phy *priv = port->phy_priv;
> -	u32 offset;
> +	u32 offset = 0;
>  
>  	if (priv->version == BRCM_SATA_PHY_28NM)
>  		offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
> +	else if (priv->version == BRCM_SATA_PHY_40NM)
> +		offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
> +	else
> +		dev_err(priv->dev, "should not happen\n");

"invalid phy version" here?

Thanks
Kishon

Re: [v5 0/7] add support SATA for BMIPS_GENERIC

[Florian Fainelli]

On 18/11/15 18:41, Jaedon Shin wrote:
> Hi all,
> 
> This patch series add support SATA for BMIPS_GENERIC.
> 
> Changes in v5:
> - uses brcm_sata_readreg and brcm_sata_writereg for HOST_CAP_NCQ overriding
> - pull out already applied patches for device tree entries
> - add "Tested-by:" and "Acked-by:" tags

And now also tested on 7435 and 7429 and worked just fine, I plan on
submitting DTSes updates or additions for these chips a little later on.

Jaedon, can you address Brian's and Kishon's feedback so we can get
these patches included in their respective trees?

Thanks again!

> 
> Changes in v4:
> - remove unused properties from bcm{7425,7342,7362}.dtsi
> 
> Changes in v3:
> - fix typo quirk instead of quick
> - disable NCQ before initialzing SATA controller endianness
> - fix misnomer controlling phy interface
> - remove brcm,broken-ncq and brcm,broken-phy properties from devicetree
> - use compatible string for quirks
> - use list for compatible strings
> - add "Acked-by:" tags
> 
> Changes in v2:
> - adds quirk for ncq
> - adds quirk for phy interface control
> - remove unused definitions in ahci_brcmstb
> - combines compatible string
> 
> Jaedon Shin (7):
>   ata: ahci_brcmstb: add support MIPS-based platforms
>   ata: ahci_brcmstb: add quirk for broken ncq
>   ata: ahci_brcmstb: add quirk for different phy
>   ata: ahci_brcmstb: remove unused definitions
>   phy: phy_brcmstb_sata: remove duplicate definitions
>   phy: phy_brcmstb_sata: add data for phy version
>   phy: phy_brcmstb_sata: add support MIPS-based platforms
> 
>  .../devicetree/bindings/ata/brcm,sata-brcmstb.txt  |  4 +-
>  .../bindings/phy/brcm,brcmstb-sata-phy.txt         |  1 +
>  drivers/ata/Kconfig                                |  2 +-
>  drivers/ata/ahci_brcmstb.c                         | 58 +++++++++++++++++++++-
>  drivers/phy/Kconfig                                |  4 +-
>  drivers/phy/phy-brcmstb-sata.c                     | 47 ++++++++++++++----
>  6 files changed, 100 insertions(+), 16 deletions(-)
> 
> --
> 2.6.3
> 


-- 
Florian

Re: [v5 0/7] add support SATA for BMIPS_GENERIC

[Jaedon Shin]

On Nov 25, 2015, at 8:51 AM, Florian Fainelli <f.fainelli@gmail.com> wrote:
> 
> On 18/11/15 18:41, Jaedon Shin wrote:
>> Hi all,
>> 
>> This patch series add support SATA for BMIPS_GENERIC.
>> 
>> Changes in v5:
>> - uses brcm_sata_readreg and brcm_sata_writereg for HOST_CAP_NCQ overriding
>> - pull out already applied patches for device tree entries
>> - add "Tested-by:" and "Acked-by:" tags
> 
> And now also tested on 7435 and 7429 and worked just fine, I plan on
> submitting DTSes updates or additions for these chips a little later on.
> 
> Jaedon, can you address Brian's and Kishon's feedback so we can get
> these patches included in their respective trees?
> 
> Thanks again!
> 

Sorry too late, and I will resubmit patches in tomorrow including Tejun's, 
Brian's and Kishon's feedbacks.

Thanks,
Jaedon

>> 
>> Changes in v4:
>> - remove unused properties from bcm{7425,7342,7362}.dtsi
>> 
>> Changes in v3:
>> - fix typo quirk instead of quick
>> - disable NCQ before initialzing SATA controller endianness
>> - fix misnomer controlling phy interface
>> - remove brcm,broken-ncq and brcm,broken-phy properties from devicetree
>> - use compatible string for quirks
>> - use list for compatible strings
>> - add "Acked-by:" tags
>> 
>> Changes in v2:
>> - adds quirk for ncq
>> - adds quirk for phy interface control
>> - remove unused definitions in ahci_brcmstb
>> - combines compatible string
>> 
>> Jaedon Shin (7):
>>  ata: ahci_brcmstb: add support MIPS-based platforms
>>  ata: ahci_brcmstb: add quirk for broken ncq
>>  ata: ahci_brcmstb: add quirk for different phy
>>  ata: ahci_brcmstb: remove unused definitions
>>  phy: phy_brcmstb_sata: remove duplicate definitions
>>  phy: phy_brcmstb_sata: add data for phy version
>>  phy: phy_brcmstb_sata: add support MIPS-based platforms
>> 
>> .../devicetree/bindings/ata/brcm,sata-brcmstb.txt  |  4 +-
>> .../bindings/phy/brcm,brcmstb-sata-phy.txt         |  1 +
>> drivers/ata/Kconfig                                |  2 +-
>> drivers/ata/ahci_brcmstb.c                         | 58 +++++++++++++++++++++-
>> drivers/phy/Kconfig                                |  4 +-
>> drivers/phy/phy-brcmstb-sata.c                     | 47 ++++++++++++++----
>> 6 files changed, 100 insertions(+), 16 deletions(-)
>> 
>> --
>> 2.6.3
>> 
> 
> 
> -- 
> Florian