All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/4] mx6: clock: Modify GPMI clock to support mx6sx
Date: Wed, 25 Nov 2015 11:40:20 +0100	[thread overview]
Message-ID: <56559014.6000405@denx.de> (raw)
In-Reply-To: <8624FC902C662B4D9D77440AF5EA66252C5AF26C@temmail01.mytem.ch>

Hi Peter,

On 24/11/2015 15:38, B?rtsch Peter wrote:
> Hello Stefano,
> 
>  
> 
> I have seen , that my patch already exist :o but not active in master
> branch.
> 
> Follow patch is the original from Ye.Le

If you take a patch from someone else, you cannot change author.

Patch was ok, but it was part of a series where some changes were
requested. Anyway, patch is orthogonal to the other ones. I pick it up,
of course the one from Ye.

Best regards,
Stefano Babic

> 
>  
> 
> Kind regards
> 
> Peter B?rtsch
> 
>  
> 
>  
> 
> On mx6sx, the CCM register bits for GPMI are different as other
> 
> mx6 platforms. Modify the GPMI clock function to support mx6sx.
> 
>  
> 
>  
> 
> Signed-off-by: Ye.Li <b37...@freescale.com>
> 
> ---
> 
> arch/arm/cpu/armv7/mx6/clock.c |   12 ++++++++++++
> 
> 1 files changed, 12 insertions(+), 0 deletions(-)
> 
>  
> 
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> 
> index fd57f22..ce7f0f7 100644
> 
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> 
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> 
> @@ -47,6 +47,17 @@ void setup_gpmi_io_clk(u32 cfg)
> 
>                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
> 
>                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
> 
> +#if defined(CONFIG_MX6SX)
> 
> +       clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
> 
> +
> 
> +       clrsetbits_le32(&imx_ccm->cs2cdr,
> 
> +                       MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
> 
> +                       MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
> 
> +                       MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK,
> 
> +                       cfg);
> 
> +
> 
> +       setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
> 
> +#else
> 
>         clrbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
> 
>         clrsetbits_le32(&imx_ccm->cs2cdr,
> 
> @@ -56,6 +67,7 @@ void setup_gpmi_io_clk(u32 cfg)
> 
>                         cfg);
> 
>         setbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
> 
> +#endif
> 
>         setbits_le32(&imx_ccm->CCGR4,
> 
>                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
> 
>                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
> 
> --
> 
>  
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

  reply	other threads:[~2015-11-25 10:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-24 14:38 [U-Boot] [PATCH 3/4] mx6: clock: Modify GPMI clock to support mx6sx Bärtsch Peter
2015-11-25 10:40 ` Stefano Babic [this message]
  -- strict thread matches above, loose matches on Subject: below --
2015-01-12  8:46 [U-Boot] [PATCH 1/4] mx6sx: pins: Enable SION for I2C3 iomux setting Ye.Li
2015-01-12  8:46 ` [U-Boot] [PATCH 3/4] mx6: clock: Modify GPMI clock to support mx6sx Ye.Li
2015-02-10 10:26   ` Stefano Babic
2015-02-11  3:14     ` Li Ye-B37916
2015-02-11 12:48       ` Stefano Babic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56559014.6000405@denx.de \
    --to=sbabic@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.