[U-Boot] [PATCH] arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit definitions

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hello Marek,

On 11/26/2015 02:08 PM, Marek Vasut wrote:
> The following patch changed the PFUZE100 swbst register bit definitions
> and broke PMIC configuration on multiple boards, at least on the novena
> and gw_ventana. This patch fixes it.
>
> commit 8fa46350a4c7dca7710362f6c871098557b934ad
> Author: Peng Fan <Peng.Fan@freescale.com>
> Date:   Fri Aug 7 16:43:45 2015 +0800
>
>      power: regulator: add pfuze100 support
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Peng Fan <Peng.Fan@freescale.com>
> Cc: Przemyslaw Marczak <p.marczak@samsung.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Tim Harvey <tharvey@gateworks.com>
> Cc: Vagrant Cascadian <vagrant@aikidev.net>
> ---
>   board/gateworks/gw_ventana/common.c | 2 +-
>   board/kosagi/novena/novena.c        | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
> index d406c83..a20190e 100644
> --- a/board/gateworks/gw_ventana/common.c
> +++ b/board/gateworks/gw_ventana/common.c
> @@ -806,7 +806,7 @@ void setup_pmic(void)
>   			/* Set SWBST to 5.0V and enable */
>   			pmic_reg_read(p, PFUZE100_SWBSTCON1, &reg);
>   			reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
> -			reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
> +			reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
>   			pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
>   		}
>   	}
> diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c
> index babba85..b3159d3 100644
> --- a/board/kosagi/novena/novena.c
> +++ b/board/kosagi/novena/novena.c
> @@ -216,7 +216,7 @@ int power_init_board(void)
>   	/* Set SWBST to 5.0V and enable (for USB) */
>   	pmic_reg_read(p, PFUZE100_SWBSTCON1, &reg);
>   	reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
> -	reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
> +	reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
>   	pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
>
>   	return 0;
>

Thanks for fixing :)

Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com