From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] arm: socfpga: Remove fsloadcmd from environment
Date: Fri, 27 Nov 2015 04:18:01 +0100 [thread overview]
Message-ID: <5657CB69.2020406@denx.de> (raw)
In-Reply-To: <1448591271-2165-1-git-send-email-clsee@altera.com>
On 27.11.2015 03:27, Chin Liang See wrote:
> Remove fsloadcmd / ext2load as we are using load command
> which use the corresponding latest file system command.
>
> Signed-off-by: Chin Liang See <clsee@altera.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux@gmail.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> ---
> include/configs/socfpga_arria5_socdk.h | 1 -
> include/configs/socfpga_cyclone5_socdk.h | 1 -
> include/configs/socfpga_de0_nano_soc.h | 1 -
> include/configs/socfpga_sockit.h | 1 -
> include/configs/socfpga_socrates.h | 1 -
> 5 files changed, 5 deletions(-)
>
> diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h
> index 0506336..9337a58 100644
> --- a/include/configs/socfpga_arria5_socdk.h
> +++ b/include/configs/socfpga_arria5_socdk.h
> @@ -81,7 +81,6 @@
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> "fdtimagesize=0x7000\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h
> index d7369ee..3b2cfb0 100644
> --- a/include/configs/socfpga_cyclone5_socdk.h
> +++ b/include/configs/socfpga_cyclone5_socdk.h
> @@ -81,7 +81,6 @@
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> "fdtimagesize=0x7000\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h
> index b371a9b..16e146c 100644
> --- a/include/configs/socfpga_de0_nano_soc.h
> +++ b/include/configs/socfpga_de0_nano_soc.h
> @@ -74,7 +74,6 @@
> "bootimage=zImage\0" \
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h
> index d26f53d..5bcee05 100644
> --- a/include/configs/socfpga_sockit.h
> +++ b/include/configs/socfpga_sockit.h
> @@ -79,7 +79,6 @@
> "bootimage=zImage\0" \
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> diff --git a/include/configs/socfpga_socrates.h b/include/configs/socfpga_socrates.h
> index 6331251..16a2a86 100644
> --- a/include/configs/socfpga_socrates.h
> +++ b/include/configs/socfpga_socrates.h
> @@ -75,7 +75,6 @@
> "bootimage=zImage\0" \
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
next prev parent reply other threads:[~2015-11-27 3:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-27 2:27 [U-Boot] [PATCH] arm: socfpga: Remove fsloadcmd from environment Chin Liang See
2015-11-27 3:18 ` Stefan Roese [this message]
2015-11-27 10:35 ` Marek Vasut
2015-11-27 12:10 ` Chin Liang See
2015-11-27 12:14 ` Marek Vasut
2015-11-27 12:18 ` Chin Liang See
2015-11-27 12:52 ` Marek Vasut
2015-11-27 13:09 ` Chin Liang See
2015-11-27 13:16 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5657CB69.2020406@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.