[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky <chzigotzky@xenosoft.de>]

FYI

On 30 November 2015 at 10:48 AM, Christian Zigotzky wrote:
> Hi Denis,
>
> Thank you for your answer. Sorry because of my description.
>
> Yes, the driver probe function finds the device.
>
> With kernel 4.4-rc3:
>
> dmesg | grep -i eth0
>
> [ 2.297473] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
>
> dhclient eth0
>
> RTNETLINK answers: Cannot allocate memory
>
> With kernel 4.1.13:
>
> dmesg | grep -i eth0
>
> [ 2.328115] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
> [ 37.130466] eth0: Link is up at 100 Mbps, full duplex.
>
> Cheers,
>
> Christian
>
> On 30 November 2015 at 09:37 AM, Denis Kirjanov wrote:
>> On 11/29/15, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
>>> Hi All,
>>>
>>> Does the ethernet interface on your Electra, Chitra, Nemo, and Athena
>>> board work with the release candidates of the kernel 4.4? Unfortunately
>>> the P.A. Semi ethernet doesn't work on our Nemo boards with the release
>>> candidates of the kernel 4.4. We have set the following entries in the
>>> kernel config:
>>>
>>> CONFIG_NET_VENDOR_PASEMI=y
>>> CONFIG_PASEMI_MAC=y
>>>
>>> Could you please test the P.A. Semi ethernet on your P.A. Semi boards?
>> It's not clear from your descriptions what is not working. Does the
>> driver probe function find  a device? Does the interface show up in
>> the kernel? Can it send/receive packets?
>>
>> Also please CC netdev.
>>
>> Thanks.
>>
>>> Thanks in advance,
>>>
>>> Christian
>>> _______________________________________________
>>> Linuxppc-dev mailing list
>>> Linuxppc-dev@lists.ozlabs.org
>>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>