All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcel Apfelbaum <marcel@redhat.com>
To: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>,
	"Michael S. Tsirkin" <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v3 for-2.5] virtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize method
Date: Wed, 2 Dec 2015 19:56:37 +0200	[thread overview]
Message-ID: <565F30D5.7080205@redhat.com> (raw)
In-Reply-To: <1449078547-8557-1-git-send-email-shmulik.ladkani@ravellosystems.com>

On 12/02/2015 07:49 PM, Shmulik Ladkani wrote:
> In 1811e64 'hw/virtio: Add PCIe capability to virtio devices', the
> QEMU_PCI_CAP_EXPRESS capability was added to virtio's pci_dev, within
> 'virtio_pci_realize' - the pci device object realization method.
>
> This occurs to late, as 'pci_qdev_realize' (DeviceClass.realize of
> TYPE_PCI_DEVICE) has already been called, without knowing that the
> device instance is indeed an "express" instance, thus allocating
> insufficient pci config space.
>
> As a result, device may crash upon attempt to write to the PCIE config
> space.
>
> Fix, by arming the QEMU_PCI_CAP_EXPRESS capability early in virtio-pci's
> own DeviceClass realize method.
>
> This also makes code cleaner, as 'virtio_pci_realize' may now access the
> 'pci_is_express' predicate when needed.
>
> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
> ---
>
> Since v2: Negate QEMU_PCI_CAP_EXPRESS capability if not an express
>            endpoint, as suggested by Michael S. Tsirkin
> Since v1: Naming change, as suggested by Marcel Apfelbaum
>
>   hw/virtio/virtio-pci.c | 30 +++++++++++++++++++++++++-----
>   hw/virtio/virtio-pci.h |  1 +
>   2 files changed, 26 insertions(+), 5 deletions(-)
>
> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> index dd485629da..94667e6256 100644
> --- a/hw/virtio/virtio-pci.c
> +++ b/hw/virtio/virtio-pci.c
> @@ -1814,13 +1814,10 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp)
>
>       address_space_init(&proxy->modern_as, &proxy->modern_cfg, "virtio-pci-cfg-as");
>
> -    if (!(proxy->flags & VIRTIO_PCI_FLAG_DISABLE_PCIE)
> -        && !(proxy->flags & VIRTIO_PCI_FLAG_DISABLE_MODERN)
> -        && pci_bus_is_express(pci_dev->bus)
> -        && !pci_bus_is_root(pci_dev->bus)) {
> +    if (pci_is_express(pci_dev) && pci_bus_is_express(pci_dev->bus) &&
> +        !pci_bus_is_root(pci_dev->bus)) {
>           int pos;
>
> -        pci_dev->cap_present |= QEMU_PCI_CAP_EXPRESS;
>           pos = pcie_endpoint_cap_init(pci_dev, 0);
>           assert(pos > 0);
>
> @@ -1832,6 +1829,12 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp)
>            * PCI Power Management Interface Specification.
>            */
>           pci_set_word(pci_dev->config + pos + PCI_PM_PMC, 0x3);
> +    } else {
> +        /*
> +         * make future invocations of pci_is_express() return false
> +         * and pci_config_size() return PCI_CONFIG_SPACE_SIZE.
> +         */
> +        pci_dev->cap_present &= ~QEMU_PCI_CAP_EXPRESS;
>       }
>
>       virtio_pci_bus_new(&proxy->bus, sizeof(proxy->bus), proxy);
> @@ -1879,10 +1882,25 @@ static Property virtio_pci_properties[] = {
>       DEFINE_PROP_END_OF_LIST(),
>   };
>
> +static void virtio_pci_dc_realize(DeviceState *qdev, Error **errp)
> +{
> +    VirtioPCIClass *vpciklass = VIRTIO_PCI_GET_CLASS(qdev);
> +    VirtIOPCIProxy *proxy = VIRTIO_PCI(qdev);
> +    PCIDevice *pci_dev = &proxy->pci_dev;
> +
> +    if (!(proxy->flags & VIRTIO_PCI_FLAG_DISABLE_PCIE) &&
> +        !(proxy->flags & VIRTIO_PCI_FLAG_DISABLE_MODERN)) {
> +        pci_dev->cap_present |= QEMU_PCI_CAP_EXPRESS;
> +    }
> +
> +    vpciklass->parent_dc_realize(qdev, errp);
> +}
> +
>   static void virtio_pci_class_init(ObjectClass *klass, void *data)
>   {
>       DeviceClass *dc = DEVICE_CLASS(klass);
>       PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
> +    VirtioPCIClass *vpciklass = VIRTIO_PCI_CLASS(klass);
>
>       dc->props = virtio_pci_properties;
>       k->realize = virtio_pci_realize;
> @@ -1890,6 +1908,8 @@ static void virtio_pci_class_init(ObjectClass *klass, void *data)
>       k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
>       k->revision = VIRTIO_PCI_ABI_VERSION;
>       k->class_id = PCI_CLASS_OTHERS;
> +    vpciklass->parent_dc_realize = dc->realize;
> +    dc->realize = virtio_pci_dc_realize;
>       dc->reset = virtio_pci_reset;
>   }
>
> diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
> index ffb74bb908..a104ff2072 100644
> --- a/hw/virtio/virtio-pci.h
> +++ b/hw/virtio/virtio-pci.h
> @@ -105,6 +105,7 @@ typedef struct {
>
>   typedef struct VirtioPCIClass {
>       PCIDeviceClass parent_class;
> +    DeviceRealize parent_dc_realize;
>       void (*realize)(VirtIOPCIProxy *vpci_dev, Error **errp);
>   } VirtioPCIClass;
>
>

Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>

I just finished to prepare the same patch (with the same change), and since is
exactly the same my tests hold:

Tested-by: Marcel Apfelbaum <marcel@redhat.com>


Thanks,
Marcel

      reply	other threads:[~2015-12-02 17:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-02 17:49 [Qemu-devel] [PATCH v3 for-2.5] virtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize method Shmulik Ladkani
2015-12-02 17:56 ` Marcel Apfelbaum [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=565F30D5.7080205@redhat.com \
    --to=marcel@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=shmulik.ladkani@ravellosystems.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.