* [PATCH v4 0/7] ARM: dts: Add Advantech board support
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Akshay Bhat
This series aims to add Advantech BA-16 module (iMX6 based) and GE board support.
This series has been tested against linux-next tag next-20151127.
Modifications:
v3->v4:
- Remove simple-bus for regulators as suggested by Lucas Stash
- Use simple-panel instead of display-timings as suggested by Lucas Stash
- Add epson RTC node
- Reorder nodes alphabetically
History:
--------
[v1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/381872.html
[v2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-November/383276.html
[v3]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-November/384202.html
Akshay Bhat (5):
of: Add vendor prefix for Advantech Corporation
of: Add vendor prefix for General Electric Company
ARM: dts: imx: Add support for Advantech/GE B450v3
ARM: dts: imx: Add support for Advantech/GE B650v3
ARM: dts: imx: Add support for Advantech/GE B850v3
Justin Waters (2):
ARM: dts: imx: Add Advantech BA-16 Qseven module
ARM: dts: imx: Add support for Advantech/GE Bx50v3
.../devicetree/bindings/vendor-prefixes.txt | 2 +
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/imx6q-b450v3.dts | 84 +++
arch/arm/boot/dts/imx6q-b650v3.dts | 84 +++
arch/arm/boot/dts/imx6q-b850v3.dts | 127 +++++
arch/arm/boot/dts/imx6q-ba16.dtsi | 586 +++++++++++++++++++++
arch/arm/boot/dts/imx6q-bx50v3.dtsi | 207 ++++++++
7 files changed, 1093 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-b450v3.dts
create mode 100644 arch/arm/boot/dts/imx6q-b650v3.dts
create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts
create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi
create mode 100644 arch/arm/boot/dts/imx6q-bx50v3.dtsi
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 1/7] of: Add vendor prefix for Advantech Corporation
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds vendor prefix for Advantech Corporation.
Website: http://www.advantech.com/
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 62ff22f..c51bf7c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -10,6 +10,7 @@ ad Avionic Design GmbH
adapteva Adapteva, Inc.
adh AD Holdings Plc.
adi Analog Devices, Inc.
+advantech Advantech Corporation
aeroflexgaisler Aeroflex Gaisler AB
al Annapurna Labs
allwinner Allwinner Technology Co., Ltd.
--
2.6.3
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 1/7] of: Add vendor prefix for Advantech Corporation
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Akshay Bhat
This patch adds vendor prefix for Advantech Corporation.
Website: http://www.advantech.com/
Signed-off-by: Akshay Bhat <akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 62ff22f..c51bf7c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -10,6 +10,7 @@ ad Avionic Design GmbH
adapteva Adapteva, Inc.
adh AD Holdings Plc.
adi Analog Devices, Inc.
+advantech Advantech Corporation
aeroflexgaisler Aeroflex Gaisler AB
al Annapurna Labs
allwinner Allwinner Technology Co., Ltd.
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 2/7] of: Add vendor prefix for General Electric Company
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds vendor prefix for General Electric Company
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index c51bf7c..f1cc839 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -88,6 +88,7 @@ fcs Fairchild Semiconductor
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
fsl Freescale Semiconductor
+ge General Electric Company
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
geniatech Geniatech, Inc.
--
2.6.3
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 2/7] of: Add vendor prefix for General Electric Company
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Akshay Bhat
This patch adds vendor prefix for General Electric Company
Signed-off-by: Akshay Bhat <akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index c51bf7c..f1cc839 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -88,6 +88,7 @@ fcs Fairchild Semiconductor
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
fsl Freescale Semiconductor
+ge General Electric Company
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
geniatech Geniatech, Inc.
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 3/7] ARM: dts: imx: Add Advantech BA-16 Qseven module
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Justin Waters <justin.waters@timesys.com>
Add support for Advantech BA-16 module based on iMX6D processor
http://www2.advantech.com/products/medical_computing_system/dms-ba16/mod_64aa1566-169c-483d-97c8-c2c22c163fc3.aspx
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
---
arch/arm/boot/dts/imx6q-ba16.dtsi | 586 ++++++++++++++++++++++++++++++++++++++
1 file changed, 586 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
new file mode 100644
index 0000000..e5779a0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -0,0 +1,586 @@
+/*
+ * Support for imx6 based Advantech DMS-BA16 Qseven module
+ *
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ clocks {
+ clk24m: clk24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+
+ backlight_lvds: backlight {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_display>;
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100 101 102 103 104 105 106 107 108 109
+ 110 111 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127 128 129
+ 130 131 132 133 134 135 136 137 138 139
+ 140 141 142 143 144 145 146 147 148 149
+ 150 151 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167 168 169
+ 170 171 172 173 174 175 176 177 178 179
+ 180 181 182 183 184 185 186 187 188 189
+ 190 191 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207 208 209
+ 210 211 212 213 214 215 216 217 218 219
+ 220 221 222 223 224 225 226 227 228 229
+ 230 231 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247 248 249
+ 250 251 252 253 254 255>;
+ default-brightness-level = <255>;
+ enable-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_1p8v: regulator at 1 {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator at 2 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_lvds: regulator at 3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lvds_ppen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator at 4 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_h1_vbus: regulator at 5 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: n25q032 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0xC0000>;
+ };
+ partition at C0000 {
+ label = "env";
+ reg = <0xC0000 0x10000>;
+ };
+ partition at D0000 {
+ label = "spare";
+ reg = <0xD0000 0x130000>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ pmic at 58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ vdd_bcore1: bcore1 {
+ regulator-min-microvolt = <1420000>;
+ regulator-max-microvolt = <1420000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bcore2: bcore2 {
+ regulator-min-microvolt = <1420000>;
+ regulator-max-microvolt = <1420000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bpro: bpro {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bmem: bmem {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bio: bio {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bperi: bperi {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_ldo1: ldo1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1860000>;
+ };
+
+ vdd_ldo2: ldo2 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1860000>;
+ };
+
+ vdd_ldo3: ldo3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3440000>;
+ };
+
+ vdd_ldo4: ldo4 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3440000>;
+ };
+
+ vdd_ldo5: ldo5 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo6: ldo6 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo7: ldo7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo8: ldo8 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo9: ldo9 {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo10: ldo10 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo11: ldo11 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ rtc at 32 {
+ compatible = "epson,rx8010";
+ reg = <0x32>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-ba16 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 /* GPIO0 */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 /* GPIO1 */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* GPIO2 */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 /* GPIO3 */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x80000000 /* GPIO4 */
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 /* GPIO5 */
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* GPIO6 */
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* GPIO7 */
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 /* CAM_PWDN */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAM_RST */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM CLK */
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x80000000 /* SUS_S3_OUT */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* RTC_INT */
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__WDOG1_B 0x80000000 /* Watchdog out */
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC Interrupt */
+ >;
+ };
+
+ pinctrl_usbhub: usbhubgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x80000000 /* HUB_RESET */
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIe Reset */
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* PCIe Wake */
+ >;
+ };
+
+ pinctrl_display: dispgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* BLEN_OUT */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* LVDS_PPEN_OUT */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 /* uSDHC4 CD */
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 /* uSDHC4 SDIO PWR */
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 /* uSDHC4 SDIO WP */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000 /* uSDHC4 SDIO LED */
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000 /* SPI1 CS */
+ >;
+ };
+
+ pinctrl_ecspi5: ecspi5rp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
+ MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
+ MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* uSDHC2 CD */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_reset: usdhc3grp-reset {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
+ >;
+ };
+
+ pinctrl_audmux: audmux {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
+ MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
+ >;
+ };
+
+ pinctrl_enet: pinctrl_enet {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* FEC Reset */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* AR8033 Interrupt */
+ >;
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-master";
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhub>;
+ vbus-supply = <®_usb_h1_vbus>;
+ reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
+ bus-width = <8>;
+ vmmc-supply = <&vdd_bperi>;
+ vqmmc-supply = <&vdd_bio>;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+};
--
2.6.3
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v4 3/7] ARM: dts: imx: Add Advantech BA-16 Qseven module
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Akshay Bhat
From: Justin Waters <justin.waters-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
Add support for Advantech BA-16 module based on iMX6D processor
http://www2.advantech.com/products/medical_computing_system/dms-ba16/mod_64aa1566-169c-483d-97c8-c2c22c163fc3.aspx
Signed-off-by: Akshay Bhat <akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/imx6q-ba16.dtsi | 586 ++++++++++++++++++++++++++++++++++++++
1 file changed, 586 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
new file mode 100644
index 0000000..e5779a0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -0,0 +1,586 @@
+/*
+ * Support for imx6 based Advantech DMS-BA16 Qseven module
+ *
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ clocks {
+ clk24m: clk24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+
+ backlight_lvds: backlight {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_display>;
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100 101 102 103 104 105 106 107 108 109
+ 110 111 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127 128 129
+ 130 131 132 133 134 135 136 137 138 139
+ 140 141 142 143 144 145 146 147 148 149
+ 150 151 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167 168 169
+ 170 171 172 173 174 175 176 177 178 179
+ 180 181 182 183 184 185 186 187 188 189
+ 190 191 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207 208 209
+ 210 211 212 213 214 215 216 217 218 219
+ 220 221 222 223 224 225 226 227 228 229
+ 230 231 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247 248 249
+ 250 251 252 253 254 255>;
+ default-brightness-level = <255>;
+ enable-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_1p8v: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_lvds: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lvds_ppen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_h1_vbus: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: n25q032@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0xC0000>;
+ };
+ partition@C0000 {
+ label = "env";
+ reg = <0xC0000 0x10000>;
+ };
+ partition@D0000 {
+ label = "spare";
+ reg = <0xD0000 0x130000>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ vdd_bcore1: bcore1 {
+ regulator-min-microvolt = <1420000>;
+ regulator-max-microvolt = <1420000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bcore2: bcore2 {
+ regulator-min-microvolt = <1420000>;
+ regulator-max-microvolt = <1420000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bpro: bpro {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bmem: bmem {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bio: bio {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_bperi: bperi {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_ldo1: ldo1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1860000>;
+ };
+
+ vdd_ldo2: ldo2 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1860000>;
+ };
+
+ vdd_ldo3: ldo3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3440000>;
+ };
+
+ vdd_ldo4: ldo4 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3440000>;
+ };
+
+ vdd_ldo5: ldo5 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo6: ldo6 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo7: ldo7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo8: ldo8 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo9: ldo9 {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo10: ldo10 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ vdd_ldo11: ldo11 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8010";
+ reg = <0x32>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-ba16 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 /* GPIO0 */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 /* GPIO1 */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* GPIO2 */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 /* GPIO3 */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x80000000 /* GPIO4 */
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 /* GPIO5 */
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* GPIO6 */
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* GPIO7 */
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 /* CAM_PWDN */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAM_RST */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM CLK */
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x80000000 /* SUS_S3_OUT */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* RTC_INT */
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__WDOG1_B 0x80000000 /* Watchdog out */
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC Interrupt */
+ >;
+ };
+
+ pinctrl_usbhub: usbhubgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x80000000 /* HUB_RESET */
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIe Reset */
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* PCIe Wake */
+ >;
+ };
+
+ pinctrl_display: dispgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* BLEN_OUT */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* LVDS_PPEN_OUT */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 /* uSDHC4 CD */
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 /* uSDHC4 SDIO PWR */
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 /* uSDHC4 SDIO WP */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000 /* uSDHC4 SDIO LED */
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000 /* SPI1 CS */
+ >;
+ };
+
+ pinctrl_ecspi5: ecspi5rp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
+ MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
+ MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* uSDHC2 CD */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_reset: usdhc3grp-reset {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
+ >;
+ };
+
+ pinctrl_audmux: audmux {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
+ MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
+ >;
+ };
+
+ pinctrl_enet: pinctrl_enet {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* FEC Reset */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* AR8033 Interrupt */
+ >;
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-master";
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhub>;
+ vbus-supply = <®_usb_h1_vbus>;
+ reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
+ bus-width = <8>;
+ vmmc-supply = <&vdd_bperi>;
+ vqmmc-supply = <&vdd_bio>;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+};
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v4 3/7] ARM: dts: imx: Add Advantech BA-16 Qseven module
@ 2015-12-02 19:36 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2015-12-02 19:36 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 02 December 2015 13:16:16 Akshay Bhat wrote:
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100 101 102 103 104 105 106 107 108 109
> + 110 111 112 113 114 115 116 117 118 119
> + 120 121 122 123 124 125 126 127 128 129
> + 130 131 132 133 134 135 136 137 138 139
> + 140 141 142 143 144 145 146 147 148 149
> + 150 151 152 153 154 155 156 157 158 159
> + 160 161 162 163 164 165 166 167 168 169
> + 170 171 172 173 174 175 176 177 178 179
> + 180 181 182 183 184 185 186 187 188 189
> + 190 191 192 193 194 195 196 197 198 199
> + 200 201 202 203 204 205 206 207 208 209
> + 210 211 212 213 214 215 216 217 218 219
> + 220 221 222 223 224 225 226 227 228 229
> + 230 231 232 233 234 235 236 237 238 239
> + 240 241 242 243 244 245 246 247 248 249
> + 250 251 252 253 254 255>;
>
That is a lot of brightness levels. Why do you need so many of them?
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 3/7] ARM: dts: imx: Add Advantech BA-16 Qseven module
@ 2015-12-02 19:36 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2015-12-02 19:36 UTC (permalink / raw)
To: Akshay Bhat
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ
On Wednesday 02 December 2015 13:16:16 Akshay Bhat wrote:
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100 101 102 103 104 105 106 107 108 109
> + 110 111 112 113 114 115 116 117 118 119
> + 120 121 122 123 124 125 126 127 128 129
> + 130 131 132 133 134 135 136 137 138 139
> + 140 141 142 143 144 145 146 147 148 149
> + 150 151 152 153 154 155 156 157 158 159
> + 160 161 162 163 164 165 166 167 168 169
> + 170 171 172 173 174 175 176 177 178 179
> + 180 181 182 183 184 185 186 187 188 189
> + 190 191 192 193 194 195 196 197 198 199
> + 200 201 202 203 204 205 206 207 208 209
> + 210 211 212 213 214 215 216 217 218 219
> + 220 221 222 223 224 225 226 227 228 229
> + 230 231 232 233 234 235 236 237 238 239
> + 240 241 242 243 244 245 246 247 248 249
> + 250 251 252 253 254 255>;
>
That is a lot of brightness levels. Why do you need so many of them?
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 3/7] ARM: dts: imx: Add Advantech BA-16 Qseven module
2015-12-02 19:36 ` Arnd Bergmann
@ 2015-12-02 20:53 ` Akshay Bhat
-1 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 20:53 UTC (permalink / raw)
To: linux-arm-kernel
On 12/02/2015 02:36 PM, Arnd Bergmann wrote:
> On Wednesday 02 December 2015 13:16:16 Akshay Bhat wrote:
>> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
>> + 10 11 12 13 14 15 16 17 18 19
>> + 20 21 22 23 24 25 26 27 28 29
>> + 30 31 32 33 34 35 36 37 38 39
>> + 40 41 42 43 44 45 46 47 48 49
>> + 50 51 52 53 54 55 56 57 58 59
>> + 60 61 62 63 64 65 66 67 68 69
>> + 70 71 72 73 74 75 76 77 78 79
>> + 80 81 82 83 84 85 86 87 88 89
>> + 90 91 92 93 94 95 96 97 98 99
>> + 100 101 102 103 104 105 106 107 108 109
>> + 110 111 112 113 114 115 116 117 118 119
>> + 120 121 122 123 124 125 126 127 128 129
>> + 130 131 132 133 134 135 136 137 138 139
>> + 140 141 142 143 144 145 146 147 148 149
>> + 150 151 152 153 154 155 156 157 158 159
>> + 160 161 162 163 164 165 166 167 168 169
>> + 170 171 172 173 174 175 176 177 178 179
>> + 180 181 182 183 184 185 186 187 188 189
>> + 190 191 192 193 194 195 196 197 198 199
>> + 200 201 202 203 204 205 206 207 208 209
>> + 210 211 212 213 214 215 216 217 218 219
>> + 220 221 222 223 224 225 226 227 228 229
>> + 230 231 232 233 234 235 236 237 238 239
>> + 240 241 242 243 244 245 246 247 248 249
>> + 250 251 252 253 254 255>;
>>
>
> That is a lot of brightness levels. Why do you need so many of them?
>
> Arnd
>
Hi Arnd,
The product allows for a fine grained selection of the LCD brightness
(analogy might be a laptop brightness slider), hence all possible levels
have been included.
Thanks,
Akshay
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 3/7] ARM: dts: imx: Add Advantech BA-16 Qseven module
@ 2015-12-02 20:53 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 20:53 UTC (permalink / raw)
To: Arnd Bergmann
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Martin Donnelly
On 12/02/2015 02:36 PM, Arnd Bergmann wrote:
> On Wednesday 02 December 2015 13:16:16 Akshay Bhat wrote:
>> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
>> + 10 11 12 13 14 15 16 17 18 19
>> + 20 21 22 23 24 25 26 27 28 29
>> + 30 31 32 33 34 35 36 37 38 39
>> + 40 41 42 43 44 45 46 47 48 49
>> + 50 51 52 53 54 55 56 57 58 59
>> + 60 61 62 63 64 65 66 67 68 69
>> + 70 71 72 73 74 75 76 77 78 79
>> + 80 81 82 83 84 85 86 87 88 89
>> + 90 91 92 93 94 95 96 97 98 99
>> + 100 101 102 103 104 105 106 107 108 109
>> + 110 111 112 113 114 115 116 117 118 119
>> + 120 121 122 123 124 125 126 127 128 129
>> + 130 131 132 133 134 135 136 137 138 139
>> + 140 141 142 143 144 145 146 147 148 149
>> + 150 151 152 153 154 155 156 157 158 159
>> + 160 161 162 163 164 165 166 167 168 169
>> + 170 171 172 173 174 175 176 177 178 179
>> + 180 181 182 183 184 185 186 187 188 189
>> + 190 191 192 193 194 195 196 197 198 199
>> + 200 201 202 203 204 205 206 207 208 209
>> + 210 211 212 213 214 215 216 217 218 219
>> + 220 221 222 223 224 225 226 227 228 229
>> + 230 231 232 233 234 235 236 237 238 239
>> + 240 241 242 243 244 245 246 247 248 249
>> + 250 251 252 253 254 255>;
>>
>
> That is a lot of brightness levels. Why do you need so many of them?
>
> Arnd
>
Hi Arnd,
The product allows for a fine grained selection of the LCD brightness
(analogy might be a laptop brightness slider), hence all possible levels
have been included.
Thanks,
Akshay
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 4/7] ARM: dts: imx: Add support for Advantech/GE Bx50v3
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Justin Waters <justin.waters@timesys.com>
Advantech has 3 carrier boards (B450v3, B650v3, B850v3) which use
the Advantech BA-16 module (based on iMX6D). This file has the
devicetree entries that are common to all 3 boards.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
---
arch/arm/boot/dts/imx6q-bx50v3.dtsi | 207 ++++++++++++++++++++++++++++++++++++
1 file changed, 207 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-bx50v3.dtsi
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
new file mode 100644
index 0000000..61bb9aa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -0,0 +1,207 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6q-ba16.dtsi"
+
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mclk: clock at 0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <22000000>;
+ };
+ };
+
+ reg_wl18xx_vmmc: regulator at 6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1807";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator at 7 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V_wlan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound {
+ compatible = "fsl,imx6q-ba16-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-ba16-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&ecspi5 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi5>;
+ status = "okay";
+
+ m25_eeprom: m25p80 at 0 {
+ compatible = "atmel,at25";
+ spi-max-frequency = <20000000>;
+ size = <0x8000>;
+ pagesize = <64>;
+ reg = <0>;
+ address-width = <16>;
+ };
+};
+
+&i2c1 {
+ pca9547: mux at 70 {
+ compatible = "nxp,pca9547";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mux_i2c3: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ ads7830: ads7830 at 48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ mma8453: mma8453 at 1c {
+ compatible = "fsl,mma8453";
+ reg = <0x1c>;
+ };
+ };
+
+ mux_i2c4: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ eeprom: eeprom at 50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ };
+
+ mpl3115: mpl3115 at 60 {
+ compatible = "fsl,mpl3115";
+ reg = <0x60>;
+ };
+ };
+
+ mux_i2c5: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+
+ mux_i2c6: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&mclk>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+ };
+
+ mux_i2c7: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ pca9539: pca9539 at 74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio2>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+
+ mux_i2c8: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ igb at 49 {
+ compatible = "intel,igb";
+ reg = <0x49>;
+ };
+
+ igb at 61 {
+ compatible = "intel,igb";
+ reg = <0x61>;
+ };
+ };
+
+ mux_i2c9: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+
+ mux_i2c10: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <4>;
+ vmmc-supply = <®_wl18xx_vmmc>;
+ no-1-8-v;
+ non-removable;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
+ cap-power-off-card;
+ max-frequency = <25000000>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore at 0 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
--
2.6.3
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v4 4/7] ARM: dts: imx: Add support for Advantech/GE Bx50v3
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Akshay Bhat
From: Justin Waters <justin.waters-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
Advantech has 3 carrier boards (B450v3, B650v3, B850v3) which use
the Advantech BA-16 module (based on iMX6D). This file has the
devicetree entries that are common to all 3 boards.
Signed-off-by: Akshay Bhat <akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/imx6q-bx50v3.dtsi | 207 ++++++++++++++++++++++++++++++++++++
1 file changed, 207 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-bx50v3.dtsi
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
new file mode 100644
index 0000000..61bb9aa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -0,0 +1,207 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6q-ba16.dtsi"
+
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mclk: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <22000000>;
+ };
+ };
+
+ reg_wl18xx_vmmc: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1807";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V_wlan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound {
+ compatible = "fsl,imx6q-ba16-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-ba16-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&ecspi5 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi5>;
+ status = "okay";
+
+ m25_eeprom: m25p80@0 {
+ compatible = "atmel,at25";
+ spi-max-frequency = <20000000>;
+ size = <0x8000>;
+ pagesize = <64>;
+ reg = <0>;
+ address-width = <16>;
+ };
+};
+
+&i2c1 {
+ pca9547: mux@70 {
+ compatible = "nxp,pca9547";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mux_i2c3: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ ads7830: ads7830@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ mma8453: mma8453@1c {
+ compatible = "fsl,mma8453";
+ reg = <0x1c>;
+ };
+ };
+
+ mux_i2c4: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ };
+
+ mpl3115: mpl3115@60 {
+ compatible = "fsl,mpl3115";
+ reg = <0x60>;
+ };
+ };
+
+ mux_i2c5: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+
+ mux_i2c6: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&mclk>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+ };
+
+ mux_i2c7: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ pca9539: pca9539@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio2>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+
+ mux_i2c8: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ igb@49 {
+ compatible = "intel,igb";
+ reg = <0x49>;
+ };
+
+ igb@61 {
+ compatible = "intel,igb";
+ reg = <0x61>;
+ };
+ };
+
+ mux_i2c9: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+
+ mux_i2c10: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <4>;
+ vmmc-supply = <®_wl18xx_vmmc>;
+ no-1-8-v;
+ non-removable;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
+ cap-power-off-card;
+ max-frequency = <25000000>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 5/7] ARM: dts: imx: Add support for Advantech/GE B450v3
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
Add support for Advantech/GE B450v3 board.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-b450v3.dts | 84 ++++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-b450v3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 760a737..219830f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -310,6 +310,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-wandboard-revb1.dtb \
imx6q-apf6dev.dtb \
imx6q-arm2.dtb \
+ imx6q-b450v3.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
new file mode 100644
index 0000000..ba1ec0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+ model = "Advantech MX6Q B450V3 QSeven Board";
+ compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ panel_lvds0 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel_lvds1 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+};
+
+&ldb {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ status = "okay";
+
+ lvds0: lvds-channel at 0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel at 1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
--
2.6.3
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v4 5/7] ARM: dts: imx: Add support for Advantech/GE B450v3
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Akshay Bhat
Add support for Advantech/GE B450v3 board.
Signed-off-by: Akshay Bhat <akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-b450v3.dts | 84 ++++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-b450v3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 760a737..219830f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -310,6 +310,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-wandboard-revb1.dtb \
imx6q-apf6dev.dtb \
imx6q-arm2.dtb \
+ imx6q-b450v3.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
new file mode 100644
index 0000000..ba1ec0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+ model = "Advantech MX6Q B450V3 QSeven Board";
+ compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ panel_lvds0 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel_lvds1 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+};
+
+&ldb {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 6/7] ARM: dts: imx: Add support for Advantech/GE B650v3
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
Add support for Advantech/GE B650v3 board.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-b650v3.dts | 84 ++++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-b650v3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 219830f..9cdff66 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -311,6 +311,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-apf6dev.dtb \
imx6q-arm2.dtb \
imx6q-b450v3.dtb \
+ imx6q-b650v3.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
new file mode 100644
index 0000000..cbe99fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+ model = "Advantech MX6Q B650V3 QSeven Board";
+ compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ panel_lvds0 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel_lvds1 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+};
+
+&ldb {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ status = "okay";
+
+ lvds0: lvds-channel at 0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel at 1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
--
2.6.3
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v4 6/7] ARM: dts: imx: Add support for Advantech/GE B650v3
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Akshay Bhat
Add support for Advantech/GE B650v3 board.
Signed-off-by: Akshay Bhat <akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-b650v3.dts | 84 ++++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-b650v3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 219830f..9cdff66 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -311,6 +311,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-apf6dev.dtb \
imx6q-arm2.dtb \
imx6q-b450v3.dtb \
+ imx6q-b650v3.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
new file mode 100644
index 0000000..cbe99fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+ model = "Advantech MX6Q B650V3 QSeven Board";
+ compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ panel_lvds0 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel_lvds1 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+};
+
+&ldb {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 7/7] ARM: dts: imx: Add support for Advantech/GE B850v3
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
Add support for Advantech/GE B850v3 board.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-b850v3.dts | 127 +++++++++++++++++++++++++++++++++++++
2 files changed, 128 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9cdff66..37d5b09 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -312,6 +312,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-arm2.dtb \
imx6q-b450v3.dtb \
imx6q-b650v3.dtb \
+ imx6q-b850v3.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
new file mode 100644
index 0000000..7ebb7d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+ model = "Advantech MX6Q B850V3 QSeven Board";
+ compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ panel_lvds0 {
+ compatible = "auo,b133htn01";
+ backlight = <&backlight_lvds>;
+ ddc-i2c-bus = <&mux_i2c12>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&ldb {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ fsl,dual-channel;
+ status = "okay";
+
+ lvds0: lvds-channel at 0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pca9547_ddc: mux at 70 {
+ compatible = "nxp,pca9547";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mux_i2c11: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+
+ mux_i2c12: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+
+ mux_i2c13: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+
+ mux_i2c14: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+
+ mux_i2c15: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+
+ mux_i2c16: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+
+ mux_i2c17: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+
+ mux_i2c18: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&mux_i2c11>;
+};
+
+&mux_i2c3 {
+ ads7830_2: ads7830 at 4a {
+ compatible = "ti,ads7830";
+ reg = <0x4a>;
+ };
+};
--
2.6.3
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v4 7/7] ARM: dts: imx: Add support for Advantech/GE B850v3
@ 2015-12-02 18:16 ` Akshay Bhat
0 siblings, 0 replies; 20+ messages in thread
From: Akshay Bhat @ 2015-12-02 18:16 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
justin.waters-jEh4hwF5bVhBDgjK7y7TUQ,
l.stach-bIcnvbaLZ9MEGnE8C9+IrQ, Akshay Bhat
Add support for Advantech/GE B850v3 board.
Signed-off-by: Akshay Bhat <akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-b850v3.dts | 127 +++++++++++++++++++++++++++++++++++++
2 files changed, 128 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9cdff66..37d5b09 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -312,6 +312,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-arm2.dtb \
imx6q-b450v3.dtb \
imx6q-b650v3.dtb \
+ imx6q-b850v3.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
new file mode 100644
index 0000000..7ebb7d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+ model = "Advantech MX6Q B850V3 QSeven Board";
+ compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ panel_lvds0 {
+ compatible = "auo,b133htn01";
+ backlight = <&backlight_lvds>;
+ ddc-i2c-bus = <&mux_i2c12>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&ldb {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ fsl,dual-channel;
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pca9547_ddc: mux@70 {
+ compatible = "nxp,pca9547";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mux_i2c11: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+
+ mux_i2c12: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+
+ mux_i2c13: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+
+ mux_i2c14: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+
+ mux_i2c15: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+
+ mux_i2c16: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+
+ mux_i2c17: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+
+ mux_i2c18: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&mux_i2c11>;
+};
+
+&mux_i2c3 {
+ ads7830_2: ads7830@4a {
+ compatible = "ti,ads7830";
+ reg = <0x4a>;
+ };
+};
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread