All of lore.kernel.org
 help / color / mirror / Atom feed
From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 5/5] move erratum a008336 and a008514 to soc specific file
Date: Fri, 4 Dec 2015 09:22:08 -0800	[thread overview]
Message-ID: <5661CBC0.6030606@freescale.com> (raw)
In-Reply-To: <1449221876-25783-6-git-send-email-yao.yuan@freescale.com>



On 12/04/2015 01:37 AM, Yuan Yao wrote:
> As the errata A008336 and A008514 do not apply to all LS series SoCs
> (such as LS1021A, LS1043A) we move them to an soc specific file
> 
> Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
> ---
> Changed in v2:
> 	Update the patch commit message.
> ---
> 
>  arch/arm/cpu/armv8/fsl-layerscape/soc.c | 37 +++++++++++++++++++++++++++++++++
>  drivers/ddr/fsl/fsl_ddr_gen4.c          | 34 ------------------------------
>  2 files changed, 37 insertions(+), 34 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> index 8896b70..738b113 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> @@ -14,6 +14,41 @@
>  DECLARE_GLOBAL_DATA_PTR;
>  
>  #if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
> +/*
> + * This erratum requires setting a value to eddrtqcr1 to
> + * optimal the DDR performance.
> + */
> +static void erratum_a008336(void)
> +{
> +	u32 *eddrtqcr1;
> +
> +#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
> +#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
> +	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
> +	out_le32(eddrtqcr1, 0x63b30002);
> +#endif
> +#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR
> +	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
> +	out_le32(eddrtqcr1, 0x63b30002);
> +#endif
> +#endif
> +}
> +
> +/*
> + * This erratum requires a register write before being Memory
> + * controller 3 being enabled.
> + */
> +static void erratum_a008514(void)
> +{
> +	u32 *eddrtqcr1;
> +
> +#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
> +#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR

I believe this is a typo. It should be CONFIG_SYS_FSL_DCSR_DDR3_ADDR.

> +	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
> +	out_le32(eddrtqcr1, 0x63b20002);
> +#endif
> +#endif
> +}
>  #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
>  #define PLATFORM_CYCLE_ENV_VAR	"a009635_interval_val"
>  
> @@ -118,6 +153,8 @@ void fsl_lsch3_early_init_f(void)
>  	erratum_rcw_src();
>  	init_early_memctl_regs();	/* tighten IFC timing */
>  	erratum_a009203();
> +	erratum_a008514();
> +	erratum_a008336();
>  }
>  
>  #elif defined(CONFIG_LS1043A)


York

  reply	other threads:[~2015-12-04 17:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-04  9:37 [U-Boot] [PATCH 0/5] arm: ls1021a: merge SoC specific code in a separate file Yuan Yao
2015-12-04  9:37 ` [U-Boot] [PATCH 1/5] " Yuan Yao
2015-12-04  9:37 ` [U-Boot] [PATCH 2/5] arm: ls102xa: enable all the snoop signal for masters Yuan Yao
2015-12-04  9:37 ` [U-Boot] [PATCH 3/5] ls102xa: Enable snoop and DVM message requests Yuan Yao
2015-12-04  9:37 ` [U-Boot] [PATCH v2 4/5] armv7/fsl-ls102xa: Workaround for DDR erratum A008514 Yuan Yao
2015-12-04  9:37 ` [U-Boot] [PATCH v2 5/5] move erratum a008336 and a008514 to soc specific file Yuan Yao
2015-12-04 17:22   ` York Sun [this message]
2015-12-05  6:49     ` Yao Yuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5661CBC0.6030606@freescale.com \
    --to=yorksun@freescale.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.