From mboxrd@z Thu Jan 1 00:00:00 1970 From: kapilh@broadcom.com (Kapil Hali) Date: Sat, 5 Dec 2015 17:25:09 +0530 Subject: [PATCH v5 1/5] dt-bindings: add SMP enable-method for Broadcom NSP In-Reply-To: <56621C7A.5050202@gmail.com> References: <1449260611-24417-1-git-send-email-kapilh@broadcom.com> <1449260611-24417-2-git-send-email-kapilh@broadcom.com> <56621C7A.5050202@gmail.com> Message-ID: <5662D09D.8020807@broadcom.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 12/5/2015 4:36 AM, Florian Fainelli wrote: > On 04/12/15 12:23, Kapil Hali wrote: >> Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's >> Northstar Plus CPU to the 32-bit ARM CPU device tree binding >> documentation file and create a new binding documentation for >> Northstar Plus CPU. >> >> Signed-off-by: Kapil Hali >> --- >> .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++++++++++++++++++++ >> Documentation/devicetree/bindings/arm/cpus.txt | 1 + >> 2 files changed, 40 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> >> diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> new file mode 100644 >> index 0000000..bf08872 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> @@ -0,0 +1,39 @@ >> +Broadcom Northstar Plus SoC CPU Enable Method >> +--------------------------------------------- >> +This binding defines the enable method used for starting secondary >> +CPUs in the following Broadcom SoCs: >> + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 >> + >> +The enable method is specified by defining the following required >> +properties in the "cpus" device tree node: >> + - enable-method = "brcm,bcm-nsp-smp"; >> + - secondary-boot-reg = <...>; > > That comment is not quite correct with respect to the paragraph below then? > Right, updated in new patch. >> + >> +The secondary-boot-reg property is a u32 value that specifies the >> +physical address of the register which should hold the common >> +entry point for a secondary CPU. This entry is cpu node specific >> +and should be added per cpu. E.g., in case of NSP (BCM58625) which >> +is a dual core CPU SoC, this entry should be added to cpu1 node. >> + >> + >> +Example: >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + enable-method = "brcm,bcm-nsp-smp"; > > Based on the requested feedback, this property should now be placed > under the cpu1 node. > Right, updated in the new patch. >> + >> + cpu0: cpu at 0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a9"; >> + next-level-cache = <&L2>; >> + reg = <0>; >> + }; >> + >> + cpu1: cpu at 1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a9"; >> + next-level-cache = <&L2>; >> + reg = <1>; >> + secondary-boot-reg = <0xffff042c>; >> + }; >> + }; >> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt >> index 3a07a87..d191554 100644 >> --- a/Documentation/devicetree/bindings/arm/cpus.txt >> +++ b/Documentation/devicetree/bindings/arm/cpus.txt >> @@ -190,6 +190,7 @@ nodes to be present and contain the properties described below. >> "allwinner,sun6i-a31" >> "allwinner,sun8i-a23" >> "arm,psci" >> + "brcm,bcm-nsp-smp" >> "brcm,brahma-b15" >> "marvell,armada-375-smp" >> "marvell,armada-380-smp" >> > > Thanks, Kapil From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kapil Hali Subject: Re: [PATCH v5 1/5] dt-bindings: add SMP enable-method for Broadcom NSP Date: Sat, 5 Dec 2015 17:25:09 +0530 Message-ID: <5662D09D.8020807@broadcom.com> References: <1449260611-24417-1-git-send-email-kapilh@broadcom.com> <1449260611-24417-2-git-send-email-kapilh@broadcom.com> <56621C7A.5050202@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <56621C7A.5050202@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Florian Fainelli , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Ray Jui , Scott Branden , Jon Mason Cc: Gregory Fong , Lee Jones , Hauke Mehrtens , Kever Yang , Maxime Ripard , Olof Johansson , Paul Walmsley , Linus Walleij , Chen-Yu Tsai , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com List-Id: devicetree@vger.kernel.org On 12/5/2015 4:36 AM, Florian Fainelli wrote: > On 04/12/15 12:23, Kapil Hali wrote: >> Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's >> Northstar Plus CPU to the 32-bit ARM CPU device tree binding >> documentation file and create a new binding documentation for >> Northstar Plus CPU. >> >> Signed-off-by: Kapil Hali >> --- >> .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++++++++++++++++++++ >> Documentation/devicetree/bindings/arm/cpus.txt | 1 + >> 2 files changed, 40 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> >> diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> new file mode 100644 >> index 0000000..bf08872 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> @@ -0,0 +1,39 @@ >> +Broadcom Northstar Plus SoC CPU Enable Method >> +--------------------------------------------- >> +This binding defines the enable method used for starting secondary >> +CPUs in the following Broadcom SoCs: >> + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 >> + >> +The enable method is specified by defining the following required >> +properties in the "cpus" device tree node: >> + - enable-method = "brcm,bcm-nsp-smp"; >> + - secondary-boot-reg = <...>; > > That comment is not quite correct with respect to the paragraph below then? > Right, updated in new patch. >> + >> +The secondary-boot-reg property is a u32 value that specifies the >> +physical address of the register which should hold the common >> +entry point for a secondary CPU. This entry is cpu node specific >> +and should be added per cpu. E.g., in case of NSP (BCM58625) which >> +is a dual core CPU SoC, this entry should be added to cpu1 node. >> + >> + >> +Example: >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + enable-method = "brcm,bcm-nsp-smp"; > > Based on the requested feedback, this property should now be placed > under the cpu1 node. > Right, updated in the new patch. >> + >> + cpu0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a9"; >> + next-level-cache = <&L2>; >> + reg = <0>; >> + }; >> + >> + cpu1: cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a9"; >> + next-level-cache = <&L2>; >> + reg = <1>; >> + secondary-boot-reg = <0xffff042c>; >> + }; >> + }; >> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt >> index 3a07a87..d191554 100644 >> --- a/Documentation/devicetree/bindings/arm/cpus.txt >> +++ b/Documentation/devicetree/bindings/arm/cpus.txt >> @@ -190,6 +190,7 @@ nodes to be present and contain the properties described below. >> "allwinner,sun6i-a31" >> "allwinner,sun8i-a23" >> "arm,psci" >> + "brcm,bcm-nsp-smp" >> "brcm,brahma-b15" >> "marvell,armada-375-smp" >> "marvell,armada-380-smp" >> > > Thanks, Kapil From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754454AbbLELzY (ORCPT ); Sat, 5 Dec 2015 06:55:24 -0500 Received: from mail-gw3-out.broadcom.com ([216.31.210.64]:57217 "EHLO mail-gw3-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754197AbbLELzT (ORCPT ); Sat, 5 Dec 2015 06:55:19 -0500 X-IronPort-AV: E=Sophos;i="5.20,384,1444719600"; d="scan'208";a="82291820" Subject: Re: [PATCH v5 1/5] dt-bindings: add SMP enable-method for Broadcom NSP To: Florian Fainelli , Rob Herring , Pawel Moll , Mark Rutland , "Ian Campbell" , Kumar Gala , Russell King , Ray Jui , "Scott Branden" , Jon Mason References: <1449260611-24417-1-git-send-email-kapilh@broadcom.com> <1449260611-24417-2-git-send-email-kapilh@broadcom.com> <56621C7A.5050202@gmail.com> CC: Gregory Fong , Lee Jones , "Hauke Mehrtens" , Kever Yang , Maxime Ripard , Olof Johansson , Paul Walmsley , Linus Walleij , Chen-Yu Tsai , , , , From: Kapil Hali Message-ID: <5662D09D.8020807@broadcom.com> Date: Sat, 5 Dec 2015 17:25:09 +0530 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: <56621C7A.5050202@gmail.com> Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 12/5/2015 4:36 AM, Florian Fainelli wrote: > On 04/12/15 12:23, Kapil Hali wrote: >> Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's >> Northstar Plus CPU to the 32-bit ARM CPU device tree binding >> documentation file and create a new binding documentation for >> Northstar Plus CPU. >> >> Signed-off-by: Kapil Hali >> --- >> .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++++++++++++++++++++ >> Documentation/devicetree/bindings/arm/cpus.txt | 1 + >> 2 files changed, 40 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> >> diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> new file mode 100644 >> index 0000000..bf08872 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >> @@ -0,0 +1,39 @@ >> +Broadcom Northstar Plus SoC CPU Enable Method >> +--------------------------------------------- >> +This binding defines the enable method used for starting secondary >> +CPUs in the following Broadcom SoCs: >> + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 >> + >> +The enable method is specified by defining the following required >> +properties in the "cpus" device tree node: >> + - enable-method = "brcm,bcm-nsp-smp"; >> + - secondary-boot-reg = <...>; > > That comment is not quite correct with respect to the paragraph below then? > Right, updated in new patch. >> + >> +The secondary-boot-reg property is a u32 value that specifies the >> +physical address of the register which should hold the common >> +entry point for a secondary CPU. This entry is cpu node specific >> +and should be added per cpu. E.g., in case of NSP (BCM58625) which >> +is a dual core CPU SoC, this entry should be added to cpu1 node. >> + >> + >> +Example: >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + enable-method = "brcm,bcm-nsp-smp"; > > Based on the requested feedback, this property should now be placed > under the cpu1 node. > Right, updated in the new patch. >> + >> + cpu0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a9"; >> + next-level-cache = <&L2>; >> + reg = <0>; >> + }; >> + >> + cpu1: cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a9"; >> + next-level-cache = <&L2>; >> + reg = <1>; >> + secondary-boot-reg = <0xffff042c>; >> + }; >> + }; >> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt >> index 3a07a87..d191554 100644 >> --- a/Documentation/devicetree/bindings/arm/cpus.txt >> +++ b/Documentation/devicetree/bindings/arm/cpus.txt >> @@ -190,6 +190,7 @@ nodes to be present and contain the properties described below. >> "allwinner,sun6i-a31" >> "allwinner,sun8i-a23" >> "arm,psci" >> + "brcm,bcm-nsp-smp" >> "brcm,brahma-b15" >> "marvell,armada-375-smp" >> "marvell,armada-380-smp" >> > > Thanks, Kapil