Re: BeagleBone...bitbake -v core-image-sato stops

[kaffeesurrogat@posteo.de]

Thanks so far. I wasn't aware of the log files in temp/log.do_compile 
directory ;-) Well I've found an error, perhaps not related to 
attr-native but to gcc:

the log-file says:

+ cd 
/home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi
+ do_compile
+ oe_runmake all-gcc all-target-libgcc
+ oe_runmake_call all-gcc all-target-libgcc
+ bbnote make -j 8 'ARCH_FLAGS_FOR_TARGET= -march=armv7-a 
-mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 
-isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include' 
all-gcc all-target-libgcc
+ echo 'NOTE: make -j 8 ARCH_FLAGS_FOR_TARGET= -march=armv7-a 
-mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 
-isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include 
all-gcc all-target-libgcc'
NOTE: make -j 8 ARCH_FLAGS_FOR_TARGET= -march=armv7-a -mthumb-interwork 
-mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 
-isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include 
all-gcc all-target-libgcc
+ make -j 8 'ARCH_FLAGS_FOR_TARGET= -march=armv7-a -mthumb-interwork 
-mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 
-isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include' 
all-gcc all-target-libgcc
make: *** No rule to make target 'all-gcc'.  Stop.
+ die 'oe_runmake failed'
+ bbfatal 'oe_runmake failed'
+ echo 'ERROR: oe_runmake failed'
ERROR: oe_runmake failed


It might happen to be the problem, but I don't know ..... I will poke 
around, to find some information about setting up the gcc-toolchain. 
Could this be the problem ?


Thanks,

kaffeesurrogat

Am 06.12.2015 um 15:57 schrieb Michael Habibi:
> You may be able to look under ${WORKDIR}/temp/log.do_compile to see 
> what the logs are saying it got stuck doing.
>
> On Sun, Dec 6, 2015 at 4:16 AM, <kaffeesurrogat@posteo.de 
> <mailto:kaffeesurrogat@posteo.de>> wrote:
>
>     Hello to all,
>
>     this is my first question ;-) I'm doing my first steps with a
>     beaglebone black and yocto. I've bought the beaglebone book "Using
>     Yocto Project with Beaglebone Black" and started the bitbake with
>     "bitbake -v core-image-sato". After a while the bitbake-process
>     reached a package called attr-native-2.4.47-r0 and it was not able
>     to move on. Bitmaker did not complain about anything, but I've
>     started the process yesterday in the morning and until now there
>     was no progress.
>
>     I've downloaded the source with:
>
>     git clone -b daisy git://git.yoctoproject.org/poky.git
>     <http://git.yoctoproject.org/poky.git>
>
>     My Distro is:
>
>     gentoo
>
>     I've started the bitbake with:
>
>     bitbake -v core-image-sato
>
>
>     Now I'm wondering, if I did something wrong .....
>
>     Greetings,
>
>     kaffeesurrogat
>
>
>     --
>     _______________________________________________
>     yocto mailing list
>     yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
>     https://lists.yoctoproject.org/listinfo/yocto
>
>