[U-Boot] [PATCH] imx: mx6: fix reg base address when runtime usage

[Stefano Babic <sbabic@denx.de>]

On 30/11/2015 09:04, Peng Fan wrote:
> Should use parenthese to wrap the macro definition, otherwise
> we will encounter error like the following:
> 
> "
> if (base_addr != LCDIF1_BASE_ADDR) {
>     puts("Wrong LCD interface!\n");
>     return -EINVAL;
> }
> "
> 
> Without this patch, we will always encounter "Wrong LCD interface".
> 
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  arch/arm/include/asm/arch-mx6/imx-regs.h | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index 2f068e5..f24525e 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -335,10 +335,10 @@
>  #include <asm/types.h>
>  
>  /* only for i.MX6SX/UL */
> -#define WDOG3_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL) ?	\
> -			 MX6UL_WDOG3_BASE_ADDR :  MX6SX_WDOG3_BASE_ADDR)
> -#define LCDIF1_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL)) ?	\
> -			  MX6UL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR
> +#define WDOG3_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6UL) ?	\
> +			 MX6UL_WDOG3_BASE_ADDR :  MX6SX_WDOG3_BASE_ADDR))
> +#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6UL)) ?	\
> +			  MX6UL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)
>  
>  
>  extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
> 
Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================