diff for duplicates of <566807DC.8030107@huawei.com> diff --git a/a/1.txt b/N1/1.txt index 45c80ed..feed6f4 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -4,7 +4,7 @@ On 2015/12/8 23:25, Rob Herring wrote: > On Mon, Dec 07, 2015 at 04:25:06PM +0800, yankejian wrote: >> Signed-nux start up, we get the log below: >> "Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl ->> mdio_bus mdio at 803c0000: mdio sys ctl reg has not maped " +>> mdio_bus mdio@803c0000: mdio sys ctl reg has not maped " >> >> the source code about the subctrl is dealled with syscon, but dts doesn't. > The source... @@ -23,7 +23,7 @@ Best Regards, yankejian >> DT files of Hisilicon Hip05-D02 development board. >> ->> Signed-off-by: yankejian <yankejian@huawei.com> +>> Signed-off-by: yankejian <yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> >> --- >> change log: >> v2: @@ -58,7 +58,7 @@ yankejian >> + >> +Example: >> + /* for HiP05 PCIe-SAS system */ ->> + peri-c-subctrl: sub-ctrl-c at 80000000 { +>> + peri-c-subctrl: sub-ctrl-c@80000000 { > s/sub-ctrl-c/syscon/ Thanks for pointing it out. it will be changed in patch v3. Best Regards, @@ -78,19 +78,19 @@ yankejian >> clock-frequency = <200000000>; >> }; >> ->> + peri_c_subctrl: sub-ctrl-c at 80000000 { +>> + peri_c_subctrl: sub-ctrl-c@80000000 { >> + compatible = "hisilicon,peri-c-subctrl", "syscon"; >> + reg = < 0x0 0x80000000 0x0 0x10000>; >> + }; >> + ->> uart0: uart at 80300000 { +>> uart0: uart@80300000 { >> compatible = "snps,dw-apb-uart"; >> reg = <0x0 0x80300000 0x0 0x10000>; >> diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi >> index 606dd5a..da7b6e6 100644 >> --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi >> +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi ->> @@ -10,8 +10,8 @@ soc0: soc at 000000000 { +>> @@ -10,8 +10,8 @@ soc0: soc@000000000 { >> #address-cells = <1>; >> #size-cells = <0>; >> compatible = "hisilicon,hns-mdio"; @@ -99,10 +99,16 @@ yankejian >> + reg = <0x0 0x803c0000 0x0 0x10000>; >> + subctrl-vbase = <&peri_c_subctrl>; >> ->> soc0_phy0: ethernet-phy at 0 { +>> soc0_phy0: ethernet-phy@0 { >> reg = <0x0>; >> -- >> 1.9.1 >> > . > + + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index cfe8672..ea1a42b 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,10 +1,34 @@ "ref\01449476707-224320-1-git-send-email-yankejian@huawei.com\0" "ref\01449476707-224320-2-git-send-email-yankejian@huawei.com\0" "ref\020151208152514.GA27037@rob-hp-laptop\0" - "From\0yankejian@huawei.com (Yankejian (Hackim Yim))\0" - "Subject\0[PATCH v2 next 1/2] dts: hisi: fixes no syscon error when init mdio\0" + "From\0Yankejian (Hackim Yim) <yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>\0" + "Subject\0Re: [PATCH v2 next 1/2] dts: hisi: fixes no syscon error when init mdio\0" "Date\0Wed, 9 Dec 2015 18:52:12 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "Cc\0davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org" + pawel.moll-5wv7dgnIgG8@public.gmane.org + mark.rutland-5wv7dgnIgG8@public.gmane.org + ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org + galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org + xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org + catalin.marinas-5wv7dgnIgG8@public.gmane.org + will.deacon-5wv7dgnIgG8@public.gmane.org + wangkefeng.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org + dingtianhong-hv44wF8Li93QT0dZR+AlfA@public.gmane.org + liguozhu-hv44wF8Li93QT0dZR+AlfA@public.gmane.org + Yisen.Zhuang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org + sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org + haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org + wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org + bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org + long.wanglong-hv44wF8Li93QT0dZR+AlfA@public.gmane.org + leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org + haifeng.wei-hv44wF8Li93QT0dZR+AlfA@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org\0" "\00:1\0" "b\0" "\n" @@ -13,7 +37,7 @@ "> On Mon, Dec 07, 2015 at 04:25:06PM +0800, yankejian wrote:\n" ">> Signed-nux start up, we get the log below:\n" ">> \"Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl\n" - ">> mdio_bus mdio at 803c0000: mdio sys ctl reg has not maped \"\n" + ">> mdio_bus mdio@803c0000: mdio sys ctl reg has not maped \"\n" ">>\n" ">> the source code about the subctrl is dealled with syscon, but dts doesn't.\n" "> The source...\n" @@ -32,7 +56,7 @@ "yankejian\n" ">> DT files of Hisilicon Hip05-D02 development board.\n" ">>\n" - ">> Signed-off-by: yankejian <yankejian@huawei.com>\n" + ">> Signed-off-by: yankejian <yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>\n" ">> ---\n" ">> change log:\n" ">> v2:\n" @@ -67,7 +91,7 @@ ">> +\n" ">> +Example:\n" ">> +\t/* for HiP05 PCIe-SAS system */\n" - ">> +\tperi-c-subctrl: sub-ctrl-c at 80000000 {\n" + ">> +\tperi-c-subctrl: sub-ctrl-c@80000000 {\n" "> s/sub-ctrl-c/syscon/\n" "Thanks for pointing it out. it will be changed in patch v3.\n" "Best Regards,\n" @@ -87,19 +111,19 @@ ">> \t\t\tclock-frequency = <200000000>;\n" ">> \t\t};\n" ">> \n" - ">> +\t\tperi_c_subctrl: sub-ctrl-c at 80000000 {\n" + ">> +\t\tperi_c_subctrl: sub-ctrl-c@80000000 {\n" ">> +\t\t\tcompatible = \"hisilicon,peri-c-subctrl\", \"syscon\";\n" ">> +\t\t\treg = < 0x0 0x80000000 0x0 0x10000>;\n" ">> +\t\t};\n" ">> +\n" - ">> \t\tuart0: uart at 80300000 {\n" + ">> \t\tuart0: uart@80300000 {\n" ">> \t\t\tcompatible = \"snps,dw-apb-uart\";\n" ">> \t\t\treg = <0x0 0x80300000 0x0 0x10000>;\n" ">> diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" ">> index 606dd5a..da7b6e6 100644\n" ">> --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" ">> +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" - ">> @@ -10,8 +10,8 @@ soc0: soc at 000000000 {\n" + ">> @@ -10,8 +10,8 @@ soc0: soc@000000000 {\n" ">> \t\t#address-cells = <1>;\n" ">> \t\t#size-cells = <0>;\n" ">> \t\tcompatible = \"hisilicon,hns-mdio\";\n" @@ -108,12 +132,18 @@ ">> +\t\treg = <0x0 0x803c0000 0x0 0x10000>;\n" ">> +\t\tsubctrl-vbase = <&peri_c_subctrl>;\n" ">> \n" - ">> \t\tsoc0_phy0: ethernet-phy at 0 {\n" + ">> \t\tsoc0_phy0: ethernet-phy@0 {\n" ">> \t\t\treg = <0x0>;\n" ">> -- \n" ">> 1.9.1\n" ">>\n" "> .\n" - > + ">\n" + "\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -e805a085056b249780a9b57d2a7d9eb0b864a32448601a51690d76f59fbebff7 +e42a391dfbedc906e7cbc4ad8987c60206a45df5be9cd6b737e8af5dc210360d
diff --git a/a/1.txt b/N2/1.txt index 45c80ed..8dd11a1 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -4,7 +4,7 @@ On 2015/12/8 23:25, Rob Herring wrote: > On Mon, Dec 07, 2015 at 04:25:06PM +0800, yankejian wrote: >> Signed-nux start up, we get the log below: >> "Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl ->> mdio_bus mdio at 803c0000: mdio sys ctl reg has not maped " +>> mdio_bus mdio@803c0000: mdio sys ctl reg has not maped " >> >> the source code about the subctrl is dealled with syscon, but dts doesn't. > The source... @@ -58,7 +58,7 @@ yankejian >> + >> +Example: >> + /* for HiP05 PCIe-SAS system */ ->> + peri-c-subctrl: sub-ctrl-c at 80000000 { +>> + peri-c-subctrl: sub-ctrl-c@80000000 { > s/sub-ctrl-c/syscon/ Thanks for pointing it out. it will be changed in patch v3. Best Regards, @@ -78,19 +78,19 @@ yankejian >> clock-frequency = <200000000>; >> }; >> ->> + peri_c_subctrl: sub-ctrl-c at 80000000 { +>> + peri_c_subctrl: sub-ctrl-c@80000000 { >> + compatible = "hisilicon,peri-c-subctrl", "syscon"; >> + reg = < 0x0 0x80000000 0x0 0x10000>; >> + }; >> + ->> uart0: uart at 80300000 { +>> uart0: uart@80300000 { >> compatible = "snps,dw-apb-uart"; >> reg = <0x0 0x80300000 0x0 0x10000>; >> diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi >> index 606dd5a..da7b6e6 100644 >> --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi >> +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi ->> @@ -10,8 +10,8 @@ soc0: soc at 000000000 { +>> @@ -10,8 +10,8 @@ soc0: soc@000000000 { >> #address-cells = <1>; >> #size-cells = <0>; >> compatible = "hisilicon,hns-mdio"; @@ -99,7 +99,7 @@ yankejian >> + reg = <0x0 0x803c0000 0x0 0x10000>; >> + subctrl-vbase = <&peri_c_subctrl>; >> ->> soc0_phy0: ethernet-phy at 0 { +>> soc0_phy0: ethernet-phy@0 { >> reg = <0x0>; >> -- >> 1.9.1 diff --git a/a/content_digest b/N2/content_digest index cfe8672..6001488 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,10 +1,34 @@ "ref\01449476707-224320-1-git-send-email-yankejian@huawei.com\0" "ref\01449476707-224320-2-git-send-email-yankejian@huawei.com\0" "ref\020151208152514.GA27037@rob-hp-laptop\0" - "From\0yankejian@huawei.com (Yankejian (Hackim Yim))\0" - "Subject\0[PATCH v2 next 1/2] dts: hisi: fixes no syscon error when init mdio\0" + "From\0Yankejian (Hackim Yim) <yankejian@huawei.com>\0" + "Subject\0Re: [PATCH v2 next 1/2] dts: hisi: fixes no syscon error when init mdio\0" "Date\0Wed, 9 Dec 2015 18:52:12 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Rob Herring <robh@kernel.org>\0" + "Cc\0<davem@davemloft.net>" + <pawel.moll@arm.com> + <mark.rutland@arm.com> + <ijc+devicetree@hellion.org.uk> + <galak@codeaurora.org> + <xuwei5@hisilicon.com> + <catalin.marinas@arm.com> + <will.deacon@arm.com> + <wangkefeng.wang@huawei.com> + <dingtianhong@huawei.com> + <liguozhu@huawei.com> + <Yisen.Zhuang@huawei.com> + <sboyd@codeaurora.org> + <haojian.zhuang@linaro.org> + <wangzhou1@hisilicon.com> + <bintian.wang@huawei.com> + <long.wanglong@huawei.com> + <leo.yan@linaro.org> + <haifeng.wei@huawei.com> + <devicetree@vger.kernel.org> + <linux-arm-kernel@lists.infradead.org> + <linux-kernel@vger.kernel.org> + <netdev@vger.kernel.org> + " <linuxarm@huawei.com>\0" "\00:1\0" "b\0" "\n" @@ -13,7 +37,7 @@ "> On Mon, Dec 07, 2015 at 04:25:06PM +0800, yankejian wrote:\n" ">> Signed-nux start up, we get the log below:\n" ">> \"Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl\n" - ">> mdio_bus mdio at 803c0000: mdio sys ctl reg has not maped \"\n" + ">> mdio_bus mdio@803c0000: mdio sys ctl reg has not maped \"\n" ">>\n" ">> the source code about the subctrl is dealled with syscon, but dts doesn't.\n" "> The source...\n" @@ -67,7 +91,7 @@ ">> +\n" ">> +Example:\n" ">> +\t/* for HiP05 PCIe-SAS system */\n" - ">> +\tperi-c-subctrl: sub-ctrl-c at 80000000 {\n" + ">> +\tperi-c-subctrl: sub-ctrl-c@80000000 {\n" "> s/sub-ctrl-c/syscon/\n" "Thanks for pointing it out. it will be changed in patch v3.\n" "Best Regards,\n" @@ -87,19 +111,19 @@ ">> \t\t\tclock-frequency = <200000000>;\n" ">> \t\t};\n" ">> \n" - ">> +\t\tperi_c_subctrl: sub-ctrl-c at 80000000 {\n" + ">> +\t\tperi_c_subctrl: sub-ctrl-c@80000000 {\n" ">> +\t\t\tcompatible = \"hisilicon,peri-c-subctrl\", \"syscon\";\n" ">> +\t\t\treg = < 0x0 0x80000000 0x0 0x10000>;\n" ">> +\t\t};\n" ">> +\n" - ">> \t\tuart0: uart at 80300000 {\n" + ">> \t\tuart0: uart@80300000 {\n" ">> \t\t\tcompatible = \"snps,dw-apb-uart\";\n" ">> \t\t\treg = <0x0 0x80300000 0x0 0x10000>;\n" ">> diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" ">> index 606dd5a..da7b6e6 100644\n" ">> --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" ">> +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" - ">> @@ -10,8 +10,8 @@ soc0: soc at 000000000 {\n" + ">> @@ -10,8 +10,8 @@ soc0: soc@000000000 {\n" ">> \t\t#address-cells = <1>;\n" ">> \t\t#size-cells = <0>;\n" ">> \t\tcompatible = \"hisilicon,hns-mdio\";\n" @@ -108,7 +132,7 @@ ">> +\t\treg = <0x0 0x803c0000 0x0 0x10000>;\n" ">> +\t\tsubctrl-vbase = <&peri_c_subctrl>;\n" ">> \n" - ">> \t\tsoc0_phy0: ethernet-phy at 0 {\n" + ">> \t\tsoc0_phy0: ethernet-phy@0 {\n" ">> \t\t\treg = <0x0>;\n" ">> -- \n" ">> 1.9.1\n" @@ -116,4 +140,4 @@ "> .\n" > -e805a085056b249780a9b57d2a7d9eb0b864a32448601a51690d76f59fbebff7 +6ee349b215b67ce83bd359401f9a9b5b2b2dd8eaabe97f09d38c96833bd46271
diff --git a/a/1.txt b/N3/1.txt index 45c80ed..feed6f4 100644 --- a/a/1.txt +++ b/N3/1.txt @@ -4,7 +4,7 @@ On 2015/12/8 23:25, Rob Herring wrote: > On Mon, Dec 07, 2015 at 04:25:06PM +0800, yankejian wrote: >> Signed-nux start up, we get the log below: >> "Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl ->> mdio_bus mdio at 803c0000: mdio sys ctl reg has not maped " +>> mdio_bus mdio@803c0000: mdio sys ctl reg has not maped " >> >> the source code about the subctrl is dealled with syscon, but dts doesn't. > The source... @@ -23,7 +23,7 @@ Best Regards, yankejian >> DT files of Hisilicon Hip05-D02 development board. >> ->> Signed-off-by: yankejian <yankejian@huawei.com> +>> Signed-off-by: yankejian <yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> >> --- >> change log: >> v2: @@ -58,7 +58,7 @@ yankejian >> + >> +Example: >> + /* for HiP05 PCIe-SAS system */ ->> + peri-c-subctrl: sub-ctrl-c at 80000000 { +>> + peri-c-subctrl: sub-ctrl-c@80000000 { > s/sub-ctrl-c/syscon/ Thanks for pointing it out. it will be changed in patch v3. Best Regards, @@ -78,19 +78,19 @@ yankejian >> clock-frequency = <200000000>; >> }; >> ->> + peri_c_subctrl: sub-ctrl-c at 80000000 { +>> + peri_c_subctrl: sub-ctrl-c@80000000 { >> + compatible = "hisilicon,peri-c-subctrl", "syscon"; >> + reg = < 0x0 0x80000000 0x0 0x10000>; >> + }; >> + ->> uart0: uart at 80300000 { +>> uart0: uart@80300000 { >> compatible = "snps,dw-apb-uart"; >> reg = <0x0 0x80300000 0x0 0x10000>; >> diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi >> index 606dd5a..da7b6e6 100644 >> --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi >> +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi ->> @@ -10,8 +10,8 @@ soc0: soc at 000000000 { +>> @@ -10,8 +10,8 @@ soc0: soc@000000000 { >> #address-cells = <1>; >> #size-cells = <0>; >> compatible = "hisilicon,hns-mdio"; @@ -99,10 +99,16 @@ yankejian >> + reg = <0x0 0x803c0000 0x0 0x10000>; >> + subctrl-vbase = <&peri_c_subctrl>; >> ->> soc0_phy0: ethernet-phy at 0 { +>> soc0_phy0: ethernet-phy@0 { >> reg = <0x0>; >> -- >> 1.9.1 >> > . > + + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N3/content_digest index cfe8672..8532b90 100644 --- a/a/content_digest +++ b/N3/content_digest @@ -1,10 +1,34 @@ "ref\01449476707-224320-1-git-send-email-yankejian@huawei.com\0" "ref\01449476707-224320-2-git-send-email-yankejian@huawei.com\0" "ref\020151208152514.GA27037@rob-hp-laptop\0" - "From\0yankejian@huawei.com (Yankejian (Hackim Yim))\0" - "Subject\0[PATCH v2 next 1/2] dts: hisi: fixes no syscon error when init mdio\0" + "From\0Yankejian (Hackim Yim) <yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>\0" + "Subject\0Re: [PATCH v2 next 1/2] dts: hisi: fixes no syscon error when init mdio\0" "Date\0Wed, 9 Dec 2015 18:52:12 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "Cc\0<davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>" + <pawel.moll-5wv7dgnIgG8@public.gmane.org> + <mark.rutland-5wv7dgnIgG8@public.gmane.org> + <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> + <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> + <xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> + <catalin.marinas-5wv7dgnIgG8@public.gmane.org> + <will.deacon-5wv7dgnIgG8@public.gmane.org> + <wangkefeng.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> + <dingtianhong-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> + <liguozhu-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> + <Yisen.Zhuang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> + <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> + <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> + <bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> + <long.wanglong-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> + <leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + <haifeng.wei-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> + <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> + <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + <netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + " <linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>\0" "\00:1\0" "b\0" "\n" @@ -13,7 +37,7 @@ "> On Mon, Dec 07, 2015 at 04:25:06PM +0800, yankejian wrote:\n" ">> Signed-nux start up, we get the log below:\n" ">> \"Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl\n" - ">> mdio_bus mdio at 803c0000: mdio sys ctl reg has not maped \"\n" + ">> mdio_bus mdio@803c0000: mdio sys ctl reg has not maped \"\n" ">>\n" ">> the source code about the subctrl is dealled with syscon, but dts doesn't.\n" "> The source...\n" @@ -32,7 +56,7 @@ "yankejian\n" ">> DT files of Hisilicon Hip05-D02 development board.\n" ">>\n" - ">> Signed-off-by: yankejian <yankejian@huawei.com>\n" + ">> Signed-off-by: yankejian <yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>\n" ">> ---\n" ">> change log:\n" ">> v2:\n" @@ -67,7 +91,7 @@ ">> +\n" ">> +Example:\n" ">> +\t/* for HiP05 PCIe-SAS system */\n" - ">> +\tperi-c-subctrl: sub-ctrl-c at 80000000 {\n" + ">> +\tperi-c-subctrl: sub-ctrl-c@80000000 {\n" "> s/sub-ctrl-c/syscon/\n" "Thanks for pointing it out. it will be changed in patch v3.\n" "Best Regards,\n" @@ -87,19 +111,19 @@ ">> \t\t\tclock-frequency = <200000000>;\n" ">> \t\t};\n" ">> \n" - ">> +\t\tperi_c_subctrl: sub-ctrl-c at 80000000 {\n" + ">> +\t\tperi_c_subctrl: sub-ctrl-c@80000000 {\n" ">> +\t\t\tcompatible = \"hisilicon,peri-c-subctrl\", \"syscon\";\n" ">> +\t\t\treg = < 0x0 0x80000000 0x0 0x10000>;\n" ">> +\t\t};\n" ">> +\n" - ">> \t\tuart0: uart at 80300000 {\n" + ">> \t\tuart0: uart@80300000 {\n" ">> \t\t\tcompatible = \"snps,dw-apb-uart\";\n" ">> \t\t\treg = <0x0 0x80300000 0x0 0x10000>;\n" ">> diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" ">> index 606dd5a..da7b6e6 100644\n" ">> --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" ">> +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi\n" - ">> @@ -10,8 +10,8 @@ soc0: soc at 000000000 {\n" + ">> @@ -10,8 +10,8 @@ soc0: soc@000000000 {\n" ">> \t\t#address-cells = <1>;\n" ">> \t\t#size-cells = <0>;\n" ">> \t\tcompatible = \"hisilicon,hns-mdio\";\n" @@ -108,12 +132,18 @@ ">> +\t\treg = <0x0 0x803c0000 0x0 0x10000>;\n" ">> +\t\tsubctrl-vbase = <&peri_c_subctrl>;\n" ">> \n" - ">> \t\tsoc0_phy0: ethernet-phy at 0 {\n" + ">> \t\tsoc0_phy0: ethernet-phy@0 {\n" ">> \t\t\treg = <0x0>;\n" ">> -- \n" ">> 1.9.1\n" ">>\n" "> .\n" - > + ">\n" + "\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -e805a085056b249780a9b57d2a7d9eb0b864a32448601a51690d76f59fbebff7 +95cde71793c3f43068a508734379ccae4aab1a9307ab084842303f893afacf3e
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.