From mboxrd@z Thu Jan 1 00:00:00 1970 From: Przemyslaw Marczak Date: Fri, 11 Dec 2015 13:59:25 +0100 Subject: [U-Boot] Odroid U3 not able to boot using latest u-boot. In-Reply-To: References: Message-ID: <566AC8AD.3060803@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Anand, On 12/11/2015 01:48 PM, Anand Moon wrote: > Hi Przemyslaw, > > I have give it a try to put latest u-boot on my microsdcard > u-boot and it failed to boot. Could you help me out on this. > > U-Boot 2016.01-rc2-25762-g00502fe (Dec 11 2015 - 17:49:34 +0530) > > CPU: Exynos4412 @ 1 GHz > Model: Odroid based on Exynos4412 > Board: Odroid based on Exynos4412 > Type: u3 > DRAM: 2 GiB > __of_translate_address: Bad cell count for gpf0 > __of_translate_address: Bad cell count for gpj0 > __of_translate_address: Bad cell count for gpk0 > __of_translate_address: Bad cell count for gpm0 > __of_translate_address: Bad cell count for gpx0 > LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling > LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling > LDO21 at TFLASH_2.8V: set 2800000 uV; enabling > MMC: EXYNOS DWMMC: 0 > Card did not respond to voltage select! > *** Warning - MMC init failed, using default environment > > Net: No ethernet found. > Hit any key to stop autoboot: 0 > ** Bad device mmc 0 ** > ** Bad device mmc 0 ** > ** Bad device mmc 0 ** > ** Bad device mmc 0 ** > Odroid # > Odroid # > Odroid # > Odroid # > > -Anand Moon > > Yes, I know about this issue. There is a patch which fixes this: https://patchwork.ozlabs.org/patch/537372/ Please apply this patch locally, I will send another solution for this issue, since at present it may be unsafe for some cases on other platforms. Best regards, -- Przemyslaw Marczak Samsung R&D Institute Poland Samsung Electronics p.marczak at samsung.com