[PATCH linux-next v4 04/11] MIPS: bcm963xx: Move extended flash address to bcm_tag header file

[Simon Arlott <simon@fire.lp0.eu>]

The extended flash address needs to be subtracted from bcm_tag flash
image offsets. Move this value to the bcm_tag header file.

Renamed define name to consistently use bcm963xx for flash layout
which should be considered a property of the board and not the SoC
(i.e. bcm63xx could theoretically be used on a board without CFE
or any flash).

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
---
v4: New patch.

 drivers/mtd/bcm63xxpart.c    | 6 ++----
 include/linux/bcm963xx_tag.h | 5 +++++
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index b5bad1f..cec3188 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -37,8 +37,6 @@
 #include <asm/mach-bcm63xx/bcm63xx_nvram.h>
 #include <asm/mach-bcm63xx/board_bcm963xx.h>
 
-#define BCM63XX_EXTENDED_SIZE	0xBFC00000	/* Extended flash address */
-
 #define BCM63XX_CFE_BLOCK_SIZE	SZ_64K		/* always at least 64KiB */
 
 #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
@@ -123,8 +121,8 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 		pr_info("CFE boot tag found with version %s and board type %s\n",
 			tagversion, boardid);
 
-		kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
-		rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
+		kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
+		rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
 		spareaddr = roundup(totallen, master->erasesize) + cfelen;
 
 		if (rootfsaddr < kerneladdr) {
diff --git a/include/linux/bcm963xx_tag.h b/include/linux/bcm963xx_tag.h
index f389dac..08e0133 100644
--- a/include/linux/bcm963xx_tag.h
+++ b/include/linux/bcm963xx_tag.h
@@ -28,6 +28,11 @@
 	"DWV-S0", \
 }
 
+/* Extended flash address, needs to be subtracted
+ * from bcm_tag flash image offsets.
+ */
+#define BCM963XX_EXTENDED_SIZE	0xBFC00000
+
 /*
  * The broadcom firmware assumes the rootfs starts the image,
  * therefore uses the rootfs start (flash_image_address)
-- 
2.1.4

-- 
Simon Arlott