All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexey Kodanev <alexey.kodanev@oracle.com>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH] network/dctcp: add dctcp congestion control algorithm test
Date: Tue, 15 Dec 2015 14:57:13 +0300	[thread overview]
Message-ID: <56700019.9020502@oracle.com> (raw)
In-Reply-To: <1445958816-27745-1-git-send-email-alexey.kodanev@oracle.com>

On 10/27/2015 06:13 PM, Alexey Kodanev wrote:
> The test compares cubic and dctcp congestion control algorithms
> performance. One of the hosts emulates packets congestion with netem
> loss 0.03%. Also ECN is enabled on the host, which is required
> for dctcp algorithm to work properly.

The patch applied, also added a kernel version check to exit with TCONF if
kernel < 3.18.

Thanks,
Alexey

> Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
> ---
>   runtest/network_stress.features    |    3 +
>   testcases/network/dctcp/Makefile   |   22 ++++++++
>   testcases/network/dctcp/dctcp01.sh |  100 ++++++++++++++++++++++++++++++++++++
>   3 files changed, 125 insertions(+), 0 deletions(-)
>   create mode 100644 testcases/network/dctcp/Makefile
>   create mode 100755 testcases/network/dctcp/dctcp01.sh
>
> diff --git a/runtest/network_stress.features b/runtest/network_stress.features
> index 668f3da..bb907e5 100644
> --- a/runtest/network_stress.features
> +++ b/runtest/network_stress.features
> @@ -31,3 +31,6 @@ ipvlan01 ipvlan01.sh
>   
>   gre_ipv4_01 gre01.sh
>   gre_ipv6_01 gre01.sh -6
> +
> +dctcp_ipv4_01 dctcp01.sh
> +dctcp_ipv6_01 dctcp01.sh -6
> diff --git a/testcases/network/dctcp/Makefile b/testcases/network/dctcp/Makefile
> new file mode 100644
> index 0000000..82a6262
> --- /dev/null
> +++ b/testcases/network/dctcp/Makefile
> @@ -0,0 +1,22 @@
> +# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program. If not, see <http://www.gnu.org/licenses/>.
> +
> +top_srcdir		?= ../../..
> +
> +include $(top_srcdir)/include/mk/env_pre.mk
> +
> +INSTALL_TARGETS		:= dctcp01.sh
> +
> +include $(top_srcdir)/include/mk/generic_leaf_target.mk
> diff --git a/testcases/network/dctcp/dctcp01.sh b/testcases/network/dctcp/dctcp01.sh
> new file mode 100755
> index 0000000..7181abc
> --- /dev/null
> +++ b/testcases/network/dctcp/dctcp01.sh
> @@ -0,0 +1,100 @@
> +#!/bin/sh
> +# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program. If not, see <http://www.gnu.org/licenses/>.
> +#
> +# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
> +
> +TCID=dctcp01
> +TST_TOTAL=1
> +TST_CLEANUP="cleanup"
> +def_alg="cubic"
> +prev_alg=
> +
> +. test_net.sh
> +
> +set_cong_alg()
> +{
> +	local alg=$1
> +	tst_resm TINFO "setting $alg"
> +
> +	ROD sysctl -q -w net.ipv4.tcp_congestion_control=$alg
> +	tst_rhost_run -s -c "sysctl -q -w net.ipv4.tcp_congestion_control=$alg"
> +}
> +
> +cleanup()
> +{
> +	if [ "$prev_cong_ctl" ]; then
> +		sysctl -q -w net.ipv4.tcp_congestion_control=$prev_alg
> +		tst_rhost_run -c \
> +			"sysctl -q -w net.ipv4.tcp_congestion_control=$prev_alg"
> +	fi
> +	tst_rmdir
> +	tc qdisc del dev $(tst_iface) root netem loss 0.03% ecn
> +}
> +
> +setup()
> +{
> +	tst_require_root
> +	tst_check_cmds ip sysctl tc
> +
> +	tst_resm TINFO "emulate congestion with packet loss 0.03% and ECN"
> +	tc qdisc add dev $(tst_iface) root netem loss 0.03% ecn > /dev/null 2>&1
> +	if [ $? -ne 0 ]; then
> +		tst_brkm TCONF "netem doesn't support ECN"
> +	fi
> +
> +	tst_tmpdir
> +
> +	prev_alg="$(cat /proc/sys/net/ipv4/tcp_congestion_control)"
> +}
> +
> +test_run()
> +{
> +	tst_resm TINFO "compare '$def_alg' and 'dctcp' congestion alg. results"
> +
> +	set_cong_alg "$def_alg"
> +
> +	tst_netload $(tst_ipaddr rhost) tfo_res TFO
> +	if [ $? -ne 0 ]; then
> +		tst_resm TFAIL "test with '$def_alg' has failed"
> +		return
> +	fi
> +	local res0="$(cat tfo_res)"
> +	tst_resm TINFO "$def_alg time '$res0' ms"
> +
> +	set_cong_alg "dctcp"
> +
> +	tst_netload $(tst_ipaddr rhost) tfo_res TFO
> +	if [ $? -ne 0 ]; then
> +		tst_resm TFAIL "test with 'dctcp' has failed"
> +		return
> +	fi
> +	local res1="$(cat tfo_res)"
> +	tst_resm TINFO "dctcp time '$res1' ms"
> +
> +	local per=$(( $res0 * 100 / $res1 - 100 ))
> +
> +	if [ "$per" -lt "10" ]; then
> +		tst_resm TFAIL "dctcp performance $per %"
> +	else
> +		tst_resm TPASS "dctcp performance $per %"
> +	fi
> +}
> +
> +setup
> +
> +test_run
> +
> +tst_exit


      reply	other threads:[~2015-12-15 11:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-27 15:13 [LTP] [PATCH] network/dctcp: add dctcp congestion control algorithm test Alexey Kodanev
2015-12-15 11:57 ` Alexey Kodanev [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56700019.9020502@oracle.com \
    --to=alexey.kodanev@oracle.com \
    --cc=ltp@lists.linux.it \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.