From: chenfeng <puck.chen@hisilicon.com>
To: <lee.jones@linaro.org>, <linux-kernel@vger.kernel.org>,
<lgirdwood@gmail.com>, <broonie@kernel.org>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
<xuwei5@hisilicon.com>, <puck.chen@aliyun.com>,
<yudongbin@hisilicon.com>, <saberlily.xia@hisilicon.com>,
<suzhuangluan@hisilicon.com>, <kong.kongxinwei@hisilicon.com>,
<xuyiping@hisilicon.com>, <z.liuxinliang@hisilicon.com>,
<weidong2@hisilicon.com>, <w.f@huawei.com>
Cc: <qijiwen@hisilicon.com>, <peter.panshilin@hisilicon.com>,
<dan.zhao@hisilicon.com>, <linuxarm@huawei.com>
Subject: Re: [PATCH v3 5/5] hisilicon/dts: Add hi655x pmic dts node
Date: Thu, 17 Dec 2015 11:27:27 +0800 [thread overview]
Message-ID: <56722B9F.8090301@hisilicon.com> (raw)
In-Reply-To: <1450184056-79851-6-git-send-email-puck.chen@hisilicon.com>
Mark,
+- regulator-vset-regs: Voltage set register offset.
+- regulator-vset-mask: voltage set control mask.
+- regulator-n-vol: The num of support voltages.
+- regulator-vset-table: The table of support voltages.
> Why is this in the binding? This is a binding for a specific device,
> there is no point in putting all these data tables in the DT - it just
> bloats the DT and makes it harder for us to enhance our support for this
> device in the future.
You mentioned in previous version,I I have some questions for it.
This regulator-vset-regs etc are vendor specific describe. The hi655x PMIC
is a series of chips. They all have this value, but the offset may be different.
And we can generate the dts file from excel which is defined by SOC.
I think the dts is designed to distinguish different platform. If we hard code this
in files, it may be also different to use as common in next chip version.
I will appreciate it if you can give me some suggestions.
On 2015/12/15 20:54, Chen Feng wrote:
> Add dts node for hi665x MFD and regulator driver
>
> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
> Signed-off-by: Fei Wang <w.f@huawei.com>
> Tested-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 178 ++++++++++++++++++++++++++++++
> 1 file changed, 178 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..5f98a72 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,183 @@
> clock-names = "uartclk", "apb_pclk";
> status = "disabled";
> };
> + pmic: pmic@F8000000 {
> + compatible = "hisilicon,hi655x-pmic";
> + reg = <0x0 0xf8000000 0x0 0x1000>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + pmic-gpios = <&gpio_pmu_irq_n>;
> + status = "okay";
> + ldo2: regulator@a21 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-valid-modes-mask = <0x02>;
> + regulator-enable-ramp-delay = <120>;
> + regulator-ctrl-regs = <0x029 0x02a 0x02b>;
> + regulator-ctrl-mask = <0x1>;
> + regulator-vset-regs = <0x072>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <2500000>,<2600000>,
> + <2700000>,<2800000>,
> + <2900000>,<3000000>,
> + <3100000>,<3200000>;
> + };
> + ldo7: regulator@a26 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo7";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-valid-modes-mask = <0x0a>;
> + regulator-enable-ramp-delay = <120>;
> + regulator-ctrl-regs = <0x029 0x02a 0x02b>;
> + regulator-ctrl-mask = <0x6>;
> + regulator-vset-regs = <0x078>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <1800000>,<1850000>,
> + <2850000>,<2900000>,
> + <3000000>,<3100000>,
> + <3200000>,<3300000>;
> + };
> + ldo10: regulator@a29 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-valid-modes-mask = <0x0a>;
> + regulator-enable-ramp-delay = <360>;
> + regulator-ctrl-regs = <0x02c 0x02d 0x02e>;
> + regulator-ctrl-mask = <0x1>;
> + regulator-vset-regs = <0x07b>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <1800000>,<1850000>,
> + <1900000>,<2750000>,
> + <2800000>,<2850000>,
> + <2900000>,<3000000>;
> + };
> + ldo13: regulator@a32 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo13";
> + regulator-min-microvolt = <1600000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-enable-ramp-delay = <120>;
> + regulator-ctrl-regs = <0x02c 0x02d 0x02e>;
> + regulator-ctrl-mask = <0x4>;
> + regulator-vset-regs = <0x07e>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <1600000>,<1650000>,
> + <1700000>,<1750000>,
> + <1800000>,<1850000>,
> + <1900000>,<1950000>;
> + };
> + ldo14: regulator@a33 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo14";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-enable-ramp-delay = <120>;
> + regulator-ctrl-regs = <0x02c 0x02d 0x02e>;
> + regulator-ctrl-mask = <0x5>;
> + regulator-vset-regs = <0x07f>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <2500000>,<2600000>,
> + <2700000>,<2800000>,
> + <2900000>,<3000000>,
> + <3100000>,<3200000>;
> + };
> + ldo15: regulator@a34 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo15";
> + regulator-min-microvolt = <1600000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-enable-ramp-delay = <120>;
> + regulator-ctrl-regs = <0x02c 0x02d 0x02e>;
> + regulator-ctrl-mask = <0x6>;
> + regulator-vset-regs = <0x080>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <1600000>,<1650000>,
> + <1700000>,<1750000>,
> + <1800000>,<1850000>,
> + <1900000>,<1950000>;
> + };
> + ldo17: regulator@a36 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo17";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-enable-ramp-delay = <120>;
> + regulator-ctrl-regs = <0x02f 0x030 0x031>;
> + regulator-ctrl-mask = <0x0>;
> + regulator-vset-regs = <0x082>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <2500000>,<2600000>,
> + <2700000>,<2800000>,
> + <2900000>,<3000000>,
> + <3100000>,<3200000>;
> + };
> + ldo19: regulator@a38 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo19";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <360>;
> + regulator-ctrl-regs = <0x02f 0x030 0x031>;
> + regulator-ctrl-mask = <0x2>;
> + regulator-vset-regs = <0x084>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <1800000>,<1850000>,
> + <1900000>,<2750000>,
> + <2800000>,<2850000>,
> + <2900000>,<3000000>;
> + };
> + ldo21: regulator@a40 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo21";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + regulator-valid-modes-mask = <0x02>;
> + regulator-enable-ramp-delay = <120>;
> + regulator-ctrl-regs = <0x02f 0x030 0x031>;
> + regulator-ctrl-mask = <0x4>;
> + regulator-vset-regs = <0x086>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <1650000>,<1700000>,
> + <1750000>,<1800000>,
> + <1850000>,<1900000>,
> + <1950000>,<2000000>;
> + };
> + ldo22: regulator@a41 {
> + compatible = "hisilicon,hi655x-regulator-pmic";
> + regulator-name = "ldo22";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-valid-modes-mask = <0x02>;
> + regulator-enable-ramp-delay = <120>;
> + regulator-ctrl-regs = <0x02f 0x030 0x031>;
> + regulator-ctrl-mask = <0x5>;
> + regulator-vset-regs = <0x087>;
> + regulator-vset-mask = <0x7>;
> + regulator-n-vol = <8>;
> + regulator-vset-table = <900000>,<1000000>,
> + <1050000>,<1100000>,
> + <1150000>,<1175000>,
> + <1185000>,<1200000>;
> + };
> + };
> };
> };
>
next prev parent reply other threads:[~2015-12-17 3:34 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 12:54 [PATCH v3 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng
2015-12-15 12:54 ` [PATCH v3 1/5] doc: bindings: Add document for mfd hi665x PMIC Chen Feng
2015-12-15 12:54 ` [PATCH v3 2/5] doc: bindings: Document for hi655x regulator driver Chen Feng
2015-12-15 12:54 ` [PATCH v3 3/5] mfd: hi655x: Add hi665x pmic driver Chen Feng
2015-12-15 13:29 ` [PATCH] mfd: hi655x: fix platform_no_drv_owner.cocci warnings kbuild test robot
2015-12-15 13:29 ` [PATCH v3 3/5] mfd: hi655x: Add hi665x pmic driver kbuild test robot
2015-12-15 12:54 ` [PATCH v3 4/5] regulator: add regulator driver of hi655x PMIC Chen Feng
2015-12-16 19:16 ` Mark Brown
2015-12-17 3:18 ` chenfeng
2015-12-15 12:54 ` [PATCH v3 5/5] hisilicon/dts: Add hi655x pmic dts node Chen Feng
2015-12-17 3:27 ` chenfeng [this message]
2015-12-18 17:58 ` Mark Brown
2015-12-21 3:01 ` chenfeng
2015-12-21 6:20 ` chenfeng
2015-12-23 0:46 ` Mark Brown
2015-12-24 2:43 ` chenfeng
2015-12-22 16:08 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56722B9F.8090301@hisilicon.com \
--to=puck.chen@hisilicon.com \
--cc=broonie@kernel.org \
--cc=dan.zhao@hisilicon.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kong.kongxinwei@hisilicon.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=peter.panshilin@hisilicon.com \
--cc=puck.chen@aliyun.com \
--cc=qijiwen@hisilicon.com \
--cc=robh+dt@kernel.org \
--cc=saberlily.xia@hisilicon.com \
--cc=suzhuangluan@hisilicon.com \
--cc=w.f@huawei.com \
--cc=weidong2@hisilicon.com \
--cc=xuwei5@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=yudongbin@hisilicon.com \
--cc=z.liuxinliang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.