From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 07/11] drm/i915: i915_vma_move_to_active prep patch
Date: Thu, 17 Dec 2015 12:04:26 +0000 [thread overview]
Message-ID: <5672A4CA.5010900@linux.intel.com> (raw)
In-Reply-To: <1450093012-14955-7-git-send-email-chris@chris-wilson.co.uk>
On 14/12/15 11:36, Chris Wilson wrote:
> This patch is broken out of the next just to remove the code motion from
> that patch and make it more readable. What we do here is move the
> i915_vma_move_to_active() to i915_gem_execbuffer.c and put the three
> stages (read, write, fenced) together so that future modifications to
> active handling are all located in the same spot. The importance of this
> is so that we can more simply control the order in which the requests
> are place in the retirement list (i.e. control the order at which we
> retire and so control the lifetimes to avoid having to hold onto
> references).
>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 3 +-
> drivers/gpu/drm/i915/i915_gem.c | 15 -------
> drivers/gpu/drm/i915/i915_gem_context.c | 7 ++--
> drivers/gpu/drm/i915/i915_gem_execbuffer.c | 63 ++++++++++++++++++----------
> drivers/gpu/drm/i915/i915_gem_render_state.c | 2 +-
> 5 files changed, 49 insertions(+), 41 deletions(-)
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Regards,
Tvrtko
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index b32a00f60e98..eb775eb1c693 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2775,7 +2775,8 @@ int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
> int i915_gem_object_sync(struct drm_i915_gem_object *obj,
> struct drm_i915_gem_request *to);
> void i915_vma_move_to_active(struct i915_vma *vma,
> - struct drm_i915_gem_request *req);
> + struct drm_i915_gem_request *req,
> + unsigned flags);
> int i915_gem_dumb_create(struct drm_file *file_priv,
> struct drm_device *dev,
> struct drm_mode_create_dumb *args);
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 144e92df8137..8a824c5d5348 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -2016,21 +2016,6 @@ void *i915_gem_object_pin_vmap(struct drm_i915_gem_object *obj)
> return obj->vmapping;
> }
>
> -void i915_vma_move_to_active(struct i915_vma *vma,
> - struct drm_i915_gem_request *req)
> -{
> - struct drm_i915_gem_object *obj = vma->obj;
> - struct intel_engine_cs *engine = req->engine;
> -
> - /* Add a reference if we're newly entering the active list. */
> - if (obj->active == 0)
> - drm_gem_object_reference(&obj->base);
> - obj->active |= intel_engine_flag(engine);
> -
> - i915_gem_request_mark_active(req, &obj->last_read[engine->id]);
> - list_move_tail(&vma->vm_link, &vma->vm->active_list);
> -}
> -
> static void
> i915_gem_object_retire__fence(struct drm_i915_gem_request_active *active,
> struct drm_i915_gem_request *req)
> diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
> index dcb4603a7f03..c4a8a64cd1b2 100644
> --- a/drivers/gpu/drm/i915/i915_gem_context.c
> +++ b/drivers/gpu/drm/i915/i915_gem_context.c
> @@ -766,8 +766,8 @@ static int do_switch(struct drm_i915_gem_request *req)
> * MI_SET_CONTEXT instead of when the next seqno has completed.
> */
> if (from != NULL) {
> - from->legacy_hw_ctx.rcs_state->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
> - i915_vma_move_to_active(i915_gem_obj_to_ggtt(from->legacy_hw_ctx.rcs_state), req);
> + struct drm_i915_gem_object *obj = from->legacy_hw_ctx.rcs_state;
> +
> /* As long as MI_SET_CONTEXT is serializing, ie. it flushes the
> * whole damn pipeline, we don't need to explicitly mark the
> * object dirty. The only exception is that the context must be
> @@ -775,7 +775,8 @@ static int do_switch(struct drm_i915_gem_request *req)
> * able to defer doing this until we know the object would be
> * swapped, but there is no way to do that yet.
> */
> - from->legacy_hw_ctx.rcs_state->dirty = 1;
> + obj->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
> + i915_vma_move_to_active(i915_gem_obj_to_ggtt(obj), req, 0);
>
> /* obj is kept alive until the next request by its active ref */
> i915_gem_object_ggtt_unpin(from->legacy_hw_ctx.rcs_state);
> diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
> index 6788f71ad989..6de8681bb64c 100644
> --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
> +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
> @@ -1064,6 +1064,44 @@ i915_gem_validate_context(struct drm_device *dev, struct drm_file *file,
> return ctx;
> }
>
> +void i915_vma_move_to_active(struct i915_vma *vma,
> + struct drm_i915_gem_request *req,
> + unsigned flags)
> +{
> + struct drm_i915_gem_object *obj = vma->obj;
> + const unsigned engine = req->engine->id;
> +
> + RQ_BUG_ON(!drm_mm_node_allocated(&vma->node));
> +
> + obj->dirty = 1; /* be paranoid */
> +
> + /* Add a reference if we're newly entering the active list. */
> + if (obj->active == 0)
> + drm_gem_object_reference(&obj->base);
> + obj->active |= 1 << engine;
> + i915_gem_request_mark_active(req, &obj->last_read[engine]);
> +
> + if (flags & EXEC_OBJECT_WRITE) {
> + i915_gem_request_mark_active(req, &obj->last_write);
> +
> + intel_fb_obj_invalidate(obj, ORIGIN_CS);
> +
> + /* update for the implicit flush after a batch */
> + obj->base.write_domain &= ~I915_GEM_GPU_DOMAINS;
> + }
> +
> + if (flags & EXEC_OBJECT_NEEDS_FENCE) {
> + i915_gem_request_mark_active(req, &obj->last_fence);
> + if (flags & __EXEC_OBJECT_HAS_FENCE) {
> + struct drm_i915_private *dev_priv = req->i915;
> + list_move_tail(&dev_priv->fence_regs[obj->fence_reg].lru_list,
> + &dev_priv->mm.fence_list);
> + }
> + }
> +
> + list_move_tail(&vma->vm_link, &vma->vm->active_list);
> +}
> +
> static void
> i915_gem_execbuffer_move_to_active(struct list_head *vmas,
> struct drm_i915_gem_request *req)
> @@ -1071,35 +1109,18 @@ i915_gem_execbuffer_move_to_active(struct list_head *vmas,
> struct i915_vma *vma;
>
> list_for_each_entry(vma, vmas, exec_list) {
> - struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
> struct drm_i915_gem_object *obj = vma->obj;
> u32 old_read = obj->base.read_domains;
> u32 old_write = obj->base.write_domain;
>
> - obj->dirty = 1; /* be paranoid */
> obj->base.write_domain = obj->base.pending_write_domain;
> - if (obj->base.write_domain == 0)
> + if (obj->base.write_domain)
> + vma->exec_entry->flags |= EXEC_OBJECT_WRITE;
> + else
> obj->base.pending_read_domains |= obj->base.read_domains;
> obj->base.read_domains = obj->base.pending_read_domains;
>
> - i915_vma_move_to_active(vma, req);
> - if (obj->base.write_domain) {
> - i915_gem_request_mark_active(req, &obj->last_write);
> -
> - intel_fb_obj_invalidate(obj, ORIGIN_CS);
> -
> - /* update for the implicit flush after a batch */
> - obj->base.write_domain &= ~I915_GEM_GPU_DOMAINS;
> - }
> - if (entry->flags & EXEC_OBJECT_NEEDS_FENCE) {
> - i915_gem_request_mark_active(req, &obj->last_fence);
> - if (entry->flags & __EXEC_OBJECT_HAS_FENCE) {
> - struct drm_i915_private *dev_priv = req->i915;
> - list_move_tail(&dev_priv->fence_regs[obj->fence_reg].lru_list,
> - &dev_priv->mm.fence_list);
> - }
> - }
> -
> + i915_vma_move_to_active(vma, req, vma->exec_entry->flags);
> trace_i915_gem_object_change_domain(obj, old_read, old_write);
> }
> }
> diff --git a/drivers/gpu/drm/i915/i915_gem_render_state.c b/drivers/gpu/drm/i915/i915_gem_render_state.c
> index 630e748c991d..d5a87c4ff0f7 100644
> --- a/drivers/gpu/drm/i915/i915_gem_render_state.c
> +++ b/drivers/gpu/drm/i915/i915_gem_render_state.c
> @@ -221,7 +221,7 @@ int i915_gem_render_state_init(struct drm_i915_gem_request *req)
> goto out;
> }
>
> - i915_vma_move_to_active(i915_gem_obj_to_ggtt(so.obj), req);
> + i915_vma_move_to_active(i915_gem_obj_to_ggtt(so.obj), req, 0);
>
> out:
> i915_gem_render_state_fini(&so);
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-12-17 12:04 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-14 11:36 [PATCH 01/11] drm/i915: Introduce drm_i915_gem_request_node for request tracking Chris Wilson
2015-12-14 11:36 ` [PATCH 02/11] drm/i915: Refactor activity tracking for requests Chris Wilson
2015-12-16 17:16 ` Tvrtko Ursulin
2015-12-16 17:31 ` Chris Wilson
2015-12-14 11:36 ` [PATCH 03/11] drm/i915: Rename vma->*_list to *_link for consistency Chris Wilson
2015-12-17 11:14 ` Tvrtko Ursulin
2015-12-17 11:24 ` Chris Wilson
2015-12-17 11:45 ` Chris Wilson
2015-12-14 11:36 ` [PATCH 04/11] drm/i915: Amalgamate GGTT/ppGTT vma debug list walkers Chris Wilson
2015-12-17 11:21 ` Tvrtko Ursulin
2015-12-14 11:36 ` [PATCH 05/11] drm/i915: Reduce the pointer dance of i915_is_ggtt() Chris Wilson
2015-12-17 11:31 ` Tvrtko Ursulin
2015-12-14 11:36 ` [PATCH 06/11] drm/i915: Store owning file on the i915_address_space Chris Wilson
2015-12-17 11:52 ` Tvrtko Ursulin
2015-12-17 13:25 ` Chris Wilson
2015-12-14 11:36 ` [PATCH 07/11] drm/i915: i915_vma_move_to_active prep patch Chris Wilson
2015-12-17 12:04 ` Tvrtko Ursulin [this message]
2015-12-14 11:36 ` [PATCH 08/11] drm/i915: Track active vma requests Chris Wilson
2015-12-17 12:26 ` Tvrtko Ursulin
2015-12-14 11:36 ` [PATCH 09/11] drm/i915: Release vma when the handle is closed Chris Wilson
2015-12-17 13:46 ` Tvrtko Ursulin
2015-12-17 14:11 ` Chris Wilson
2015-12-17 14:21 ` Chris Wilson
2015-12-17 14:32 ` Tvrtko Ursulin
2015-12-14 11:36 ` [PATCH 10/11] drm/i915: Mark the context and address space as closed Chris Wilson
2015-12-17 12:37 ` Tvrtko Ursulin
2015-12-17 12:39 ` Tvrtko Ursulin
2015-12-17 12:48 ` Chris Wilson
2015-12-17 13:26 ` Tvrtko Ursulin
2015-12-17 14:15 ` Tvrtko Ursulin
2015-12-17 14:26 ` Chris Wilson
2015-12-17 14:35 ` Tvrtko Ursulin
2015-12-14 11:36 ` [PATCH 11/11] Revert "drm/i915: Clean up associated VMAs on context destruction" Chris Wilson
2015-12-14 15:58 ` [PATCH 01/11] drm/i915: Introduce drm_i915_gem_request_node for request tracking Tvrtko Ursulin
2015-12-14 16:11 ` Chris Wilson
2015-12-15 10:51 ` [PATCH v2] drm/i915: Introduce drm_i915_gem_request_active " Chris Wilson
2015-12-17 14:48 ` ✗ failure: UK.CI.checkpatch.pl Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5672A4CA.5010900@linux.intel.com \
--to=tvrtko.ursulin@linux.intel.com \
--cc=chris@chris-wilson.co.uk \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.