From: Marcel Apfelbaum <marcel@redhat.com>
To: Cao jin <caoj.fnst@cn.fujitsu.com>, qemu-devel@nongnu.org
Cc: pbonzini@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3] PXB: convert to realize()
Date: Tue, 22 Dec 2015 16:11:15 +0200 [thread overview]
Message-ID: <56795A03.4060409@redhat.com> (raw)
In-Reply-To: <1450788622-9132-1-git-send-email-caoj.fnst@cn.fujitsu.com>
On 12/22/2015 02:50 PM, Cao jin wrote:
> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
> ---
> v3 changelog:
> 1. As per Paolo`s review, also Marcel`s test suggestion, just unparent bus
> object while unref the ds & bds object
>
> hw/pci-bridge/pci_expander_bridge.c | 33 +++++++++++++++++++--------------
> 1 file changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
> index 57f8a37..7db6a78 100644
> --- a/hw/pci-bridge/pci_expander_bridge.c
> +++ b/hw/pci-bridge/pci_expander_bridge.c
> @@ -145,25 +145,23 @@ static const TypeInfo pxb_host_info = {
> * Returns 0 on successs, -1 if i440fx host was not
> * found or the bus number is already in use.
> */
> -static int pxb_register_bus(PCIDevice *dev, PCIBus *pxb_bus)
> +static void pxb_register_bus(PCIDevice *dev, PCIBus *pxb_bus, Error **errp)
> {
> PCIBus *bus = dev->bus;
> int pxb_bus_num = pci_bus_num(pxb_bus);
>
> if (bus->parent_dev) {
> - error_report("PXB devices can be attached only to root bus.");
> - return -1;
> + error_setg(errp, "PXB devices can be attached only to root bus.");
> + return;
> }
>
> QLIST_FOREACH(bus, &bus->child, sibling) {
> if (pci_bus_num(bus) == pxb_bus_num) {
> - error_report("Bus %d is already in use.", pxb_bus_num);
> - return -1;
> + error_setg(errp, "Bus %d is already in use.", pxb_bus_num);
> + return;
> }
> }
> QLIST_INSERT_HEAD(&dev->bus->child, pxb_bus, sibling);
> -
> - return 0;
> }
>
> static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
> @@ -193,7 +191,7 @@ static gint pxb_compare(gconstpointer a, gconstpointer b)
> 0;
> }
>
> -static int pxb_dev_initfn(PCIDevice *dev)
> +static void pxb_dev_realize(PCIDevice *dev, Error **errp)
> {
> PXBDev *pxb = PXB_DEV(dev);
> DeviceState *ds, *bds;
> @@ -202,8 +200,8 @@ static int pxb_dev_initfn(PCIDevice *dev)
>
> if (pxb->numa_node != NUMA_NODE_UNASSIGNED &&
> pxb->numa_node >= nb_numa_nodes) {
> - error_report("Illegal numa node %d.", pxb->numa_node);
> - return -EINVAL;
> + error_setg(errp, "Illegal numa node %d.", pxb->numa_node);
> + return;
> }
>
> if (dev->qdev.id && *dev->qdev.id) {
> @@ -225,8 +223,9 @@ static int pxb_dev_initfn(PCIDevice *dev)
>
> PCI_HOST_BRIDGE(ds)->bus = bus;
>
> - if (pxb_register_bus(dev, bus)) {
> - return -EINVAL;
> + pxb_register_bus(dev, bus, errp);
> + if (*errp) {
> + goto err_register_bus;
> }
>
> qdev_init_nofail(ds);
> @@ -237,7 +236,13 @@ static int pxb_dev_initfn(PCIDevice *dev)
> pci_config_set_class(dev->config, PCI_CLASS_BRIDGE_HOST);
>
> pxb_dev_list = g_list_insert_sorted(pxb_dev_list, pxb, pxb_compare);
> - return 0;
> +
> + return;
> +
> +err_register_bus:
> + object_unref(OBJECT(bds));
> + object_unparent(OBJECT(bus));
> + object_unref(OBJECT(ds));
> }
>
> static void pxb_dev_exitfn(PCIDevice *pci_dev)
> @@ -259,7 +264,7 @@ static void pxb_dev_class_init(ObjectClass *klass, void *data)
> DeviceClass *dc = DEVICE_CLASS(klass);
> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
>
> - k->init = pxb_dev_initfn;
> + k->realize = pxb_dev_realize;
> k->exit = pxb_dev_exitfn;
> k->vendor_id = PCI_VENDOR_ID_REDHAT;
> k->device_id = PCI_DEVICE_ID_REDHAT_PXB;
>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Thanks,
Marcel
next prev parent reply other threads:[~2015-12-22 14:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-22 12:50 [Qemu-devel] [PATCH v3] PXB: convert to realize() Cao jin
2015-12-22 14:11 ` Marcel Apfelbaum [this message]
2016-01-10 7:27 ` Cao jin
2016-01-11 15:44 ` Markus Armbruster
-- strict thread matches above, loose matches on Subject: below --
2015-12-22 11:48 Cao jin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56795A03.4060409@redhat.com \
--to=marcel@redhat.com \
--cc=caoj.fnst@cn.fujitsu.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.