From: Luka Karinja <luka.karinja@gmail.com>
To: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: Re: [PATCH 18/19] ASoC: Intel: Atom: add support for RT5642
Date: Tue, 22 Dec 2015 18:48:44 +0100 [thread overview]
Message-ID: <56798CFC.7040909@gmail.com> (raw)
In-Reply-To: <5679871B.1050200@gmail.com>
> The machine driver is not loaded when the BIOS uses the 10EC5642
> _HID. Add it to the white list of known _HIDs, codec_name is
> already taken care of by previous commit
>
> Tested on Asus T100TAF.
>
I'm trying to get sound working on my T100TAF i did apply all the 19 patches
on top of broonie/sound and added UCM files to my system.
Does the TAF need different UCM file than the T100TA?
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: bytcrrt5640 [bytcr-rt5640], device 0: Baytrail Audio (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: bytcrrt5640 [bytcr-rt5640], device 1: Deep-Buffer Audio (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
dmesg:
[ 5.209239] Adding 1049596k swap on /dev/mmcblk0p4. Priority:-1
extents:1 across:1049596k SSFS
[ 5.219099] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.273802] i2c i2c-10: Added multiplexed i2c bus 13
[ 5.274629] intel_sst_acpi 80860F28:00: LPE base: 0x50a00000
size:0x200000
[ 5.274638] intel_sst_acpi 80860F28:00: IRAM base: 0x50ac0000
[ 5.274671] intel_sst_acpi 80860F28:00: DRAM base: 0x50b00000
[ 5.274685] intel_sst_acpi 80860F28:00: SHIM base: 0x50b40000
[ 5.274700] intel_sst_acpi 80860F28:00: Mailbox base: 0x50b44000
[ 5.274712] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[ 5.274842] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[ 5.290156] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.311924] random: nonblocking pool is initialized
[ 5.397912] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: data=ordered
[ 5.506882] genirq: Flags mismatch irq 8. 00000083 (volume_down) vs.
00000000 (rtc0)
[ 5.507025] gpio-keys gpio-keys.0.auto: Unable to claim irq 8; error -16
[ 5.507283] gpio-keys: probe of gpio-keys.0.auto failed with error -16
[ 5.507518] input: gpio-keys as
/devices/platform/gpio-keys.1.auto/input/input8
[ 5.519513] iTCO_vendor_support: vendor-support=0
[ 5.591021] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.591153] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3,
TCOBASE=0x0460)
[ 5.604447] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.613586] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
media-cpu-dai mapping ok
[ 5.613794] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
deepbuffer-cpu-dai mapping ok
[ 5.613922] compress asoc: snd-soc-dummy-dai <-> compress-cpu-dai
mapping ok
[ 5.615555] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp2-port
mapping ok
[ 5.642183] asus_wmi: ASUS WMI generic driver loaded
[ 5.663786] usbcore: registered new interface driver usbmouse
[ 5.665362] usbcore: registered new interface driver usbkbd
[ 5.681990] asus_wmi: Initialization: 0x1
[ 5.682121] asus_wmi: BIOS WMI version: 7.9
[ 5.682219] asus_wmi: SFUN value: 0x37
[ 5.685337] input: Asus WMI hotkeys as
/devices/platform/asus-nb-wmi/input/input9
[ 5.708007] asus_wmi: Number of fans: 1
[ 5.801413] sst-mfld-platform sst-mfld-platform: Slot control:
codec_out tx interleaver slot 0 doesn't have DAPM widget!!!
[ 5.801529] input: SIS0817:00 0457:1071 as
/devices/platform/80860F41:03/i2c-11/i2c-SIS0817:00/0018:0457:1071.0004/input/input10
[ 5.802167] hid-multitouch 0018:0457:1071.0004: input,hidraw3: I2C
HID v1.00 Device [SIS0817:00 0457:1071] on i2c-SIS0817:00
[ 5.816775] sst-mfld-platform sst-mfld-platform: Slot control:
codec_out tx interleaver slot 1 doesn't have DAPM widget!!!
[ 5.816996] sst-mfld-platform sst-mfld-platform: Slot control:
codec_out tx interleaver slot 2 doesn't have DAPM widget!!!
[ 5.817204] sst-mfld-platform sst-mfld-platform: Slot control:
codec_out tx interleaver slot 3 doesn't have DAPM widget!!!
[ 5.817405] sst-mfld-platform sst-mfld-platform: Slot control:
codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!!
[ 5.817616] sst-mfld-platform sst-mfld-platform: Slot control:
codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!!
[ 5.818884] sst-mfld-platform sst-mfld-platform: Slot control:
codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!!
[ 5.819109] sst-mfld-platform sst-mfld-platform: Slot control:
codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!!
[ 5.911351] sst-mfld-platform sst-mfld-platform: Slot control:
codec_out tx interleaver slot 0 doesn't have DAPM widget!!!
[ 5.911578] sst-mfld-platform sst-mfld-platform: Slot control:
codec_out tx interleaver slot 1 doesn't have DAPM widget!!!
[ 5.911787] sst-mfld-platform sst-mfld-platform: Slot control:
codec_out tx interleaver slot 2 doesn't have DAPM widget!!!
[ 5.911997] sst-mfld-platform sst-mfld-platform: Slot control:
codec_out tx interleaver slot 3 doesn't have DAPM widget!!!
[ 5.912201] sst-mfld-platform sst-mfld-platform: Slot control:
codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!!
[ 5.912417] sst-mfld-platform sst-mfld-platform: Slot control:
codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!!
[ 5.912634] sst-mfld-platform sst-mfld-platform: Slot control:
codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!!
[ 5.915142] sst-mfld-platform sst-mfld-platform: Slot control:
codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!!
[ 6.042680] intel_rapl: Found RAPL domain package
[ 6.042692] intel_rapl: Found RAPL domain core
[ 6.247467] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.247489] Bluetooth: BNEP filters: protocol multicast
[ 6.247515] Bluetooth: BNEP socket layer initialized
[ 7.524852] brcmf_sdio_drivestrengthinit: No SDIO Drive strength init
done for chip 43340 rev 2 pmurev 20
[ 7.525341] usbcore: registered new interface driver brcmfmac
[ 7.722004] brcmf_c_preinit_dcmds: Firmware version = wl0: Jun 17
2014 11:48:43 version 6.10.190.49 (r485840) FWID 01-8744bcd2
[ 7.739335] brcmf_cfg80211_reg_notifier: not a ISO3166 code
[ 7.899345] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.921532] audit: type=1006 audit(1450805770.516:2): pid=1018 uid=0
old-auid=4294967295 auid=1000 old-ses=4294967295 ses=1 res=1
[ 7.984230] audit: type=1006 audit(1450805770.580:3): pid=1091 uid=0
old-auid=4294967295 auid=1000 old-ses=4294967295 ses=2 res=1
[ 7.996410] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.151283] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.038571] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.245916] Bluetooth: hci1: BCM: chip id 82
[ 11.245928] Bluetooth: hci1: BCM43341B0 (002.001.014) build 0000
[ 11.755123] Bluetooth: hci1: BCM (002.001.014) build 0164
[ 14.513027] intel_sst_acpi 80860F28:00: Wait timed-out condition:0x0,
msg_id:0x0 fw_state 0x1
[ 14.513045] intel_sst_acpi 80860F28:00: fw download failed -16
[ 14.513067] intel_sst_acpi 80860F28:00: FW download fail -16
[ 14.513864] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.514676] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.515574] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.518058] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.518941] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.520293] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.525383] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.527248] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.528335] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
[ 14.534111] Baytrail Audio Port: ASoC: no backend DAIs enabled for
Baytrail Audio Port
next parent reply other threads:[~2015-12-22 17:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5679871B.1050200@gmail.com>
2015-12-22 17:48 ` Luka Karinja [this message]
2015-12-22 18:08 ` [PATCH 18/19] ASoC: Intel: Atom: add support for RT5642 Pierre-Louis Bossart
2015-12-22 18:38 ` Luka Karinja
2016-02-11 10:12 ` Luka Karinja
2016-02-11 14:00 ` Pierre-Louis Bossart
2015-12-18 2:35 [PATCH 00/19] Baytrail/Cherrytrail cleanups and fixes Pierre-Louis Bossart
2015-12-18 2:35 ` [PATCH 18/19] ASoC: Intel: Atom: add support for RT5642 Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56798CFC.7040909@gmail.com \
--to=luka.karinja@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=pierre-louis.bossart@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.