diff for duplicates of <56798F9C.8020304@kernel.org> diff --git a/a/1.txt b/N1/1.txt index 72478e3..13a582b 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -6,7 +6,7 @@ On 14/12/15 22:36, Andrew F. Davis wrote: > Data sheet located here: > http://www.ti.com/product/AFE4403/datasheet > -> Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +> Signed-off-by: Andrew F. Davis <afd@ti.com> I assume the plan is to break some of this out into a common shared 'helper' module for the two drivers? You will probably want to do that before we merge either of them. Again, doesn't look like @@ -39,7 +39,7 @@ the comments from one driver mostly apply to the other as well > + /sys/bus/iio/devices/iio:deviceX/tia_capacitanceY > +Date: December 2015 > +KernelVersion: -> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +> +Contact: Andrew F. Davis <afd@ti.com> > +Description: > + Get and set the resistance and the capacitance settings for the > + Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for @@ -56,7 +56,7 @@ userspace and you can create a single ABI document covering the two drivers. > +What: /sys/bus/iio/devices/iio:deviceX/tia_separate_en > +Date: December 2015 > +KernelVersion: -> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +> +Contact: Andrew F. Davis <afd@ti.com> > +Description: > + Enable or disable separate settings for the TransImpedance > + Amplifier above, when disabled both values are set by the @@ -66,7 +66,7 @@ userspace and you can create a single ABI document covering the two drivers. > + /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw > +Date: December 2015 > +KernelVersion: -> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +> +Contact: Andrew F. Davis <afd@ti.com> > +Description: > + Get measured values from the ADC for these stages. Y is the > + specific LED number. The values are expressed in 24-bit twos @@ -75,7 +75,7 @@ userspace and you can create a single ABI document covering the two drivers. > +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw > +Date: December 2015 > +KernelVersion: -> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +> +Contact: Andrew F. Davis <afd@ti.com> > +Description: > + Get differential values from the ADC for these stages. Y is the > + specific LED number. The values are expressed in 24-bit twos @@ -84,7 +84,7 @@ userspace and you can create a single ABI document covering the two drivers. > +What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw > +Date: December 2015 > +KernelVersion: -> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +> +Contact: Andrew F. Davis <afd@ti.com> > +Description: > + Get and set the LED current for the specified LED. Y is the > + specific LED number. @@ -137,7 +137,7 @@ we can combine this with the docs for the afe4404. > + * AFE4403 Heart Rate Monitors and Low-Cost Pulse Oximeters > + * > + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ -> + * Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +> + * Andrew F. Davis <afd@ti.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as @@ -848,7 +848,7 @@ wasn't ;) > +}; > +module_spi_driver(afe4403_spi_driver); > + -> +MODULE_AUTHOR("Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>"); +> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); > +MODULE_DESCRIPTION("TI AFE4403 Heart Rate and Pulse Oximeter"); > +MODULE_LICENSE("GPL"); > diff --git a/a/content_digest b/N1/content_digest index f48387d..b700139 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,22 +1,21 @@ "ref\01450132561-5245-1-git-send-email-afd@ti.com\0" "ref\01450132561-5245-6-git-send-email-afd@ti.com\0" - "ref\01450132561-5245-6-git-send-email-afd-l0cyMroinI0@public.gmane.org\0" - "From\0Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "From\0Jonathan Cameron <jic23@kernel.org>\0" "Subject\0Re: [PATCH v3 5/5] iio: health: Add driver for the TI AFE4403 heart monitor\0" "Date\0Tue, 22 Dec 2015 17:59:56 +0000\0" - "To\0Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>" - Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> - Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> - Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> - Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> - Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> - Hartmut Knaack <knaack.h-Mmb7MZpHnFY@public.gmane.org> - Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org> - " Peter Meerwald <pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org>\0" - "Cc\0devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" - linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - " linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\0" + "To\0Andrew F. Davis <afd@ti.com>" + Rob Herring <robh+dt@kernel.org> + Pawel Moll <pawel.moll@arm.com> + Mark Rutland <mark.rutland@arm.com> + Ian Campbell <ijc+devicetree@hellion.org.uk> + Kumar Gala <galak@codeaurora.org> + Hartmut Knaack <knaack.h@gmx.de> + Lars-Peter Clausen <lars@metafoo.de> + " Peter Meerwald <pmeerw@pmeerw.net>\0" + "Cc\0devicetree@vger.kernel.org" + linux-iio@vger.kernel.org + linux-api@vger.kernel.org + " linux-kernel@vger.kernel.org\0" "\00:1\0" "b\0" "On 14/12/15 22:36, Andrew F. Davis wrote:\n" @@ -27,7 +26,7 @@ "> Data sheet located here:\n" "> http://www.ti.com/product/AFE4403/datasheet\n" "> \n" - "> Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + "> Signed-off-by: Andrew F. Davis <afd@ti.com>\n" "I assume the plan is to break some of this out into a common shared\n" "'helper' module for the two drivers? You will probably want\n" "to do that before we merge either of them. Again, doesn't look like\n" @@ -60,7 +59,7 @@ "> +\t\t/sys/bus/iio/devices/iio:deviceX/tia_capacitanceY\n" "> +Date:\t\tDecember 2015\n" "> +KernelVersion:\n" - "> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + "> +Contact:\tAndrew F. Davis <afd@ti.com>\n" "> +Description:\n" "> +\t\tGet and set the resistance and the capacitance settings for the\n" "> +\t\tTransimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for\n" @@ -77,7 +76,7 @@ "> +What:\t\t/sys/bus/iio/devices/iio:deviceX/tia_separate_en\n" "> +Date:\t\tDecember 2015\n" "> +KernelVersion:\n" - "> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + "> +Contact:\tAndrew F. Davis <afd@ti.com>\n" "> +Description:\n" "> +\t\tEnable or disable separate settings for the TransImpedance\n" "> +\t\tAmplifier above, when disabled both values are set by the\n" @@ -87,7 +86,7 @@ "> +\t\t/sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw\n" "> +Date:\t\tDecember 2015\n" "> +KernelVersion:\n" - "> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + "> +Contact:\tAndrew F. Davis <afd@ti.com>\n" "> +Description:\n" "> +\t\tGet measured values from the ADC for these stages. Y is the\n" "> +\t\tspecific LED number. The values are expressed in 24-bit twos\n" @@ -96,7 +95,7 @@ "> +What:\t\t/sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw\n" "> +Date:\t\tDecember 2015\n" "> +KernelVersion:\n" - "> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + "> +Contact:\tAndrew F. Davis <afd@ti.com>\n" "> +Description:\n" "> +\t\tGet differential values from the ADC for these stages. Y is the\n" "> +\t\tspecific LED number. The values are expressed in 24-bit twos\n" @@ -105,7 +104,7 @@ "> +What:\t\t/sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw\n" "> +Date:\t\tDecember 2015\n" "> +KernelVersion:\n" - "> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + "> +Contact:\tAndrew F. Davis <afd@ti.com>\n" "> +Description:\n" "> +\t\tGet and set the LED current for the specified LED. Y is the\n" "> +\t\tspecific LED number.\n" @@ -158,7 +157,7 @@ "> + * AFE4403 Heart Rate Monitors and Low-Cost Pulse Oximeters\n" "> + *\n" "> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/\n" - "> + *\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + "> + *\tAndrew F. Davis <afd@ti.com>\n" "> + *\n" "> + * This program is free software; you can redistribute it and/or modify\n" "> + * it under the terms of the GNU General Public License version 2 as\n" @@ -869,9 +868,9 @@ "> +};\n" "> +module_spi_driver(afe4403_spi_driver);\n" "> +\n" - "> +MODULE_AUTHOR(\"Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\");\n" + "> +MODULE_AUTHOR(\"Andrew F. Davis <afd@ti.com>\");\n" "> +MODULE_DESCRIPTION(\"TI AFE4403 Heart Rate and Pulse Oximeter\");\n" "> +MODULE_LICENSE(\"GPL\");\n" > -de45f67a53a394d41210ab58919aa618b099d661313fd12bb13bab9506a4fd6d +e76527a4b7e46b72d8d4d9bd4e4a37cd1b932b481a9e93a289f26dac03dcab46
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.