All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sagi Grimberg <sagig-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
To: Eran Ben Elisha <eranbe-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
	Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Or Gerlitz <ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
	Christoph Lameter <cl-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org>
Subject: Re: [PATCH v2 for-next 5/7] IB/mlx4: Add IB counters table
Date: Thu, 24 Dec 2015 12:12:59 +0200	[thread overview]
Message-ID: <567BC52B.4030801@dev.mellanox.co.il> (raw)
In-Reply-To: <1444909482-17113-6-git-send-email-eranbe-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>

This patch seems to generate a list corruption [1] when I test
with Doug's for-4.5 tree.

Eran, care to take a look at this?

[1]:
mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014) 

mlx4_core: Initializing 0000:04:00.0 

mlx4_core 0000:04:00.0: PCIe link speed is 8.0GT/s, device supports 
8.0GT/s
mlx4_core 0000:04:00.0: PCIe link width is x8, device supports x8 

<mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver 
v2.2-1 (Feb 2014)
<mlx4_ib> mlx4_ib_add: counter index 0 for port 1 allocated 0 

<mlx4_ib> mlx4_ib_add: counter index 1 for port 2 allocated 0 

BUG: unable to handle kernel NULL pointer dereference at 
(null)
IP: [<ffffffff81274e36>] __list_add+0x26/0xd0 

PGD 46da14067 PUD 46daa0067 PMD 0 

Oops: 0000 [#1] SMP 

Modules linked in: mlx4_ib(+) ib_sa ib_mad mlx4_core mlx5_ib mlx5_core 
ib_core ib_addr netconsole configfs nfsv3 nfs fscache cfg80211 rfkill 
x86_pkg_temp_thermal coretemp kvm_intel kvm irqbypass crc32c_intel 
aesni_intel aes_x86_64 glue_helper lrw dm_mod gf128mul ablk_helper 
cryptd iTCO_wdt iTCO_vendor_support sb_edac shpchp ipmi_si ioatdma 
lpc_ich mfd_core edac_core pcspkr wmi ipmi_msghandler i2c_i801 
acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 
mbcache jbd2 sd_mod isci libsas igb serio_raw ahci ptp pps_core libahci 
i2c_algo_bit scsi_transport_sas i2c_core dca ipv6 autofs4 [last 
unloaded: mlx5_core] 

CPU: 0 PID: 1737 Comm: modprobe Not tainted 4.4.0-rc6+ #107 
 

Hardware name: Supermicro SYS-1027R-WRF/X9DRW, BIOS 3.0a 08/08/2013 
 

task: ffff8804673da800 ti: ffff880466694000 task.ti: ffff880466694000 
 

RIP: 0010:[<ffffffff81274e36>]  [<ffffffff81274e36>] 
__list_add+0x26/0xd0 

RSP: 0018:ffff880466697898  EFLAGS: 00010246 
 

RAX: 00000000ffffffff RBX: ffff8804666978c8 RCX: ffff8804673da800 
 

RDX: ffff88086b8539b8 RSI: 0000000000000000 RDI: ffff8804666978c8 
 

RBP: ffff8804666978b8 R08: 0000000000000000 R09: 0000000000000001 
 

R10: 0000000000000000 R11: 000000000000fffe R12: ffff88086b8539b8 
 

R13: 0000000000000000 R14: ffff88086b8539b8 R15: ffff880466697908
FS:  00007f37a02cf700(0000) GS:ffff88047fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000046b6ee000 CR4: 00000000000406f0
Stack:
  ffff8804673da800 ffff88086b8539b0 ffff8804673da800 ffff88086b8539b4
  ffff880466697958 ffffffff8154f7be ffff880466697904 0000000000000292
  ffff880466697938 ffffffff81259bc1 0000000000007f49 80000000024000c0
Call Trace:
  [<ffffffff8154f7be>] __mutex_lock_slowpath+0x6e/0x110
  [<ffffffff81259bc1>] ? ida_simple_get+0x91/0x100
  [<ffffffff811d354e>] ? kernfs_next_descendant_post+0x1e/0x90
  [<ffffffff811d3646>] ? kernfs_activate+0x86/0xf0
  [<ffffffff8154f87e>] mutex_lock+0x1e/0x40
  [<ffffffffa00fb083>] iboe_process_mad+0x73/0x180 [mlx4_ib]
  [<ffffffffa00fba36>] mlx4_ib_process_mad+0xd6/0x110 [mlx4_ib]
  [<ffffffffa06b4703>] get_perf_mad+0x103/0x140 [ib_core]
  [<ffffffffa06b4764>] get_counter_table+0x24/0x40 [ib_core]
  [<ffffffff8115846e>] ? __kmalloc+0xde/0xe0
  [<ffffffffa06b4895>] add_port+0x115/0x3f0 [ib_core]
  [<ffffffffa06b4c5e>] ib_device_register_sysfs+0xee/0x160 [ib_core]
  [<ffffffffa06b5e05>] ib_register_device+0x1d5/0x300 [ib_core]
  [<ffffffffa010282b>] mlx4_ib_add+0x78b/0xd00 [mlx4_ib]
  [<ffffffffa08027ce>] mlx4_add_device+0x3e/0xb0 [mlx4_core]
  [<ffffffffa0802957>] mlx4_register_interface+0x87/0xe0 [mlx4_core]
  [<ffffffffa0096055>] mlx4_ib_init+0x55/0x72 [mlx4_ib]
  [<ffffffffa0096000>] ? 0xffffffffa0096000
  [<ffffffff81000368>] do_one_initcall+0xa8/0x1c0
  [<ffffffff810ca5bf>] do_init_module+0x5f/0x210
  [<ffffffff810cc267>] load_module+0x5d7/0x700
  [<ffffffff810c97a0>] ? mod_sysfs_teardown+0x140/0x140
  [<ffffffff810c91f0>] ? module_sect_show+0x20/0x20
  [<ffffffff810cc44b>] SyS_finit_module+0xbb/0xf0
  [<ffffffff81551757>] entry_SYSCALL_64_fastpath+0x12/0x6a
Code: 90 90 90 90 90 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 48 
89 fb 4c 89 6d f8 4c 8b 42 08 49 89 f5 49 89 d4 49 39 f0 75 31 <4d> 8b 
45 00 4d 39 c4 75 6f 4c 39 e3 74 45 4c 39 eb 74 40 49 89
RIP  [<ffffffff81274e36>] __list_add+0x26/0xd0
  RSP <ffff880466697898>
CR2: 0000000000000000
---[ end trace 5f4fe0ca857661e6 ]---
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-12-24 10:12 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-15 11:44 [PATCH v2 for-next 0/7] Add support for multicast loopback prevention to mlx4 Eran Ben Elisha
     [not found] ` <1444909482-17113-1-git-send-email-eranbe-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2015-10-15 11:44   ` [PATCH v2 for-next 1/7] IB/core: Extend ib_uverbs_create_qp Eran Ben Elisha
     [not found]     ` <1444909482-17113-2-git-send-email-eranbe-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2015-10-21  8:34       ` Haggai Eran
     [not found]         ` <56274E02.7010002-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2015-10-21 13:46           ` eran ben elisha
     [not found]             ` <CAKHjkj=k6QSKj0gMe0z5=Kjbe2e7cVCbPhkq9Z457gpvnRyitg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-21 14:42               ` Haggai Eran
2015-10-21  9:53       ` Sagi Grimberg
     [not found]         ` <56276095.6020803-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-10-21 10:04           ` Or Gerlitz
     [not found]             ` <56276336.7000704-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2015-10-21 14:09               ` Sagi Grimberg
     [not found]                 ` <56279CA4.8040201-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-10-21 18:15                   ` Or Gerlitz
     [not found]                     ` <CAJ3xEMgWcpKbKL3jhiK2RP=H6_iY0eriirAXn1TJaSG7u8frAA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-21 18:21                       ` Christoph Lameter
     [not found]                         ` <alpine.DEB.2.20.1510211319520.10833-wcBtFHqTun5QOdAKl3ChDw@public.gmane.org>
2015-10-21 18:52                           ` Or Gerlitz
2015-10-21 10:26           ` Haggai Eran
2015-10-15 11:44   ` [PATCH v2 for-next 2/7] IB/core: Allow setting create flags in QP init attribute Eran Ben Elisha
     [not found]     ` <1444909482-17113-3-git-send-email-eranbe-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2015-10-21  8:46       ` Haggai Eran
2015-10-15 11:44   ` [PATCH v2 for-next 3/7] net/mlx4_core: Add support for filtering multicast loopback Eran Ben Elisha
2015-10-15 11:44   ` [PATCH v2 for-next 4/7] net/mlx4_en: Implement mcast loopback prevention for ETH qps Eran Ben Elisha
2015-10-15 11:44   ` [PATCH v2 for-next 5/7] IB/mlx4: Add IB counters table Eran Ben Elisha
     [not found]     ` <1444909482-17113-6-git-send-email-eranbe-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2015-12-24 10:12       ` Sagi Grimberg [this message]
     [not found]         ` <567BC52B.4030801-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-12-24 10:30           ` Sagi Grimberg
2015-12-24 10:34           ` Or Gerlitz
     [not found]             ` <567BCA3F.7050502-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2015-12-24 10:42               ` Sagi Grimberg
     [not found]                 ` <567BCBF8.30006-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-12-24 12:38                   ` Or Gerlitz
     [not found]                     ` <567BE756.9050005-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2015-12-24 14:07                       ` Matan Barak
     [not found]                         ` <CAAKD3BBsv8Qe=RZvCTOa=0kuSAqYetx4NOok_Tcp5xtUz+Ggtw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-12-24 16:09                           ` Matan Barak
     [not found]                             ` <CAAKD3BB5-hUC=0bDqxXxuag9TPqQEeMD74paHrAMOc-MsQwEow-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-12-25 14:50                               ` Hal Rosenstock
     [not found]                                 ` <567D57A5.2050908-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-12-25 15:56                                   ` Hal Rosenstock
     [not found]                                     ` <567D674B.9050807-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-12-27 11:16                                       ` Matan Barak
2015-10-15 11:44   ` [PATCH v2 for-next 6/7] IB/mlx4: Add counter based implementation for QP multicast loopback block Eran Ben Elisha
2015-10-15 11:44   ` [PATCH v2 for-next 7/7] IB/mlx4: Add support for blocking multicast loopback QP creation user flag Eran Ben Elisha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=567BC52B.4030801@dev.mellanox.co.il \
    --to=sagig-ldsdmyg8hgv8yrgs2mwiifqbs+8scbdb@public.gmane.org \
    --cc=cl-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org \
    --cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=eranbe-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.