[U-Boot] [RFC PATCH 1/2] common: Add new clk command

[Michal Simek <michal.simek@xilinx.com>]

Hi Simon,

On 22.12.2015 05:21, Simon Glass wrote:
> Hi Michal,
> 
> On 22 January 2014 at 04:02, Michal Simek <michal.simek@xilinx.com> wrote:
>> Command provides just dump subcommand for showing clock
>> frequencies in a soc.
>>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>>
>>  README                   |  1 +
>>  common/Makefile          |  1 +
>>  common/cmd_clk.c         | 51 ++++++++++++++++++++++++++++++++++++++++++++++++
>>  include/clk.h            |  6 ++++++
>>  include/config_cmd_all.h |  1 +
>>  5 files changed, 60 insertions(+)
>>  create mode 100644 common/cmd_clk.c
>>  create mode 100644 include/clk.h
>>
>> diff --git a/README b/README
>> index aea82be..0087649 100644
>> --- a/README
>> +++ b/README
>> @@ -887,6 +887,7 @@ The following options need to be configured:
>>                 CONFIG_CMD_BSP          * Board specific commands
>>                 CONFIG_CMD_BOOTD          bootd
>>                 CONFIG_CMD_CACHE        * icache, dcache
>> +               CONFIG_CMD_CLK          * clock command support
>>                 CONFIG_CMD_CONSOLE        coninfo
>>                 CONFIG_CMD_CRC32        * crc32
>>                 CONFIG_CMD_DATE         * support for RTC, date/time...
>> diff --git a/common/Makefile b/common/Makefile
>> index d12cba5..a000e7d 100644
>> --- a/common/Makefile
>> +++ b/common/Makefile
>> @@ -59,6 +59,7 @@ obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
>>  obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o
>>  obj-$(CONFIG_CMD_CACHE) += cmd_cache.o
>>  obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o
>> +obj-$(CONFIG_CMD_CLK) += cmd_clk.o
>>  obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o
>>  obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
>>  obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o
>> diff --git a/common/cmd_clk.c b/common/cmd_clk.c
>> new file mode 100644
>> index 0000000..6d3d46a
>> --- /dev/null
>> +++ b/common/cmd_clk.c
>> @@ -0,0 +1,51 @@
>> +/*
>> + * Copyright (C) 2013 Xilinx, Inc.
>> + *
>> + * SPDX-License-Identifier:    GPL-2.0+
>> + */
>> +#include <common.h>
>> +#include <command.h>
>> +#include <clk.h>
>> +
>> +int __weak soc_clk_dump(void)
>> +{
>> +       puts("Not implemented\n");
>> +       return 1;
>> +}
>> +
>> +static int do_clk_dump(cmd_tbl_t *cmdtp, int flag, int argc,
>> +                      char *const argv[])
>> +{
>> +       return soc_clk_dump();
> 
> This is not the way things should work in driver model. See how the
> gpio command works for an example. I suggest it iterates through the
> available clocks and then calls a driver function to obtain
> information about each clock, then prints it out. We should avoid weak
> functions as a method of connecting things together.

This is patch which was sent in 2014. What are you trying to suggest?

Cheers,
Michal