From mboxrd@z Thu Jan 1 00:00:00 1970 From: martind@noxam.com Date: Thu, 11 Jun 2009 23:28:27 +0000 Subject: [lm-sensors] ASUS M3A78-CM Message-Id: <56834.1244762907@noxam.com> MIME-Version: 1 Content-Type: multipart/mixed; boundary="===============4830265329427472375==" List-Id: To: lm-sensors@vger.kernel.org --===============4830265329427472375== Content-type: multipart/alternative; boundary="Boundary_(ID_Z/ScvS22X7cFWOzCgwWLSQ)" --Boundary_(ID_Z/ScvS22X7cFWOzCgwWLSQ) Content-type: text/plain; charset=utf-8 Content-transfer-encoding: 7BIT Hi all! After couple hours... figured out the config for an ASUS M3A78-CM motherboard Here you go! chip "it87-*" "it8712-*" # The values below have been tested on Asus M3A78-CM motherboards. label in0 "VCore 1" ignore in1 label in2 "+3.3V" ignore in3 label in4 "+12V" label in5 "+5V" ignore in6 ignore in7 label in8 "VBat" compute in4 ((28/10) +1)*@ , @/((28/10) +1) compute in5 @*(1+(22/10)), @/(1+(22/10)) set in0_min 1.30 * 0.95 set in0_max 1.30 * 1.05 set in2_min 3.3 * 0.95 set in2_max 3.3 * 1.05 set in4_min 12 * 0.95 set in4_max 12 * 1.05 set in5_min 5 * 0.95 set in5_max 5 * 1.05 set temp1_type 2 set temp2_type 2 set temp3_type 3 ignore temp3 label temp1 "CPU Temp" label temp2 "M/B Temp" _____________________________________ remove everything else! here is the output from sensors: frodo:/sys/class/hwmon/hwmon1/device # sensors atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +1.30 V (min = +0.85 V, max = +1.60 V) +3.3 Voltage: +3.28 V (min = +2.97 V, max = +3.63 V) +5 Voltage: +4.97 V (min = +4.50 V, max = +5.50 V) +12 Voltage: +12.22 V (min = +10.20 V, max = +13.80 V) CPU FAN Speed: 2295 RPM (min = 600 RPM) CHASSIS FAN Speed: 0 RPM (min = 600 RPM) POWER FAN Speed: 1313 RPM (min = 600 RPM) CPU Temperature: +48.0°C (high = +60.0°C, crit = +95.0°C) MB Temperature: +35.0°C (high = +45.0°C, crit = +95.0°C) it8712-isa-0290 Adapter: ISA adapter VCore 1: +1.30 V (min = +1.23 V, max = +1.36 V) +3.3V: +3.28 V (min = +3.14 V, max = +3.47 V) +12V: +12.22 V (min = +11.37 V, max = +12.59 V) +5V: +4.97 V (min = +4.76 V, max = +5.27 V) VBat: +3.20 V fan1: 2295 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 1313 RPM (min = 0 RPM) CPU Temp: +48.0°C (low = -1.0°C, high = -5.0°C) sensor = thermistor M/B Temp: +35.0°C (low = -1.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.550 V frodo:/sys/class/hwmon/hwmon1/device # Best Regards Martin Desormeaux a.k.a Neo2048 --Boundary_(ID_Z/ScvS22X7cFWOzCgwWLSQ) Content-type: text/html; charset=utf-8 Content-transfer-encoding: quoted-printable

 

Hi all!

After couple hours... figured out the= config for an ASUS M3A78-CM
motherboard
Here you go!
chi= p "it87-*" "it8712-*"

# The values below h= ave been tested on Asus M3A78-CM motherboards.

label in0 &= quot;VCore 1"
ignore in1
label in2 "+3.3V&quo= t;
ignore in3
label in4 "+12V"
labe= l in5 "+5V"
ignore in6
ignore in7
l= abel in8 "VBat"

compute in4 ((28/10) +1)*@ , @/= ((28/10) +1)
compute in5 @*(1+(22/10)), @/(1+(22/10))

set in0_min 1.30 * 0.95
set in0_max 1.30 * 1.05
= set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set i= n4_min 12 * 0.95
set in4_max 12 * 1.05
set in5_min = 5 * 0.95
set in5_max 5 * 1.05

set temp1_ty= pe 2
set temp2_type 2
set temp3_type 3
ignore= temp3

label temp1 "CPU Temp"
la= bel temp2 "M/B Temp"

_________________________= ____________

remove everything else!

here is the = output from sensors:
frodo:/sys/class/hwmon/hwmon1/device # sensors atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: = +1.30 V (min =3D +0.85 V, max =3D +1.60 V)
+3.3 Voltage: +3.2= 8 V (min =3D +2.97 V, max =3D +3.63 V)
+5 Voltage: +4.97 V = (min =3D +4.50 V, max =3D +5.50 V)
+12 Voltage: +12.22 V (mi= n =3D +10.20 V, max =3D +13.80 V)
CPU FAN Speed: 2295 RPM (min = =3D 600 RPM)
CHASSIS FAN Speed: 0 RPM (min =3D 600 RPM)
PO= WER FAN Speed: 1313 RPM (min =3D 600 RPM)
CPU Temperature: +48.0= &deg;C (high =3D +60.0&deg;C, crit =3D
+95.0&deg;C)
MB Temperature: +35.0&deg;C (high =3D +45.0&deg;C, crit =3D +95.0&deg;C)

it8712-isa-0290
Adapter: ISA adapt= er
VCore 1: +1.30 V (min =3D +1.23 V, max =3D +1.36 V)
+= 3.3V: +3.28 V (min =3D +3.14 V, max =3D +3.47 V)
+12V: = +12.22 V (min =3D +11.37 V, max =3D +12.59 V)
+5V: +4.97 V = (min =3D +4.76 V, max =3D +5.27 V)
VBat: +3.20 V
fan1= : 2295 RPM (min =3D 0 RPM)
fan2: 0 RPM (min =3D = 0 RPM)
fan3: 1313 RPM (min =3D 0 RPM)
CPU Temp: = +48.0&deg;C (low =3D -1.0&deg;C, high =3D -5.0&deg;C)
sensor =3D thermistor
M/B Temp: +35.0&deg;C (low =3D -1.0= &deg;C, high =3D +127.0&deg;C)
sensor =3D thermistor
c= pu0_vid: +1.550 V

frodo:/sys/class/hwmon/hwmon1/device #
Best Regards
Martin Desormeaux

a.k.a Neo2048

= --Boundary_(ID_Z/ScvS22X7cFWOzCgwWLSQ)-- --===============4830265329427472375== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors --===============4830265329427472375==--