diff for duplicates of <568415A6.1010501@ti.com> diff --git a/a/1.txt b/N1/1.txt index 51b72c5..486013b 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -7,7 +7,7 @@ On 12/22/2015 11:59 AM, Jonathan Cameron wrote: >> Data sheet located here: >> http://www.ti.com/product/AFE4403/datasheet >> ->> Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +>> Signed-off-by: Andrew F. Davis <afd@ti.com> > I assume the plan is to break some of this out into a common shared > 'helper' module for the two drivers? You will probably want > to do that before we merge either of them. Again, doesn't look like @@ -51,7 +51,7 @@ Will do. >> + /sys/bus/iio/devices/iio:deviceX/tia_capacitanceY >> +Date: December 2015 >> +KernelVersion: ->> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +>> +Contact: Andrew F. Davis <afd@ti.com> >> +Description: >> + Get and set the resistance and the capacitance settings for the >> + Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for @@ -71,7 +71,7 @@ Will add. >> +What: /sys/bus/iio/devices/iio:deviceX/tia_separate_en >> +Date: December 2015 >> +KernelVersion: ->> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +>> +Contact: Andrew F. Davis <afd@ti.com> >> +Description: >> + Enable or disable separate settings for the TransImpedance >> + Amplifier above, when disabled both values are set by the @@ -81,7 +81,7 @@ Will add. >> + /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw >> +Date: December 2015 >> +KernelVersion: ->> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +>> +Contact: Andrew F. Davis <afd@ti.com> >> +Description: >> + Get measured values from the ADC for these stages. Y is the >> + specific LED number. The values are expressed in 24-bit twos @@ -90,7 +90,7 @@ Will add. >> +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw >> +Date: December 2015 >> +KernelVersion: ->> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +>> +Contact: Andrew F. Davis <afd@ti.com> >> +Description: >> + Get differential values from the ADC for these stages. Y is the >> + specific LED number. The values are expressed in 24-bit twos @@ -99,7 +99,7 @@ Will add. >> +What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw >> +Date: December 2015 >> +KernelVersion: ->> +Contact: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org> +>> +Contact: Andrew F. Davis <afd@ti.com> >> +Description: >> + Get and set the LED current for the specified LED. Y is the >> + specific LED number. diff --git a/a/content_digest b/N1/content_digest index a7a2141..dab1afd 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,23 +1,22 @@ "ref\01450132561-5245-1-git-send-email-afd@ti.com\0" "ref\01450132561-5245-6-git-send-email-afd@ti.com\0" "ref\056798F9C.8020304@kernel.org\0" - "ref\056798F9C.8020304-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org\0" - "From\0Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\0" + "From\0Andrew F. Davis <afd@ti.com>\0" "Subject\0Re: [PATCH v3 5/5] iio: health: Add driver for the TI AFE4403 heart monitor\0" "Date\0Wed, 30 Dec 2015 11:34:30 -0600\0" - "To\0Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>" - Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> - Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> - Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> - Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> - Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> - Hartmut Knaack <knaack.h-Mmb7MZpHnFY@public.gmane.org> - Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org> - " Peter Meerwald <pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org>\0" - "Cc\0devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" - linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - " linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\0" + "To\0Jonathan Cameron <jic23@kernel.org>" + Rob Herring <robh+dt@kernel.org> + Pawel Moll <pawel.moll@arm.com> + Mark Rutland <mark.rutland@arm.com> + Ian Campbell <ijc+devicetree@hellion.org.uk> + Kumar Gala <galak@codeaurora.org> + Hartmut Knaack <knaack.h@gmx.de> + Lars-Peter Clausen <lars@metafoo.de> + " Peter Meerwald <pmeerw@pmeerw.net>\0" + "Cc\0<devicetree@vger.kernel.org>" + <linux-iio@vger.kernel.org> + <linux-api@vger.kernel.org> + " <linux-kernel@vger.kernel.org>\0" "\00:1\0" "b\0" "On 12/22/2015 11:59 AM, Jonathan Cameron wrote:\n" @@ -29,7 +28,7 @@ ">> Data sheet located here:\n" ">> http://www.ti.com/product/AFE4403/datasheet\n" ">>\n" - ">> Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + ">> Signed-off-by: Andrew F. Davis <afd@ti.com>\n" "> I assume the plan is to break some of this out into a common shared\n" "> 'helper' module for the two drivers? You will probably want\n" "> to do that before we merge either of them. Again, doesn't look like\n" @@ -73,7 +72,7 @@ ">> +\t\t/sys/bus/iio/devices/iio:deviceX/tia_capacitanceY\n" ">> +Date:\t\tDecember 2015\n" ">> +KernelVersion:\n" - ">> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + ">> +Contact:\tAndrew F. Davis <afd@ti.com>\n" ">> +Description:\n" ">> +\t\tGet and set the resistance and the capacitance settings for the\n" ">> +\t\tTransimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for\n" @@ -93,7 +92,7 @@ ">> +What:\t\t/sys/bus/iio/devices/iio:deviceX/tia_separate_en\n" ">> +Date:\t\tDecember 2015\n" ">> +KernelVersion:\n" - ">> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + ">> +Contact:\tAndrew F. Davis <afd@ti.com>\n" ">> +Description:\n" ">> +\t\tEnable or disable separate settings for the TransImpedance\n" ">> +\t\tAmplifier above, when disabled both values are set by the\n" @@ -103,7 +102,7 @@ ">> +\t\t/sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw\n" ">> +Date:\t\tDecember 2015\n" ">> +KernelVersion:\n" - ">> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + ">> +Contact:\tAndrew F. Davis <afd@ti.com>\n" ">> +Description:\n" ">> +\t\tGet measured values from the ADC for these stages. Y is the\n" ">> +\t\tspecific LED number. The values are expressed in 24-bit twos\n" @@ -112,7 +111,7 @@ ">> +What:\t\t/sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw\n" ">> +Date:\t\tDecember 2015\n" ">> +KernelVersion:\n" - ">> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + ">> +Contact:\tAndrew F. Davis <afd@ti.com>\n" ">> +Description:\n" ">> +\t\tGet differential values from the ADC for these stages. Y is the\n" ">> +\t\tspecific LED number. The values are expressed in 24-bit twos\n" @@ -121,7 +120,7 @@ ">> +What:\t\t/sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw\n" ">> +Date:\t\tDecember 2015\n" ">> +KernelVersion:\n" - ">> +Contact:\tAndrew F. Davis <afd-l0cyMroinI0@public.gmane.org>\n" + ">> +Contact:\tAndrew F. Davis <afd@ti.com>\n" ">> +Description:\n" ">> +\t\tGet and set the LED current for the specified LED. Y is the\n" ">> +\t\tspecific LED number.\n" @@ -369,4 +368,4 @@ "Thanks,\n" Andrew -7c7b09657d86341ac2200f06dd3204ef9732a1295d97f7bfd426d956243a1fb5 +902a07581139dbfe14103cabcaf544761bf8ada43a63e2a2353e46cac62d71ff
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.