[U-Boot] [PATCH v2 1/3] phy: atheros: Use ar8035_config for AR8031

[Stefano Babic <sbabic@denx.de>]

Hi Fabio,

On 06/01/2016 10:47, Fabio Estevam wrote:
> On Wed, Jan 6, 2016 at 3:17 AM, Qiang Zhao <qiang.zhao@nxp.com> wrote:
>> On Tue, Jan 5, 2016 at 1:02 PM, Fabio Estevam <festevam@gmail.com> wrote:
>>
>>> -----Original Message-----
>>> From: Fabio Estevam [mailto:festevam at gmail.com]
>>> Sent: Wednesday, January 06, 2016 3:03 AM
>>> To: sbabic at denx.de
>>> Cc: joe.hershberger at ni.com; B45475 at freescale.com; yorksun at freescale.com;
>>> troy.kisky at boundarydevices.com; u-boot at lists.denx.de; Fabio Estevam
>>> <fabio.estevam@nxp.com>
>>> Subject: [PATCH v2 1/3] phy: atheros: Use ar8035_config for AR8031
>>>
>>> From: Fabio Estevam <fabio.estevam@nxp.com>
>>>
>>> Commit 08ad9b068afb88 (" ar8031: modify the config func of ar8031 to
>>> ar8021_config") selected 'ar8021_config' as the configuration function for
>>> AR8031.
>>>
>>> The correct would be to use 'ar8035_config' instead as AR8031/AR8035 have
>>> the same programming model and even share the same phy driver in the linux
>>> kernel: drivers/net/phy/at803x.c.
>>>
>>> Tested on a mx6qsabresd and wandboard, which now can work without any
>>> PHY setup code in the board files.
>>>
>>> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
>>> ---
>>> This is 2016.04 material.
>>>
>>> Zhao Qiang, could you please test this on your platform?
>>
>> Yes, have tested, it can work on my platform.
> 
> Excellent, thanks for testing, Zhao.
> 
> Stefano,
> 
> With Zhao's test I think it is safe to add this for 2016.01. What do you think?
> 

Agree, I pick it up.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================