From: Heiner Kallweit <hkallweit1@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>,
BlueZ development <linux-bluetooth@vger.kernel.org>
Subject: [PATCH v4] bluetooth: core: add LED trigger for indicating HCI is powered up
Date: Fri, 8 Jan 2016 19:28:58 +0100 [thread overview]
Message-ID: <568FFFEA.9060303@gmail.com> (raw)
Add support for LED triggers to the bluetooth core and add kernel config
symbol BT_LEDS for it.
For now one trigger for indicating "HCI is powered up" is supported.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- completely rewrote the code to be as generic as possible and minimize
the changes to struct hci_dev
- make the details of the LED triggers opaque to struct hci_dev
- avoid using ifdef CONFIG_BT_LEDS in hci_core.h
- start with the radio trigger only
- factor out the generic basic led trigger code to facilitate adding
further basic LED triggers
- fix indentation in Kconfig
- rename led.[ch] to leds.[ch]
v3:
- use term power instead of radio
- rename hci_led_ to hci_leds_
- remove the counter
- use IS_ENABLED for checking the config option
v4:
- rework commit message
- shorten static function names
- remove empty line at end of file
---
include/net/bluetooth/hci_core.h | 3 ++
net/bluetooth/Kconfig | 9 +++++
net/bluetooth/Makefile | 1 +
net/bluetooth/hci_core.c | 8 ++++
net/bluetooth/leds.c | 80 ++++++++++++++++++++++++++++++++++++++++
net/bluetooth/leds.h | 18 +++++++++
6 files changed, 119 insertions(+)
create mode 100644 net/bluetooth/leds.c
create mode 100644 net/bluetooth/leds.h
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index c95e032..0f084b4 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -25,6 +25,7 @@
#ifndef __HCI_CORE_H
#define __HCI_CORE_H
+#include <linux/leds.h>
#include <net/bluetooth/hci.h>
#include <net/bluetooth/hci_sock.h>
@@ -395,6 +396,8 @@ struct hci_dev {
struct delayed_work rpa_expired;
bdaddr_t rpa;
+ struct led_trigger *power_led;
+
int (*open)(struct hci_dev *hdev);
int (*close)(struct hci_dev *hdev);
int (*flush)(struct hci_dev *hdev);
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index 95d1a66..06c31b9 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -69,6 +69,15 @@ config BT_6LOWPAN
help
IPv6 compression over Bluetooth Low Energy.
+config BT_LEDS
+ bool "Enable LED triggers"
+ depends on BT
+ depends on LEDS_CLASS
+ select LEDS_TRIGGERS
+ help
+ This option selects a few LED triggers for different
+ Bluetooth events.
+
config BT_SELFTEST
bool "Bluetooth self testing support"
depends on BT && DEBUG_KERNEL
diff --git a/net/bluetooth/Makefile b/net/bluetooth/Makefile
index 2b15ae8..b3ff12e 100644
--- a/net/bluetooth/Makefile
+++ b/net/bluetooth/Makefile
@@ -17,6 +17,7 @@ bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \
bluetooth-$(CONFIG_BT_BREDR) += sco.o
bluetooth-$(CONFIG_BT_HS) += a2mp.o amp.o
+bluetooth-$(CONFIG_BT_LEDS) += leds.o
bluetooth-$(CONFIG_BT_DEBUGFS) += hci_debugfs.o
bluetooth-$(CONFIG_BT_SELFTEST) += selftest.o
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 47bcef7..06f603a 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -40,6 +40,7 @@
#include "hci_request.h"
#include "hci_debugfs.h"
#include "smp.h"
+#include "leds.h"
static void hci_rx_work(struct work_struct *work);
static void hci_cmd_work(struct work_struct *work);
@@ -1395,6 +1396,7 @@ static int hci_dev_do_open(struct hci_dev *hdev)
hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);
set_bit(HCI_UP, &hdev->flags);
hci_sock_dev_event(hdev, HCI_DEV_UP);
+ hci_leds_update_powered(hdev, true);
if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
!hci_dev_test_flag(hdev, HCI_CONFIG) &&
!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
@@ -1532,6 +1534,8 @@ int hci_dev_do_close(struct hci_dev *hdev)
return 0;
}
+ hci_leds_update_powered(hdev, false);
+
/* Flush RX and TX works */
flush_work(&hdev->tx_work);
flush_work(&hdev->rx_work);
@@ -3067,6 +3071,8 @@ int hci_register_dev(struct hci_dev *hdev)
if (error < 0)
goto err_wqueue;
+ hci_leds_init(hdev);
+
hdev->rfkill = rfkill_alloc(hdev->name, &hdev->dev,
RFKILL_TYPE_BLUETOOTH, &hci_rfkill_ops,
hdev);
@@ -3128,6 +3134,8 @@ void hci_unregister_dev(struct hci_dev *hdev)
id = hdev->id;
+ hci_leds_exit(hdev);
+
write_lock(&hci_dev_list_lock);
list_del(&hdev->list);
write_unlock(&hci_dev_list_lock);
diff --git a/net/bluetooth/leds.c b/net/bluetooth/leds.c
new file mode 100644
index 0000000..ded7c88
--- /dev/null
+++ b/net/bluetooth/leds.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2015, Heiner Kallweit <hkallweit1@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "leds.h"
+
+struct hci_basic_led_trigger {
+ struct led_trigger led_trigger;
+ struct hci_dev *hdev;
+};
+
+#define to_hci_basic_led_trigger(arg) container_of(arg, \
+ struct hci_basic_led_trigger, led_trigger)
+
+void hci_leds_update_powered(struct hci_dev *hdev, bool enabled)
+{
+ if (hdev->power_led)
+ led_trigger_event(hdev->power_led,
+ enabled ? LED_FULL : LED_OFF);
+}
+
+static void power_activate(struct led_classdev *led_cdev)
+{
+ struct hci_basic_led_trigger *htrig;
+ bool powered;
+
+ htrig = to_hci_basic_led_trigger(led_cdev->trigger);
+ powered = test_bit(HCI_UP, &htrig->hdev->flags);
+
+ led_trigger_event(led_cdev->trigger, powered ? LED_FULL : LED_OFF);
+}
+
+static struct led_trigger *led_allocate_basic(struct hci_dev *hdev,
+ void (*activate)(struct led_classdev *led_cdev),
+ const char *name)
+{
+ struct hci_basic_led_trigger *htrig;
+
+ htrig = devm_kzalloc(&hdev->dev, sizeof(*htrig), GFP_KERNEL);
+ if (!htrig)
+ return NULL;
+
+ htrig->hdev = hdev;
+ htrig->led_trigger.activate = activate;
+ htrig->led_trigger.name = devm_kasprintf(&hdev->dev, GFP_KERNEL,
+ "%s-%s", hdev->name,
+ name);
+ if (!htrig->led_trigger.name)
+ goto err_alloc;
+
+ if (led_trigger_register(&htrig->led_trigger))
+ goto err_register;
+
+ return &htrig->led_trigger;
+
+err_register:
+ devm_kfree(&hdev->dev, (void *)htrig->led_trigger.name);
+err_alloc:
+ devm_kfree(&hdev->dev, htrig);
+ return NULL;
+}
+
+void hci_leds_init(struct hci_dev *hdev)
+{
+ /* initialize power_led */
+ hdev->power_led = led_allocate_basic(hdev, power_activate, "power");
+}
+
+void hci_leds_exit(struct hci_dev *hdev)
+{
+ if (hdev->power_led)
+ led_trigger_unregister(hdev->power_led);
+}
diff --git a/net/bluetooth/leds.h b/net/bluetooth/leds.h
new file mode 100644
index 0000000..068261a
--- /dev/null
+++ b/net/bluetooth/leds.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2015, Heiner Kallweit <hkallweit1@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#if IS_ENABLED(CONFIG_BT_LEDS)
+void hci_leds_update_powered(struct hci_dev *hdev, bool enabled);
+void hci_leds_init(struct hci_dev *hdev);
+void hci_leds_exit(struct hci_dev *hdev);
+#else
+static inline void hci_leds_update_powered(struct hci_dev *hdev,
+ bool enabled) {}
+static inline void hci_leds_init(struct hci_dev *hdev) {}
+static inline void hci_leds_exit(struct hci_dev *hdev) {}
+#endif
--
2.6.4
next reply other threads:[~2016-01-08 18:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-08 18:28 Heiner Kallweit [this message]
2016-01-08 22:14 ` [PATCH v4] bluetooth: core: add LED trigger for indicating HCI is powered up Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=568FFFEA.9060303@gmail.com \
--to=hkallweit1@gmail.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.