From: Purna Chandra Mandal <purna.mandal@microchip.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 09/14] board: Add Microchip PIC32MZ[DA]-Starter-Kit board.
Date: Thu, 14 Jan 2016 12:10:15 +0530 [thread overview]
Message-ID: <569742CF.1020909@microchip.com> (raw)
In-Reply-To: <20160113145610.GI3359@bill-the-cat>
On 01/13/2016 08:26 PM, Tom Rini wrote:
> On Tue, Jan 12, 2016 at 03:48:24PM +0530, Purna Chandra Mandal wrote:
>
>> This adds support for Microchip PIC32MZ[DA] StarterKit board
>> based on a PIC32MZ[DA] family of microcontroller.
>>
>> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
> [snip]
>> diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
>> new file mode 100644
>> index 0000000..3483eb0
>> --- /dev/null
>> +++ b/configs/pic32mzdask_defconfig
>> @@ -0,0 +1,416 @@
>> +#
>> +# Automatically generated file; DO NOT EDIT.
>> +# U-Boot 2016.01-rc3 Configuration
> Please use 'make savedefconfig' to generate this file instead, it will
> be much smaller (and this is also what you do with the linux kernel).
ack. Will do.
>> +++ b/include/configs/pic32mzdask.h
> [snip]
>> +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
> I think you can use the default here.
ack. Will drop this to use fallback one.
next prev parent reply other threads:[~2016-01-14 6:40 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 10:18 [U-Boot] [PATCH v3 00/14] Initial Microchip PIC32MZ[DA] Support Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 01/14] MIPS: initialize board_init_f() argument to zero Purna Chandra Mandal
2016-01-12 12:29 ` Daniel Schwierzeck
2016-01-14 5:29 ` Purna Chandra Mandal
2016-01-21 14:06 ` Daniel Schwierzeck
2016-01-12 10:18 ` [U-Boot] [PATCH v3 02/14] MIPS: initial infrastructure for Microchip PIC32 architecture Purna Chandra Mandal
2016-01-12 12:55 ` Daniel Schwierzeck
2016-01-13 14:56 ` Tom Rini
2016-01-12 10:18 ` [U-Boot] [PATCH v3 03/14] drivers: clk: Add clock driver for Microchip PIC32 Microcontroller Purna Chandra Mandal
2016-01-13 13:38 ` Daniel Schwierzeck
2016-01-14 5:34 ` Purna Chandra Mandal
2016-01-13 14:55 ` Tom Rini
2016-01-14 6:04 ` Purna Chandra Mandal
2016-01-14 12:30 ` Tom Rini
2016-01-12 10:18 ` [U-Boot] [PATCH v3 04/14] drivers: pinctrl: Add pinctrl driver for Microchip PIC32 Purna Chandra Mandal
2016-01-13 13:42 ` Daniel Schwierzeck
2016-01-13 14:55 ` Tom Rini
2016-01-13 20:10 ` Simon Glass
2016-01-12 10:18 ` [U-Boot] [PATCH v3 05/14] drivers: gpio: add driver for Microchip PIC32 GPIO controller Purna Chandra Mandal
2016-01-13 13:46 ` Daniel Schwierzeck
2016-01-13 14:08 ` Daniel Schwierzeck
2016-01-14 5:41 ` Purna Chandra Mandal
2016-01-13 14:55 ` Tom Rini
2016-01-13 20:10 ` Simon Glass
2016-01-14 10:15 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 06/14] drivers: serial: add driver for Microchip PIC32 UART controller Purna Chandra Mandal
2016-01-13 13:49 ` Daniel Schwierzeck
2016-01-13 14:03 ` Daniel Schwierzeck
2016-01-14 5:42 ` Purna Chandra Mandal
2016-01-13 14:55 ` Tom Rini
2016-01-13 20:09 ` Simon Glass
2016-01-14 6:14 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 07/14] drivers: ddr: Add DDR2 SDRAM controller driver for Microchip PIC32 Purna Chandra Mandal
2016-01-13 13:53 ` Daniel Schwierzeck
2016-01-13 14:55 ` Tom Rini
2016-01-13 20:09 ` Simon Glass
2016-01-12 10:18 ` [U-Boot] [PATCH v3 08/14] MIPS: Add support for Microchip PIC32MZ[DA] SoC family Purna Chandra Mandal
2016-01-13 14:49 ` Daniel Schwierzeck
2016-01-14 5:54 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 09/14] board: Add Microchip PIC32MZ[DA]-Starter-Kit board Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-14 6:40 ` Purna Chandra Mandal [this message]
2016-01-13 15:03 ` Daniel Schwierzeck
2016-01-14 8:40 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 10/14] drivers: mmc: add driver for Microchip PIC32 SDHCI controller Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-13 15:15 ` Daniel Schwierzeck
2016-01-14 9:18 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 11/14] board: add SDHCI support for PIC32MZDASK board Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-14 8:31 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 12/14] drivers: net: phy: add SMSC LAN8740 Phy support Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-13 15:19 ` Daniel Schwierzeck
2016-01-12 10:18 ` [U-Boot] [PATCH v3 13/14] drivers: net: Add ethernet driver for Microchip PIC32 Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-14 10:29 ` Purna Chandra Mandal
2016-01-13 15:37 ` Daniel Schwierzeck
2016-01-14 10:05 ` Purna Chandra Mandal
2016-01-14 14:01 ` Daniel Schwierzeck
2016-01-12 10:18 ` [U-Boot] [PATCH v3 14/14] board: Enable ethernet, tftpboot support to pic32mzdask board Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569742CF.1020909@microchip.com \
--to=purna.mandal@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.