All of lore.kernel.org
 help / color / mirror / Atom feed
From: vagner <vagnerrener@gmail.com>
To: ath10k@lists.infradead.org
Subject: Qualcomm Atheros Device 0042 (rev 30) - Finally working :)
Date: Wed, 20 Jan 2016 21:52:35 +0200	[thread overview]
Message-ID: <569FE583.8010105@gmail.com> (raw)


     Hi,

> I bought a Lenovo laptop 4 weeks ago with an atheros on that and have 
> since tried to make the wireless card to work...
> Today I came across this drive...
> https://github.com/ajaybhatia/Qualcomm-Atheros-QCA9377-Wifi-Linux
> I installed linux-image-4.4  from debian experimental, downloaded your 
> drive and installed it with "./install.sh". It deteted my card and 
> made that work!
>
> uname -a
>
> 4.4.0-rc8-rt-amd64 #1 SMP PREEMPT RT Debian 4.4~rc8-1~exp1 
> (2016-01-04) x86_64 GNU/Linux
>
> The only thing that I am still facing is that, I get a boot message 
> error,  saying that it does not load the board bin.
>
> But it is working  for now...
>
> +++++++++++++++++++++++++++++
>
> lspci
>  Network controller: Qualcomm Atheros Device 0042 (rev 30)
>
> lshw -C network
>
>  *-network
>        description: Wireless interface
>        product: Qualcomm Atheros
>        vendor: Qualcomm Atheros
>        physical id: 0
>        bus info: pci@0000:02:00.0
>        logical name: wlp2s0
>        version: 30
>        serial: b8:86:87:53:d8:11
>        width: 64 bits
>        clock: 33MHz
>        capabilities: pm msi pciexpress bus_master cap_list ethernet 
> physical wireless
>        configuration: broadcast=yes driver=ath10k_pci 
> driverversion=4.4.0-rc8-rt-amd64 firmware=WLAN.TF.1.0-00267-1 
> ip=10.0.0.10 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
>        resources: irq:130 memory:a1000000-a11fffff
>

> boot error message:
>
>  dmesg |grep ath10

> [   11.143242] ath10k_pci 0000:02:00.0: pci irq msi-x interrupts 8 
> irq_mode 0 reset_mode 0
> [   11.398620] ath10k_pci 0000:02:00.0: firmware: failed to load 
> ath10k/cal-pci-0000:02:00.0.bin (-2)
> [   11.398671] ath10k_pci 0000:02:00.0: Direct firmware load for 
> ath10k/cal-pci-0000:02:00.0.bin failed with error -2
> [   11.416212] ath10k_pci 0000:02:00.0: firmware: direct-loading 
> firmware ath10k/QCA9377/hw1.0/firmware-5.bin
> [   11.416218] ath10k_pci 0000:02:00.0: qca9377 hw1.0 target 
> 0x05020000 chip_id 0x003820ff sub 17aa:4035
> [   11.416221] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 
> tracing 0 dfs 0 testmode 0
> [   11.416648] ath10k_pci 0000:02:00.0: firmware ver 
> WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
> [   11.478184] ath10k_pci 0000:02:00.0: firmware: failed to load 
> ath10k/QCA9377/hw1.0/board-2.bin (-2)
> [   11.478230] ath10k_pci 0000:02:00.0: Direct firmware load for 
> ath10k/QCA9377/hw1.0/board-2.bin failed with error -2
> [   11.610801] ath10k_pci 0000:02:00.0: firmware: direct-loading 
> firmware ath10k/QCA9377/hw1.0/board.bin
> [   11.610822] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A 
> crc32 544289f7
> [   13.397208] ath10k_pci 0000:02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 
> cal otp max-sta 32 raw 0 hwcrypto 1
> [   13.483133] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
> [  186.996289] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap 
> llc cpufreq_userspace cpufreq_powersave cpufreq_stats 
> cpufreq_conservative bnep binfmt_misc nfsd auth_rpcgss oid_registry 
> nfs_acl nfs lockd grace fscache sunrpc parport_pc ppdev lp parport 
> arc4 rtsx_usb_sdmmc rtsx_usb_ms mmc_core memstick rtsx_usb mfd_core 
> uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 
> videobuf2_core v4l2_common videodev media ath10k_pci(O) btusb btrtl 
> joydev snd_hda_codec_hdmi ath10k_core(O) snd_hda_codec_conexant 
> snd_hda_codec_generic intel_rapl iosf_mbi intel_powerclamp coretemp 
> ath(O) kvm_intel mac80211(O) kvm irqbypass crct10dif_pclmul 
> crc32_pclmul crc32c_intel snd_hda_intel snd_hda_codec snd_hda_core 
> snd_hwdep snd_pcm snd_timer snd soundcore sha256_ssse3 sha256_generic 
> hmac drbg ansi_cprng cfg80211(O)
> [  186.996362] CPU: 1 PID: 574 Comm: irq/133-ath10k_ Tainted: 
> G           O    4.4.0-rc8-rt-amd64 #1 Debian 4.4~rc8-1~exp1
> [  186.996405]  [<ffffffffa0849a12>] ? 
> ath10k_wmi_event_mgmt_rx+0x232/0x3e0 [ath10k_core]
> [  186.996411]  [<ffffffffa083d5b0>] ? 
> ath10k_htc_build_tx_ctrl_skb+0xb0/0xb0 [ath10k_core]
> [  186.996416]  [<ffffffffa083d80d>] ? 
> ath10k_htc_rx_completion_handler+0x25d/0x4f0 [ath10k_core]
> [  186.996422]  [<ffffffffa083d5b0>] ? 
> ath10k_htc_build_tx_ctrl_skb+0xb0/0xb0 [ath10k_core]
> [  186.996426]  [<ffffffffa0647eb6>] ? 
> ath10k_pci_process_rx_cb+0x186/0x200 [ath10k_pci]
> [  186.996433]  [<ffffffffa064a978>] ? 
> ath10k_ce_per_engine_service+0x78/0xd0 [ath10k_pci]
> [  347.908870] ath10k_pci 0000:02:00.0: no channel configured; 
> ignoring frame(s)!
>
    Vagner

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

                 reply	other threads:[~2016-01-20 19:53 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=569FE583.8010105@gmail.com \
    --to=vagnerrener@gmail.com \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.