From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files
Date: Fri, 22 Jan 2016 17:51:52 +0530 [thread overview]
Message-ID: <56A21EE0.5060901@toradex.com> (raw)
In-Reply-To: <CAEUhbmWoctOrf7vVvUeFM-0KdAuFzxYVr2_KF_Lu1W4eGZvP2A@mail.gmail.com>
On 01/22/2016 03:22 PM, Bin Meng wrote:
> Hi Bhuvanchandra,
>
> On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
> <bhuvanchandra.dv@toradex.com> wrote:
>> Add device tree files and enable serial support
>> ---
>> arch/arm/dts/Makefile | 3 ++-
>> arch/arm/dts/vf610-twr.dts | 27 +++++++++++++++++++++++++++
>> configs/vf610twr_dtb_defconfig | 13 +++++++++++++
>> 3 files changed, 42 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/dts/vf610-twr.dts
>> create mode 100644 configs/vf610twr_dtb_defconfig
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index f66ff41..c6fb50c 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -190,7 +190,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
>> sun9i-a80-cubieboard4.dtb
>>
>> dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
>> - vf610-colibri.dtb
>> + vf610-colibri.dtb \
>> + vf610-twr.dtb
>>
>> dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
>> k2l-evm.dtb \
>> diff --git a/arch/arm/dts/vf610-twr.dts b/arch/arm/dts/vf610-twr.dts
>> new file mode 100644
>> index 0000000..8f86a80
>> --- /dev/null
>> +++ b/arch/arm/dts/vf610-twr.dts
>> @@ -0,0 +1,27 @@
>> +/*
>> + * Copyright 2016 Toradex AG
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+ or X11
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>
> Since there is already SPDX license, we can remove the full one.
Okay.
>
>> +/dts-v1/;
>> +#include "vf.dtsi"
>> +
>> +/ {
>> + model = "VF610 Tower Board";
>> + compatible = "fsl,vf610-twr", "fsl,vf610";
>> +
>> + choosen {
>> + stdout-path = &uart1;
>> + };
>> +
>> +};
>> +
>> +&uart1 {
>> + status = "okay";
>> +};
>> diff --git a/configs/vf610twr_dtb_defconfig b/configs/vf610twr_dtb_defconfig
>
> _dtb again?
>
>> new file mode 100644
>> index 0000000..24a7223
>> --- /dev/null
>> +++ b/configs/vf610twr_dtb_defconfig
>> @@ -0,0 +1,13 @@
>> +CONFIG_ARM=y
>> +CONFIG_TARGET_VF610TWR=y
>> +CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
>> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
>> +# CONFIG_CMD_IMLS is not set
>> +# CONFIG_CMD_SETEXPR is not set
>> +CONFIG_NAND_VF610_NFC=y
>> +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
>> +CONFIG_SPI_FLASH=y
>> +CONFIG_DM=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DM_SERIAL=y
>> +CONFIG_FSL_LPUART=y
>> --
>
> Please reorder this via 'make savedefconfig'.
>
> Regards,
> Bin
>
--
Best regards,
Bhuvan
next prev parent reply other threads:[~2016-01-22 12:21 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 1/7] arm: vf: Enable lpuart support Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV [this message]
2016-01-22 7:49 ` [U-Boot] [PATCH 4/7] arm: pcm052: " Bhuvanchandra DV
2016-01-22 9:53 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 5/7] dm: lpuart: Drop the legacy code Bhuvanchandra DV
2016-01-22 9:54 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 6/7] arm: vybrid: Drop enabling serial in legacy mode Bhuvanchandra DV
2016-01-22 9:54 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs Bhuvanchandra DV
2016-01-22 9:55 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV
2016-01-22 16:38 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A21EE0.5060901@toradex.com \
--to=bhuvanchandra.dv@toradex.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.