Re: [PATCH 3/3] iio: mma8452: add support for MMA8451Q

[Jonathan Cameron <jic23@kernel.org>]

On 16/01/16 14:35, Martin Kepplinger wrote:
> This adds support for this series' 14 bit accelerometer chip, MMA8451Q.
> It's datasheet is available at the vendor's website:
> 
> https://cache.freescale.com/files/sensors/doc/data_sheet/MMA8451Q.pdf
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Applied to the togreg branch of iio.git - initially pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  .../devicetree/bindings/iio/accel/mma8452.txt      |  4 ++-
>  drivers/iio/accel/Kconfig                          |  2 +-
>  drivers/iio/accel/mma8452.c                        | 42 ++++++++++++++++++----
>  3 files changed, 40 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
> index 3c10e85..165937e 100644
> --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
> +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
> @@ -1,8 +1,10 @@
> -Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
> +Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC
> +triaxial accelerometer
>  
>  Required properties:
>  
>    - compatible: should contain one of
> +    * "fsl,mma8451"
>      * "fsl,mma8452"
>      * "fsl,mma8453"
>      * "fsl,mma8652"
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index edc29b1..d9feaa3 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -143,7 +143,7 @@ config MMA8452
>  	select IIO_TRIGGERED_BUFFER
>  	help
>  	  Say yes here to build support for the following Freescale 3-axis
> -	  accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
> +	  accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
>  
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called mma8452.
> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
> index 843169e..7f4994f 100644
> --- a/drivers/iio/accel/mma8452.c
> +++ b/drivers/iio/accel/mma8452.c
> @@ -1,6 +1,7 @@
>  /*
>   * mma8452.c - Support for following Freescale 3-axis accelerometers:
>   *
> + * MMA8451Q (14 bit)
>   * MMA8452Q (12 bit)
>   * MMA8453Q (10 bit)
>   * MMA8652FC (12 bit)
> @@ -85,6 +86,7 @@
>  #define  MMA8452_INT_FF_MT			BIT(2)
>  #define  MMA8452_INT_TRANS			BIT(5)
>  
> +#define MMA8451_DEVICE_ID			0x1a
>  #define MMA8452_DEVICE_ID			0x2a
>  #define MMA8453_DEVICE_ID			0x3a
>  #define MMA8652_DEVICE_ID			0x4a
> @@ -942,6 +944,14 @@ static struct attribute_group mma8452_event_attribute_group = {
>  	.num_event_specs = ARRAY_SIZE(mma8452_motion_event), \
>  }
>  
> +static const struct iio_chan_spec mma8451_channels[] = {
> +	MMA8452_CHANNEL(X, idx_x, 14),
> +	MMA8452_CHANNEL(Y, idx_y, 14),
> +	MMA8452_CHANNEL(Z, idx_z, 14),
> +	IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
> +	MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
> +};
> +
>  static const struct iio_chan_spec mma8452_channels[] = {
>  	MMA8452_CHANNEL(X, idx_x, 12),
>  	MMA8452_CHANNEL(Y, idx_y, 12),
> @@ -975,6 +985,7 @@ static const struct iio_chan_spec mma8653_channels[] = {
>  };
>  
>  enum {
> +	mma8451,
>  	mma8452,
>  	mma8453,
>  	mma8652,
> @@ -982,17 +993,34 @@ enum {
>  };
>  
>  static const struct mma_chip_info mma_chip_info_table[] = {
> -	[mma8452] = {
> -		.chip_id = MMA8452_DEVICE_ID,
> -		.channels = mma8452_channels,
> -		.num_channels = ARRAY_SIZE(mma8452_channels),
> +	[mma8451] = {
> +		.chip_id = MMA8451_DEVICE_ID,
> +		.channels = mma8451_channels,
> +		.num_channels = ARRAY_SIZE(mma8451_channels),
>  		/*
>  		 * Hardware has fullscale of -2G, -4G, -8G corresponding to
> -		 * raw value -2048 for 12 bit or -512 for 10 bit.
> +		 * raw value -8192 for 14 bit, -2048 for 12 bit or -512 for 10
> +		 * bit.
>  		 * The userspace interface uses m/s^2 and we declare micro units
>  		 * So scale factor for 12 bit here is given by:
> -		 *	g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
> +		 * 	g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
>  		 */
> +		.mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} },
> +		.ev_cfg = MMA8452_TRANSIENT_CFG,
> +		.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
> +		.ev_cfg_chan_shift = 1,
> +		.ev_src = MMA8452_TRANSIENT_SRC,
> +		.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
> +		.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
> +		.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
> +		.ev_ths = MMA8452_TRANSIENT_THS,
> +		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
> +		.ev_count = MMA8452_TRANSIENT_COUNT,
> +	},
> +	[mma8452] = {
> +		.chip_id = MMA8452_DEVICE_ID,
> +		.channels = mma8452_channels,
> +		.num_channels = ARRAY_SIZE(mma8452_channels),
>  		.mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} },
>  		.ev_cfg = MMA8452_TRANSIENT_CFG,
>  		.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
> @@ -1173,6 +1201,7 @@ static int mma8452_reset(struct i2c_client *client)
>  }
>  
>  static const struct of_device_id mma8452_dt_ids[] = {
> +	{ .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] },
>  	{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
>  	{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
>  	{ .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] },
> @@ -1209,6 +1238,7 @@ static int mma8452_probe(struct i2c_client *client,
>  		return ret;
>  
>  	switch (ret) {
> +	case MMA8451_DEVICE_ID:
>  	case MMA8452_DEVICE_ID:
>  	case MMA8453_DEVICE_ID:
>  	case MMA8652_DEVICE_ID:
>